|
|
Immobilised palladium catalysts
Demel, Jan ; Štěpnička, Petr (advisor) ; Vohlídal, Jiří (referee) ; Jirátová, Květa (referee)
Shrnutí V rámci této diplomové práce byl připraven nový komplex [RuCl2(46-1-iso- propvl-4-nrethvlbenzen) { 1'- (dífenvlfosfi no) ferrocenkarboxvlová kvselina-rc P}] a byla stanovena jcho struktura rcntgcnovou difrakcí na monokrystalu. Na tttesoporézltírnolekulové Síto MCM-41 byl zakotvelr kornplex rutltelria dvěuta způsoby.V prvním případě, kdy byla na MCM-41 nejprve zakotvena Hdpf a poté ruthenatý komplex' došlo pravděpodobně k nezávislému zakotvení obou látek. V druhém případě byl ruthenatý konrplex zakotven přímo bez fosfinového linkeru. Tyto molekulový i oba lreterogenni katalyzátory byly použity ke stu- dirt reakce propargylalkoholu s kyselinou benzoovou , za vznikt 2_oxopropvl_ bcnzoátu. oba hctcrogcnní katalyzátory mčlypodobnou aktivitu, cožuka- zuje,že v tottrto případě nezáleželo Ita přítolttttosti fosfinovélro ligandu. Velrrri nízká aktivita heterogenních katalyzátorů v porovnání s homogenním byla způsobena paralelní reakcí propargylalkoholu s křemičitanovým molekulo- vým sítem MCM-41 na neidentifikovaný, pravděpodobně polymerní produkt. Bylo zjištěno, žekatalytická centra se z heterogenních kata|yzátorů vymý- vají, ale v tak malém množství,žerrmožtiu.jíminimálně ještě jedno porržití kataIyzátoru bez výrazné ztráty aktivity'
|
|
|
Novel conjugated polymers of the metallo-supramolecular and polyelectrolyte class
Hladysh, Sviatoslav ; Vohlídal, Jiří (advisor) ; Strachota, Adam (referee) ; Jindřich, Jindřich (referee)
This thesis targets the development of conjugated polymers with improved process ability from solutions. Two types of ionic polymers are addressed: (i) conjugated metallo-supramolecular polymers (MSPs) composed of conjugated heteroaromatic unimers (building blocks) linked to chains by various metal ions giving charged main chains, and (ii) polythiophene polyelectrolytes containing ionic pendants. Processing advantages of conjugated polyelectrolytes consist in the possibility of their processing from solutions in green solvents such as alcohols or even water. The advantages of MSPs consist in the thermodynamic control of the degree of polymerization (length) of their chains in solutions by the choice of solvent and temperature. As a result, MSPs reversibly provide systems of low viscosity that can be processed from solutions more easily than high-molar-mass polymers giving highly viscous solutions. Synthesis of appropriately designed unimer(s) is the key step of preparation of an MSP. Within this thesis, a series of novel unimers composed of linear oligothiophene type (mono-, bi-, ter- a thieno-thiophene- diyl) central blocks capped with 2,6-bis(oxazoline-2-yl)pyridine (pybox) or 2,6-bis(imidazole-2-...
|
|
|
Synthesis and properties of supramolecular polymers
Vitvarová, Tereza ; Vohlídal, Jiří (advisor) ; Jindřich, Jindřich (referee) ; Royal, Guy (referee)
New π-conjugated building blocks (unimers) for metallo-supramolecular polymers (MSPs), whose comprise: (i) substituted phosphole ring surrounded by two thiophene rings as the central block, (ii) 2,2':6',2''-terpyridine-4'-yl (tpy) end-groups as ion-selectors, and (iii) different linkers inserted between the central block and tpy end-groups, are described. Chemical and physical properties of those unimers were studied with attention on correlation between properties and structure of unimers. For example the unimer without linkers shows the UV/vis absorption maximum red shifted about 60 to 100 nm compared to bis(tpy)terthiophenes, which proves that replacing of the thiophene with phosphole unit significantly enhances the delocalization of electrons within the unimer molecule and significant area of absorption spectra can be covered. Introduction of linkers (ethynediyl, ethynediyl-thiophene-2,5-diyl, ethynediyl-1,4-phenylene) has a minor effect on the bandgap energy. All prepared unimers underwent self-assembling process with various metal ions (Co2+ , Cu2+ , Fe2+ , Ni2+ and Zn2+ ) resulting into metallo-supramolecular polymers. Three stages of the assembly of unimers into related MSPs were observed and characterized by absorption, fluorescence spectroscopy and size exclusion chromatography: 1)...
