|
Comparison of different approaches in ab initio modeling of mechanical and magnetic properties of materials
Čavojec, Martin ; Řehák, Petr (oponent) ; Zelený, Martin (vedoucí práce)
This thesis studies the influence of the quantum-mechanical description of interatomic interactions on the results of ab initio calculations of magnetic and mechanical properties of Fe, -TiAl and Ni2MnGa. Two methods for the description of interactions were examined, the projector-augmented wave method and the linear combination of atomic orbitals, implemented in ab initio codes VASP and SIESTA, respectively. The results of the dependence of the magnetic moments on the volume or tetragonal deformation paths indicate relative comparability across these two methods. However, calculated elastic constants also point to the unsuitability of the SIESTA software for calculations of elastic constants using the stress-strain method. Additionally, as a part of the thesis, a script for the calculation of elastic constants was created in the programming language Python.
|
| |
|
Odlitky ze slitin TiAl pro spalovací motory
Kašpar, Jan ; Záděra, Antonín (oponent) ; Zemčík, Ladislav (vedoucí práce)
Práce je zaměřena na intermetalické slitiny TiAl. Rozbor jejich mikrostruktury včetně vlivu tepelného zpracování a legujících prvků. Dále se zabývá tavením a odléváním TiAl včetně bezpečnosti a procesu recyklace. V poslední části se věnuje využití slitiny v praxi se zacílením především na ventily spalovacích motorů.
|
|
Odlitky ze slitin TiAl pro turbodmychadla
Kudýn, David ; Malec, Silvestr (oponent) ; Zemčík, Ladislav (vedoucí práce)
Práce se zaměřuje na rozbor intermetalických slitin TiAl. Nejprve rozebírá jejich vlastnosti a jejich změny na základě jejich zpracování a ovlivňování legujícími prvky. Následně jsou zde uvedeny možnosti využití v praxi. Pozornost je soustředěna především na turbodmychadlová kola a jejich porovnání s konvenčními materiály. Dále jsou zde rozebrány jednotlivé způsoby tavení a odlévání a s nimi spojené materiály pro tavící kelímky a formy. Na závěr se práce zabývá možnostmi recyklace zbytkového materiálu.
|
|
Comparison of different approaches in ab initio modeling of mechanical and magnetic properties of materials
Čavojec, Martin ; Řehák, Petr (oponent) ; Zelený, Martin (vedoucí práce)
This thesis studies the influence of the quantum-mechanical description of interatomic interactions on the results of ab initio calculations of magnetic and mechanical properties of Fe, -TiAl and Ni2MnGa. Two methods for the description of interactions were examined, the projector-augmented wave method and the linear combination of atomic orbitals, implemented in ab initio codes VASP and SIESTA, respectively. The results of the dependence of the magnetic moments on the volume or tetragonal deformation paths indicate relative comparability across these two methods. However, calculated elastic constants also point to the unsuitability of the SIESTA software for calculations of elastic constants using the stress-strain method. Additionally, as a part of the thesis, a script for the calculation of elastic constants was created in the programming language Python.
|
|
Odlitky ze slitin TiAl pro spalovací motory
Kašpar, Jan ; Záděra, Antonín (oponent) ; Zemčík, Ladislav (vedoucí práce)
Práce je zaměřena na intermetalické slitiny TiAl. Rozbor jejich mikrostruktury včetně vlivu tepelného zpracování a legujících prvků. Dále se zabývá tavením a odléváním TiAl včetně bezpečnosti a procesu recyklace. V poslední části se věnuje využití slitiny v praxi se zacílením především na ventily spalovacích motorů.
|
|
Odlitky ze slitin TiAl pro turbodmychadla
Kudýn, David ; Malec, Silvestr (oponent) ; Zemčík, Ladislav (vedoucí práce)
Práce se zaměřuje na rozbor intermetalických slitin TiAl. Nejprve rozebírá jejich vlastnosti a jejich změny na základě jejich zpracování a ovlivňování legujícími prvky. Následně jsou zde uvedeny možnosti využití v praxi. Pozornost je soustředěna především na turbodmychadlová kola a jejich porovnání s konvenčními materiály. Dále jsou zde rozebrány jednotlivé způsoby tavení a odlévání a s nimi spojené materiály pro tavící kelímky a formy. Na závěr se práce zabývá možnostmi recyklace zbytkového materiálu.
|
| |
|
THE EFFECT OF MO AND/OR C ADDITION ON MICROSTRUCTURE AND PROPERTIES OF TIAL ALLOYS
Chlupová, Alice ; Kruml, Tomáš ; Roupcová, Pavla ; Heczko, Milan ; Obrtlík, Karel ; Beran, Přemysl
Cast TiAl alloys with high Nb content are subject of extensive research with the aim to develop material with low density, good corrosion resistance and high strength at elevated temperatures. Disadvantage of their broad applications is restricted workability, machinability and low fracture toughness especially at room temperature. Improvement of properties of TiAl based materials can be achieved by tailoring the microstructure by modification of chemical composition. For this purpose 5 types of TiAl alloys with 7 % of Nb were prepared having variable content of Mo and/or C. Addition of Mo and/or C resulted in three types of microstructure and different phase composition. All modified alloys contain colonies consisting of thin lamellae of a and g phases sometimes complemented by g and/or b phase at the grain boundaries. Variable microstructure and phase composition resulted in differences in mechanical behaviour. The most promising tensile properties at both room and elevated temperature were observed for alloy doped with 2 % of Mo having the mixed microstructure containing b phase and for alloy doped with 0.5 % of C with nearly lamellar microstructure without b phase. 2Mo alloy exhibited reasonably good ductility while 0.5C alloy reached the highest tensile strength. Also low cycle fatigue behaviour of these two materials was the best of all five materials under investigation. Fatigue deformation characteristics were better in the case of 2Mo alloy while 0.5C alloy exhibited higher cyclic stresses. Fracture mechanisms were determined using fractographic analysis. The major fracture mode of all alloys was trans-lamellar.
|
|
High Temperature Fatigue Behaviour of Third Generation of TiAl Alloys
Obrtlík, Karel ; Kruml, Tomáš
Low cycle fatigue properties of lamellar TiAl with 7.8 at.% Nb were studied at four temperatures: room temperature, 700, 750 and 800 °C. Up to 750 °C, stable cyclic behaviour is observed while cyclic softening is characteristic for 800°C. The strength of the alloy is still high even at 800 °C. The TEM observation did not reveal any substantial changes in the microstructure due to the cycling at RT. At 750 °C, the lamellar structure was in some places destroyed by cyclic plasticity and pure g-phase islands with high density of dislocation debris were formed. At 800 °C, the domains without lamellar structure cover about 10% of inspected volume and are almost dislocation free. The results show that the diffusion processes leading to vanishing of small prizmatic dislocation loops start to operate between 750 and 800 °C. The destruction of lamellar microstructure and annealing of dislocation debris is the reason for cyclic softening at 800 °C.
|