|
|
Analyse and Optimise Production Process of Prototypes
Hamr, Tomáš ; Zatloukal, Miroslav (referee) ; Starý, Jiří (advisor)
This diploma thesis summarizes basic findings about issues of making development samples of PCB. The emphasis is especially on required quality which complies with mentioned norms. The theoretical section includes methodology for evaluating quality dismounted boards, assembling and soldering, parameters of components under different environmental circumstances. The practical part is carried out in cooperation with the department EEG in R&D Automotive Lighting Jihlava. It is dedicated to the design and the preparation of development samples where the quality is assessed according to given methodology from the theoretical part. PCB are analyzed by an X-ray, metallographic grinding and other methods. Recommendations are given and based on results for improvements.
|
|
|
Emerging Trends in Dendrochronology
Horáček, Tomáš ; Neuwirthová, Ludmila (referee) ; Mikulka, Jan (advisor)
Tato práce se zabývá popisem současných a experimentálních metod odběru vzorků pomocí presslerova nebozezu, výřezů z kmene, fotografie, rentgenu, počítačové tomografie a magnetické rezonance na poli dendrochronologického výzkumu. V práci jsou rozebírány destruktivní a nedesktruktivní metody odběru vzorků. Je také kladen důraz na původ vzorků: zdali je možno využít destruktivní metody nebo zdali je to nemožné jako v případě vzácných archeologických objektů. Dále popisuje standardní optometrickou metody a další experimentální metody fungujicí na principu kontranstního zpracování obrazu za účelem rozeznání letokruhů. V práci jsou také popsány různé druhy metod softwarového zpracovnání kde jako vstup slouží buď série dat nebo obraz letokruhů. Další rozdíly tvoří vymezené spektrum uvedených prací, některé práce se zaměřují na zpracování obrazu od píky tedy od pořízené fotografie až po hotové datovaní, některé však zajímá pouze úzký sektor dendrochronologie jako jsou například vady či špatně rozeznatelné letokruhy.
|
|
|
Detection, Extraction and Measurement of the Length of the Metacarpal Bones in X-Rays of the Human Hand
Chalupnik, Alexandr ; Rydlo, Štěpán (referee) ; Drahanský, Martin (advisor)
The aim of the bachelor thesis is the design and implementation of an algorithm for the detection, extraction and measurement of the length of the metacarpal bones in x-rays of the human hand. The first part is focused on the principles of x-rays and the anatomy of the human hand. The second part contains the design and implementation of the task. The algorithm is based on image processing methods, such as thresholding or edge detection. In the end, the measurement results are evaluated on a set of images, which were provided by the Department of Anthropology at Masaryk University.
|
|
|
Design of metal detector and X-ray luggage scanner
Fridrichová, Eva ; Paliatka, Peter (referee) ; Zvonek, Miroslav (advisor)
Subject of this Diploma thesis is the design of metal detector and luggage X-ray screening. The thesis concerns with design of frame metal detector and luggage x-ray with focus on visual appeal, keeping of functional elements and concept of construction solution. Main objective is to find solution how to connect aesthetic, ergonomic and technical aspect. Complete analysis leads to design of metal detector and luggage X-ray screening. These appliances then appeal as compact system with uniform design. Also the machines can be used separately. Design of this system of appliances is solved through ergonomic, psychologic, technical and aesthetic aspects.
|
|
|
Security Conception of Brno Turany Airport
Loučka, Karel ; Sedláček, Jaromír (referee) ; Janík, Radomír (advisor)
In my thesis I address improvement of safety system of an international airport in Brno-Turany. I perform an analysis of current legislative safety needs and description of EU airport issues. I define particular safety requirements in reference to Brno-Turany airport. In the last part of my paper I suggest safety system that takes advantage of up to date technologies and recommendation to secure safety.
|
|
|
Set possible causes for capacity loss of capacitors
Fabiánek, Marcel ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
This thesis deals with formation of defects on through-hole capacitors. Process of wave soldering and its steps are described in the first part. The listing and description of possilble defects caused by wave soldering is followed after the first part. There are several sources of potential causes of capacity loss and a separate chapter to these causes. The last part contains a proposal of testing individual potencional causes. Their purpose is to reveal the root causes of formation of the defects and then the practical solution is described.
|
|
|
Lead-Free Voids Cause Mechanisms and Influence on Reliability
Šimon, Vojtěch ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
The aim of this work is to analyze reliability of lead-free solder join, in particular the voids generated during the soldering process. The main target of the theoretical part of the work is to isolate basic mechanisms of formation of the voids and optimize the soldering process. The practical part of the paper is based on monitoring the count and size of the voids in a solder join. An X-Ray tomograph has been chosen as a non-destructive method of detection. The statistical part of this work compares conventional soldering of the entire board with local soldering by IR radiation.
|
|
|
Detection methods of energetic materials
Procházka, Michal ; Diviš, Pavel (referee) ; Friedl, Zdeněk (advisor)
A research on current methods of detection of explosives and related materials was made. At first the thesis studies methods of detection and analysis of explosives including chromatographic methods (TLC, GC, HPLC, IC), mass spectrometry and its variations, ion mobility spectrometry and infra-red spectroscopy. Next the attention is placed on detection of explosives in solid phase by X-ray detection, nuclear magnetic and quadrupole resonance and thermal neutron activation. Practical applications of these methods are of great importance in this thesis as well as their usage in the counterterrorist fight.
|
|
| |
|
|
Reliability of LED Panels Solder Joints
Šimon, Vojtěch ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
Thesis is focused on the effect of heating factor on quality of solder joints. In theoretical part is solved reflow soldering technology, problematice of solder paste choice or criteria of soldering profile setting. The practical part is dedicated to demonstrating the impact of heating factor on solder joint quality. There are used X-Ray analysis, microsections and electron microscopy. In the final part of this thesis are summarized knowledge from theoretical part and experimental obtained results to defend of next steps in diploma thesis.
|
guest ::
