|
|
Proportional counter measurement system
Horna, Aleš ; Matěj, Zdeněk (referee) ; Kubíček, Michal (advisor)
The thesis deals with gas-filled proportional counters intended for the detection of presence of ionising radiation and its properties. Proportional counters make it possible to find out about the type and energy of ionising particles. The thesis analyses the theory regarding the character of ionising radiation and its detection, describes the measuring apparatus used and the possibilities of verification of counters function. It also deals with the character of signals from the detectors and its imitation. It documents the measurements carried out with various sources of ionising radiation and interpretation of the acquired data, suggests and describes possible improvements of the measuring apparatus.
|
|
|
Motion sensor with identification
Halbich, Václav ; Matěj, Zdeněk (referee) ; Fedra, Zbyněk (advisor)
The solution of the motion detection system with the parallel radio identification on the same channel/carrier. The work is based on the RF sensor from ALPS Electric (product still in development phase), which works as an RF motion sensor and a digital transceiver as well. System can differenitiate general moving object from an object with active key. First part of this work describes the sensor module and the internal Nordic nRF24LE1 transciever (physical layer). Design of packet based communication protocol which does not influence motion sensing (communication layer) is discussed. Next part consist of FW design of application and identification protocol for sensor and key (application layer) and reference HW design of the active key. There are series of tests in every section.
|
|
|
Development of wireless rumen probe
Šídlová, Ludmila ; Matěj, Zdeněk (referee) ; Fedra, Zbyněk (advisor)
The aim was to study the possibilities of wireless transmission from the stomach of ruminants and to design and implement wireless ruminal probe. The first part deals with the internal wireless probe. The next section describes and evaluates available ruminal probe. There is given its own equipment design in the other chapters. The probe was designed for power management and for working with harvestable ambient power. The frequency of 125 kHz with bipolar coding was chosen for wireless data transmission. Two air coils are used on both sides as antennas. The proposed probe was designed and wireless data transmission was tested.
|
|
|
Proportional counter measurement system
Kolář, Ondřej ; Matěj, Zdeněk (referee) ; Kubíček, Michal (advisor)
This work focuses on development of a measurment system for proportional counters that are used to measure ionizing radiation. The system allows for data acquisition from proportional counters in form of time waveforms for further analysis. Core of the system is a Red Pitaya STEMlab 125-14 board which is able to record fast signals and transfer them to a computer for further processing. The first part of this work briefly describes theory of ionizing radiation and propotional counters. In the following part the measuring unit and its improvements are described. The main part of this work is focused on development of new software and description of individual software pieces. In the last part a real measurement is depicted, gathered data are analyzed and a machine learning method is proposed as a solution for proportional counters data analysis.
|
|
| |
|
|
Universal hardware platform supported Linux operation system
Skopal, Miroslav ; Matěj, Zdeněk (referee) ; Fedra, Zbyněk (advisor)
This thesis deals with the development problems and creating of the multi- purpose hardware platform, which supports operating system Linux. It is focused on the microprocessors using ARM architecture with architecture ARM7, ARM9 and ARM11. The scope of the first part of this thesis was searching the sales of available 32 bit ARM microprocessors. The second part is attended to a particular Mini2440 development kit, its animation and the subsequent development of the kernel drivers for OS Linux platform. One of this thesis details was also the development of my own expansive hardware module and a capacity keypad for a usage with Mini2440 developmental kit.
|
|
|
Utilization of ARM GCC toolchain
Ledvina, Jan ; Matěj, Zdeněk (referee) ; Fedra, Zbyněk (advisor)
The subject of this thesis is to study the existing development toolchain for the microprocessor LPC23xx in course MPOA. Main goal is to explore the feasibility of new development toolchain, based on the GCC. The outcomes of this thesis are demo applications with the microprocessor LPC2378 and the GCC. Parts of the outputs are also tutorials for the students, how to implement these demo applications. The demos include basic applications, RTOS and Ethernet
|
|
|
Stabilization of macroscopic particle in optical trap
Mlynář, Vojtěch ; Matěj, Zdeněk (referee) ; Brablc, Martin (advisor)
Cílem této práce je implementace a otestování algoritmů pro zpětnovazební stabilizaci částice v optické pasti. Tyto algoritmy jsou implementovány v programovatelném hradlovém poli Red Pitaya STEMlab 125-14 s využitím automatického generování kódu z modelů v programu Simulink. V práci je popsán fyzikální základ řízeného systému, jeho návaznost na teorii Kálmánova filtru, detaily implementovaných algoritmů v FPGA a procedury využité pro odhad parametrů. Implementované algoritmy byly úspěšně otestovány na reálné sestavě a výsledky jsou ukázány v závěru práce.
|
|
| |
|
|
Wireless communication modules for microcontrollers
Klíma, Jan ; Matěj, Zdeněk (referee) ; Fedra, Zbyněk (advisor)
The aim of this master’s thesis is analysis of wireless communication between mikroprocesors. The first part of the work are analysed the problems the wireless free ISM band. Mainly RFM12B and ZigBee module, which i these band work and ZigBee standart. The second part are described relazation board for both module. Further how programming ZigBee module. And at last programs for tested module.
|
guest ::
RSS feed.