|
|
Home with hospice care
Holohlavská, Lenka ; Burianová, Lenka (referee) ; Smolka, Radim (advisor)
The main goal of this diploma project is detailed design documentation of the House with hospic care, Litomyšl. The building consists of two upper ground floor levels. First ground floor is partially recessed into the terrain. The layout responds to the main purpose of the building - healthcare and social centre. Hospic is located on the edge of the city, it has the L-shaped form. The area with rooms for patients is distributed along the southern facade. The objective of connecting the interior and garden in the courtyard has been considered while forming the exterior finishing surfaces. The capacity of the hospice centre is 15 beds. The building structure is made of masonry walls with reinforced concrete slabs and combination of single sloped roof with flat roof.
|
|
|
Multifunctional Building
Kika, Aleš ; Podroužková, Božena (referee) ; Jeneš, Rostislav (advisor)
The project deals the part of the structure of multifunctional building . It is a multi-storey building. In this project are designed slab, basement wall, continous footing, column and footing . Static system and the calculations of the internal forces was conducted in a student version of Scia Engineer 2012.
|
|
|
Reinforced concrete structure of an apartment block
Čairović, Dorde ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
The master thesis is aimed for design and assessment of main bearing segments of reinforced concrete structure of apartment block: monolithic reinforced concrete slab over the second floor, foundation slab, stairway slab, pillar and wall beam. Constituent part of the thesis is also drawing documentation of reinforcement of selected segments. Calculation of the internal forces is made at graphical software system Scia Engineer.
|
|
|
Multifunctional Building
Majsniar, Michal ; Kalivoda, Tomáš (referee) ; Kalousek, Lubor (advisor)
Master thesis „Multifunctional Building“ is composed in the form of project documentation. Designed building is situated close to the Svitava river. The supporting structure in the basement is designed from shutter shaped pieces Best and the other storages from the system Ytong. The armoured concreted slab is designed for the ceilings. The roof is drawn as platform. The whole building will be insulated for recommended values. The facade in the first storage is designed as ventilated Novabrick and in the other storeys the facade will be from plaster Cemix. The building has three storages and partly basement. The building consists of centre for rehabilitation, shop and three flats. The drawings are compiled in CAD program.
|
|
|
Residential house
Jakoubě, Jiří ; Bolkovec, Martin (referee) ; Donaťáková, Dagmar (advisor)
The master’s thesis dealt with newly built residential house. The building is located in the Liberec region in the cadastral land parcel number 42/1 in the cadastral area Liberec-Rochlice. Address of the building is 227 Vratislavická Liberec-Rochlice 460 59th Built up area is 655 m2. The new building is located on sloping ground to the south. The building is located on the still undeveloped parcel near residential homes and nursing home. The building is partially basement with four floors. In the basement is the technical support for building, storage and parking facilities. The first two floors are commercial applications for administrative operations. In the third and fourth floor apartments are located. In total there are five residential units for a total of 17 persons. The supporting structure of the building is a monolithic reinforced concrete deck Beon C 25/30 B and reinforcement 500th The building is based on the footings of plain concrete C 16/20, and the bases of concrete and plate C 25/30 and the reinforcement B 500th Outer and inner walls are lined walls in the system Porotherm. The roof is designed as a flat. Walk-on part is designed as extensive or as a patio with concrete paving. Nepochúzná part has a stabilizing layer of gravel.
|
|
|
Some aspects of reinforced concrete slabs
Bartosch, Václav ; Vlk, Zbyněk (referee) ; Zídek, Rostislav (advisor)
The topic of this bachelor thesis is a simple reinforced concrete ceiling construction which has a rectangular ground plan and it is locally supported by square columns. Plane models of the same board but with different types of support are made. The board is calculated by the classical method of summary moments to be checked and compared the results. The work focuses mainly on the process of bending moments at the point of support. Waveforms of moments in the adjoining fields are listed here for completion. The results of static models are compared with the results of the summary moments method. The final part of this work is focused on the waveforms of moments after the formation of cracks.
|
|
|
Reinforced concrete structure of a family house
Polák, Marek ; Matušíková, Anna (referee) ; Šulák, Pavel (advisor)
The bachelor's thesis deals with the static design of two variant ceiling construction of family house and their economic comparison. Firs variant is reinforced concrete slab, and the other is half prefabricated ceiling HELUZ MIAKO. The thesis also deal with design and assessment foundation lane. Calculation of internal forces is made by software system SCIA Engineer and this results are compared with results of simplified method. Design, assessment and drawing documentation were made by the valid standards on these calculations.
|
|
| |
|
|
Comparison of alternatives house ceiling
Jarmara, Pavel ; Šulák, Pavel (referee) ; Laníková, Ivana (advisor)
Main goal of this bachelor thesis is design, assesment and comparison of two variations on ceilling construction specifically between reinforced concrete slab and system from company Porotherm – beams and floor block Miako. Internar forces are calculated both in Scia Engineer 2013.1 and manually. Secondary goal consists in designing and assessing of reinforced concrete stairway. Drawn design of this suggested construction is included in this thesis.
|
|
|
Design of the selected parts of the concrete object
Hrvolová, Markéta ; Horák, David (referee) ; Švaříčková, Ivana (advisor)
The aim of the bachelor´s thesis is the static solution of the selected parts of the reinforced concrete object with drawing documentation included. Project describes the design and assessment of the monolitic slab structure and stairway slab by the first and second limit state. As the part of the thesis is the attachment describing the process of modeling the truss structure. For calculation of the internal forces was used software Scia Engineer.
|
guest ::
