|
|
Industrial Bakery Brno
Lipovská, Kristýna ; Petr,, Suchánek (referee) ; Nový, Alois (advisor)
The theme of the bachelor's thesis is the design of an industrial bakery in Brno Černovice. The work is based on an architectural study, processed within the course BGA036 Atelier of Architectural Creation 5. The solved area is located in the city district of Brno – Černovice at the Švédské valy Street. This area is designated for industrial development in accordance with the applicable planning area and the design of the addressed building is intended to contribute to the development of the site. It is a large undeveloped brownfield, and the newly designed building is the first development on the land in question. To allow further brownfield development, the building is situated in the southeastern part of the territory at its very beginning. The site will be connected to a newly proposed public road from the Švédské valy Street, and a territorial reserve will be maintained around the facility for possible production expansion. The industrial activity on the site is intended to expand the production capacity of bakery company Herold and to bring the area of the largest outlet closer. It will be focused on the production of rolls, bread and regular pastries. The site consists of a production building, which is logically divided according to the needs of individual operations and paved area, allowing the movement of supply vehicles, expedition vehicles, passenger cars, cycle transport and, last but not least, pedestrians. The building consists of the following parts: an administration building with facilities for office workers and dressing rooms of production staff, as well as supply and storage economy, its downstream production, which seamlessly goes into operation of the expedition preparation and the goods expedition. The site also includes all technical facilities as well as waste management. The site was designed with sustainability and climatic conditions in mind. The flat roofs are designed as vegetation and the largest area of roofing of the production operation is designed to install photovoltaic panels, ensuring partial energy self-sufficiency of the building.
|
|
|
Comparison of profitability in companies of domestic and foreign owners
ZELNÍKOVÁ, Zuzana
This study focuses on a comparison of the profitability of companies with domestic and foreign owners operating in the Czech Republic. The aim of the output of the study is to evaluate the performance of enterprises depending on the group of owners and to identify the factors influencing their profitability. The first part of the thesis deals with a literature search on profitability, profit, profitability ratios and return on equity (ROE) decomposition. In the practical part, individual enterprises within the manufacturing industry are analysed and classified according to the type of owner and industry. Subsequently, the sectors are compared between the owner groups and insights on the effectiveness of profitability ratios are obtained.
|
|
|
Automated Planning and Scheduling in Manufacturing
Bucher, Michal ; Kočí, Radek (referee) ; Hrubý, Martin (advisor)
Thesis deals with a problem of automated planning and scheduling in manufacturing. Problem is formally defined by mathematical model Resource Constrained Project Scheduling Problem. Based on this model scheduling system was developed, which is using the optimizer based on Genetic algoritms. Developed system was then tested in real manufacturing. System can also visualize schedules in form of Gantt chart.
|
|
|
Creation of Production Scheduling to Implement Customer Requirements
Holík, Radim ; Jaroš, Miroslav (referee) ; Jurová, Marie (advisor)
Discovering deficiencies in production tasks schedule of the TOS Kuřim – OS, a. s. company was the main impulse for creation of this master’s thesis. Analysis of provided data together with theoretical basis of relevant literature have created a basis for the suggestion. It’s the implementation of a newly designed process, which would reduce or fully eliminate deficiencies during its periodic execution. These suggestions also include a practical example of the process application.
|
|
|
Production of the "truss beam" component in a smaller engineering company
Šmerda, Michal ; Chladil, Josef (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis describes manufacturing of the "trussed beam" component in a small engineering company. This work is divided to several parts. The first part consists of theoretical points, which describes selected economic terms, terms about manufacturing and specific engineering technologies. Part two contains an analysis of the current state. In part three is created proposal solving, which including a product price calculation and proposal for streamlining production process and technological and economic evaluation.
|
|
|
Rationalization of production technology body
Dostál, Martin ; Chladil, Josef (referee) ; Osička, Karel (advisor)
In the introductory part of the thesis, there is a description of machining technologies used in the production of body. This is followed by a detailed analyse of the current technology of production of this component with an emphasis on finding its problematic parts, including a proposal of the options of the rationalization. After the methods of rationalization assesment, a new technological process was developed and the alternative tools were proposed. Considerable time and money savings were achieved by this rationalization. In the discussion section, there were designed some options of solving problems arising during the installation of this rationalization into working.
|
|
|
Production logistics
Olej, Tomáš ; Vaněk, Jiří (referee) ; Špinka, Jiří (advisor)
This master’s thesis deals with manufacturing and logistic issues of low voltage cabinets produced by ProCS, s.r.o. company. The aim is to design and evaluate manufacturing and assembling process rationalization proposal. The proposal is based on familiarization with technological process of cabinet's manufacturing. Becoming familiar with manufacturing and assembling process of marshalling and system cabinets made it possible to find an opportunity of rationalization through automation of selected assembling processes. Automation of striping and crimping process is possible through suitable crimping machine. Situation before and after rationalization is economically interpreted and evaluated using break even point analysis. Through mentioned rationalization arrangement it is possible to improve manufacturing flexibility, reduce lead times and cut down manufacturing costs.
|
|
| |
|
| |
|
| |
guest ::
