|
|
Exhibition pavilion
Nováček, Tomáš ; Šmak, Milan (referee) ; Sýkora, Karel (advisor)
Master´s thesis describes the structural design of the load bearing steel structure of exhibition hall located in Brněnské Výstaviště. The structure is designed according to the normative requirements of ČSN EN for ultimate and serviceability limit state. It´s structure formed by the parabolic main frames at a distance of 6 m apart, which are placed in a rectangular plan of 36 x 36 m. As the main material of load bearing elements was used a steel S355. The hall is designed for exhibitions and social occasions. The work contains a statical calculation, which assessed individual cross sections and joins.
|
|
|
Cowhouse in Králíky
Nováček, Tomáš ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
Bachelor thesis describes the structural design of the load bearing steel structure of cowhouse located in the municipality Králíky. The structure is designed according to the normative requirements of ČSN EN for ultimate and serviceability limit state. It´s a structure formed by the main frames at a distance of 5 m apart, which are placed in a rectangular plan of 30 x 60 m. As the main material of load bearing elements was used a steel S355. The specificity of the structure is location in a place with above average snow and wind loads. The couwhouse is intended for housing hundred and fifty cows. The work consists of a static calculation, which assessed individual cross sections and joints.
|
|
|
Porovnání ruční a mechanizované defoliace a hodnocení vlivu na kvalitu hroznů
Nováček, Tomáš
The thesis deals with the issue of defoliation after quality grapes. The work deals with the comparison of mechanical and manual defoliation. The first part deals with searching and displaying information with this issue. The second part is about my experiment, its processing and its own recommendations. I was able to do this experiment on the Plaček vineyard in Moravské Branice where I used 11 lines of Sauvignon blanc variety for the experiment when every line indicates another experiment variation. Defoliation zone of grapes took place since 7.6.2018. Manual defoliation always removed 1-3 leafs and other part from defoliation zone. Since 15.6.2018 we used a mechanized defoliation using the defoliator. The following experimental variations were made in the same terms both manually and mechanically. The last mechanical defoliation was on 1.7.2018 and we performed a defoliation variant as a control. The last attempts were made between 26.7 and 2.8.2018 where we used another method of defoliation zone of grapes for a purpose to slown down the ripening. During the ripening of the grapes their health and quality was monitored. In four weeks carried out the evaluation of qualitative grapes. The berry sugar content, Ph value, acid content, nitrogen content and other defoliation-related parameters were measured. All measurements were taking place at a school laboratory in Lednice. All data have been evaluated and we written own recommendations for winemakers and vineyard oweners.
|
|
|
Historické a krajové odrůdy jižní Moravy
Nováček, Tomáš
This Bachelor thesis deals with the historical development of viniculture and vineyard maintenance in South Moravia from the very beginning to the present. It highlights the most important and historical events which have influenced the current form of viniculture and viticulture in this region. The first part of my thesis defines the wine subregions of South Moravia.I analysed them from the geological and climatic point of view.It also considers the cultivation of different vine varieties. These vine varieties are sorted into groups concerning the quality and the gene affinity. The following part describes specific historical and regional vine varieties.I chose the region Křepice-Nosislav, which I,in this concept, desribe and map in detailes. The other part of my work mentions the "horenske law". This law contains the first historical rules for winemakers in the region around Židlochovice and Mikulov.
|
|
|
Exhibition pavilion
Nováček, Tomáš ; Šmak, Milan (referee) ; Sýkora, Karel (advisor)
Master´s thesis describes the structural design of the load bearing steel structure of exhibition hall located in Brněnské Výstaviště. The structure is designed according to the normative requirements of ČSN EN for ultimate and serviceability limit state. It´s structure formed by the parabolic main frames at a distance of 6 m apart, which are placed in a rectangular plan of 36 x 36 m. As the main material of load bearing elements was used a steel S355. The hall is designed for exhibitions and social occasions. The work contains a statical calculation, which assessed individual cross sections and joins.
|
|
|
Cowhouse in Králíky
Nováček, Tomáš ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
Bachelor thesis describes the structural design of the load bearing steel structure of cowhouse located in the municipality Králíky. The structure is designed according to the normative requirements of ČSN EN for ultimate and serviceability limit state. It´s a structure formed by the main frames at a distance of 5 m apart, which are placed in a rectangular plan of 30 x 60 m. As the main material of load bearing elements was used a steel S355. The specificity of the structure is location in a place with above average snow and wind loads. The couwhouse is intended for housing hundred and fifty cows. The work consists of a static calculation, which assessed individual cross sections and joints.
|
|
|
Implementation of improvement methods of industrial production
NOVÁČEK, Tomáš
Nováček, T. Implementation of improvement methods in manufacturing. České Budějovice 2010. Bachelor thesis. Jihočeská univerzita v Českých Budějovicích. College of education. Department of physics. Supervisor Ing. Michal Šerý. This thesis describes a real application of improvement methods in manufacturing. The methods are applied to the obsolete line having the attributes of industrial production 80th of the last century. The main objective of the project is to build a new, robust manufacturing process to a logical flow with adequate capacity of produce. Next, process must be effective and with low risk of customer complaints manufactured products. On this occasion, it was necessary to apply modern methods to analyze the current state and the future state. During the construction of benches are accounted and described the principles of ergonomics in order to minimize the burden on the line for workers and prepare them to working conditions that they work effectively achieved without losses.
|
guest ::
RSS feed.