|
|
| |
|
|
Synthesis and characterization of conjugated polymers containing fluorene and thiophene units
Bondarev, Dmitrij ; Vohlídal, Jiří (advisor) ; Štěpánek, Petr (referee) ; Kmínek, Ivan (referee)
This Thesis is devoted to synthesis and characterization of conjugated polymers of three types: (i) copolymers of fluorene-based units with comonomers derived from benzene, anthracene and diphenyloxadiazole; (ii) copolymers combining new thiophene monomers carrying oxadiazole and triazole moieties with various comonomers. Copolymers are designed with the respect to the tuning the optical properties and an improvement in charge transport properties; (iii) polythiophene based polyelectrolytes of two types and the basic characterization of selected physical and optical properties is reported as well as a study of interactions with noble metal nanoparticles. An incorporation of oxadiazole side groups into the fluorene copolymers was followed by the substantial increase in the stability of emission (photoluminescence). Another increase in the emission stability was achieved by the substitution of alkyl side groups on fluorene for the aryl counterparts. Such a change resulted in almost complete suppression of the undesired green emission. Further method was the incorporation of anthracene monomeric units into the main chains which resulted in the best stabilization of emission. An experiment was also made in order to shed some light on the explanation of the mechanism of emission stabilization caused by...
|
|
| |
|
| |
|
| |
|
|
Control of the morphology of biodegradable polymer blends
Ostafińska, Aleksandra ; Šlouf, Miroslav (advisor) ; Kosek, Juraj (referee) ; Vohlídal, Jiří (referee)
This dissertation, entitled »Control of the morphology of biodegradable polymer blends«, has been running parallel with the grant project »Multiphase biodegradable polymer systems« and it represents a new research direction in the Department of morphology and rheology of polymer materials at the Institute of Macromolecular Chemistry. The main idea was to employ our long-lasting work and experience in the field of morphology control of synthetic polymer blends in the very analogous field of the biodegradable polymer blends. We have chosen three most common, widely used and relatively cheap bio-based polymers - starch, poly(lactic acid) and poly(ε-caprolactone) - in order to investigate how the properties of their blends might be improved if we control the blend morphology in targeted, reproducible and well-defined way from the very beginning. It has been well established that morphology (phase structure, supramolecular structure) is one of the key factors influencing final properties of polymer blends, including mechanical performance, rate of (bio)degradation, gas permeability etc. In this work, numerous preliminary experiments showed that there are two systems in which the morphology control could significantly help in the improving of their end-use properties: PLA/PCL/TiX (where PLA = poly(lactic acid),...
|
|
|
Catalytic synthesis of polyanilines
Bláha, Michal ; Vohlídal, Jiří (advisor) ; Omastová, Mária (referee) ; Trchová, Miroslava (referee)
This Ph.D. thesis is dealing with catalytic polymerization of aniline (ANI) and partially also of substituted anilines with FeCl3/H2O2 catalyst system, in which according to obtained results both active species, Fe3+ and HO , participate in the overall polymerization mechanism, creating a synergic system. The Fe3+ /H2O2 catalyst system, also called Fenton's system can considerably lower contamination of forming neat polyanilines (PANIs) by side-products characteristic of stoichiometric polymerization. However, catalytically prepared PANIs exhibit reduced conductivity related most probably to side reactions involving radicals generated as integral components of the FeCl3/H2O2 system. Catalytic polymerization of ANI with FeCl3/H2O2 system was found to be the reaction of approx. 2nd order with respect to ANI and gives PANIs of a good quality only when [H2O2] in the reaction mixture was kept low, i.e., at under- stoichiometric ratios [H2O2]/[ANI]. At over-stoichiometric ratio [H2O2]/[ANI], PANIs of lowered conductivity, worse spectroscopic characteristics and increased size of PANI nanostructures were obtained; nevertheless, these PANIs were not over-oxidized to pernigraniline state. The reaction-time profiles of the open-circuit potential of reaction mixtures exhibited an inflection related to the...
|
guest ::
RSS feed.