|
|
Production of the distributor by non-convential forming technology
Blažek, Matěj ; Peterková, Eva (referee) ; Jopek, Miroslav (advisor)
The thesis is focused on the evaluation of the possibility of manufacturing a distributor body used for distribution of heat-bearing medium in underfloor heating. For the part, due to the series of 100 000 pieces·year-1, the technology of high-pressure hydrofroming without active action of axial presses is chosen. The original solution with a forming pressure of 58,5 MPa did not lead to success and an optimization was necessary, where the pressure was increased to 158,5 MPa, which also did not lead to success. This was followed by a further optimization consisting of hot forming at 700 °C and a pressure of 158,5 MPa, again with no successful solution. The last possible treatment option of changing the material to 11 321 steel and pressure 134,2 MPa was not successful and the high pressure hydrofroming method with passive action of axial dies is not recommended for industrial practice. The final step was an economic evaluation, where the price per piece was determined to be 133,3 CZK with a 20% margin. Considering that the product is suitable the profit will start to be generated after the production of 140 460 pieces.
|
|
|
Manufacturing of kitchen sink
Vágner, Lukáš ; Peterková, Eva (referee) ; Jopek, Miroslav (advisor)
The project deals with the design of production of the kitchen sink made of chromium-nickel austenitic steel 1.4301. Material thickness of the sink is 1 mm. The annual production series is 30,000 pieces. After considering the size of the produced series, a combination of shearing and deep drawing was chosen as the production technology. Shearing of the circular shape was combined with the execution of both draws into one production tool. For this design, the necessary calculations were performed along with verification by simulations in the PAM-STAMP program.The tool is clamped in a hydraulic press PO 400, which has all the necessary parameters. The coil blank is guided through the unwinding and straightening device Compact Line GLK3-1000. The selling price of one sink was set at CZK 1,300. Production becomes profitable after producing 7540 sinks.
|
|
|
Manufacturing of the turnbuckle of chain
Ondráček, Pavel ; Jopek, Miroslav (referee) ; Peterková, Eva (advisor)
The diploma thesis is focused on the design of the production technology of a chain tensioner. It is a spatial component made of 1.5 mm thick steel sheet with galvanized surface treatment. DC01 steel was selected as the most suitable material. When considering the production technologies, the production in a combined process tool was selected as the most efficient one for the series of 20,000 pieces. Regarding the tool of more complex design including springs, the production will be done in four steps on the LEN 63 eccentric press with accessories used for feeding and unwinding the metal sheet belt from the coil. The final price of the chain tensioner including the bolt and two nuts is 26 CZK.
|
|
|
The Study of the Contract Award in Production Company
Kováč, Matej ; Ing. Miroslav Jopek, Ph.D (referee) ; Jurová, Marie (advisor)
The thesis deals with the flow of the engagement through the company DIEFFENBACHER - CZ, hydraulické lisy, s. r. o., which produces machines and machine components for woodprocessing industry and hydraulic presses. Flow of a specific engagement is analyzed and deficencies are identified with the use of theoretical background. Subsequently, proposals of elimination of these deficiencies while rendering the whole process more effective are stated.
|
|
|
Manufacturing of the Wall Bracket
Fridrich, Ladislav ; Jopek, Miroslav (referee) ; Řiháček, Jan (advisor)
The bachelor's thesis deals with a suitable design of production technology for a wall bracket, which will serve as a speaker positioning system. The part is made of non-alloy structural steel S 235JR with a thickness of 3 mm. The production series is set at 200,000 pieces per year. After evaluating the production possibilities, the technology of bending and progressive cutting is chosen, which are combined in a combined tool. Subsequently, the most suitable arrangement of the part on the sheet metal strip is selected and the sheet metal coil is selected as a semi-finished product for production. Furthermore, technological calculations are performed and drawing documentation of the tool is made. Based on the calculated values, the production machine Mecanica Exacta model CC250 from the company Formetal s.r.o.
|
|
|
Manufacturing of a connecting pin by cold forming
Koumar, František ; Peterková, Eva (referee) ; Jopek, Miroslav (advisor)
The diploma thesis is focused on the optimization of the production of a rotary connecting pin, produced by bulk cold forming with a focus on upsetting and forward and backward extrusion. The resulting pin will be made of 1.4511 steel. From the three proposed variants of production processes, the optimal variant for four forming operations was selected. Extrusion tools are made of tool steel 19 830. A numerical simulation was performed to verify the suitability of the sequence of the selected variant. The size of the production batch is set at 700,000 pieces / year. In the technical and economic evaluation, the calculated production price of 1 piece of part was coMPared between machining and volume forming, at which the production costs amount to CZK 6,64. The return on this method, with an assumed profitability of 10%, was found for 568 182 pieces produced.
|
|
|
Manufacturing of mirrors clamp
Večeřa, Jaromír ; Jopek, Miroslav (referee) ; Podaný, Kamil (advisor)
This thesis presents a proposal for manufacturing of a mirror clamp, used for wall mounting. The clamp is made of stainless steel 1.4301 with a thickness of 1 mm. Manufacture series produces 40,000 pcs/year. After considering the individual manufacturing options, production in the combined process tool was chosen. The manufacture takes place in five steps, the utilization of the material is 84.1 %. This was completely proved by technological, design and control calculations. According to these calculations, a tool was designed with all of the technical documentation. Due to the forming force of 180 kN and the work of 113 kJ, the eccentric press T-30 CE from the company SanGiacomo Presse was chosen.
|
|
|
Innovative production of the brake segment
Vágner, Lukáš ; Řiháček, Jan (referee) ; Jopek, Miroslav (advisor)
The project elaborates the design of the new technology production of the developed shape of the component, which is part of the drum break. The material of the component is structural steel S355J2C. The annual series produced is 100,000 pieces. From the possible production variants, the production by progressive cutting was chosen as the most suitable. Based on a literature study of the issue, an optimal method of production was proposed. The coil blank is fed to the designed tool by an unwinding and straightening device. The tool is clamped in the selected press LDO 800 A/S with the nominal forming force 8 MN. According to the economic calculations, the selling price of one manufactured part was set at 195 Kč. Production becomes profitable after making 55 283 parts.
|
|
|
CNC Applications in Forming Processes
Pobořil, Martin ; Jopek, Miroslav (referee) ; Řiháček, Jan (advisor)
This thesis presents the study on CNC control and its usage in forming processes. It analyses the main elements which are essential for functionality of computed numerically controlled processes. It also comprises the basics of CNC programming and related software programmes. Individual technologies of forming are covered in terms of fundamental principles. Subsequently the technologies are described in relation to the CNC control – in theory and also the specific examples of machines and software programmes are given. The thesis considers advantages and disadvantages of each technology and its suitability for use in given application.
|
|
|
Production of gully
Švejda, Jakub ; Jopek, Miroslav (referee) ; Podaný, Kamil (advisor)
The project elaborated design of technology production of the gully – the rotational extract with flange from the deep drawing corrosion resistant sheet iron 1.4301. Pursuant to of the literary pursuit and calculation was designed drawing without thinning the wall in two operation and that in one instrument with two bottom holders enabling their combination into one stroke. The drawing instrument makes use of as standardised components as construction elements calculated using calculations and consist of three parts. The bottom and upper are magnetically clamped on the hydraulic drawing press Dieffenbacher PO 250, with nominal tensile force 2500 kN. Both drawing punches and drawing dies are produced from alloyed instrumental steel 19 436.9 heat-worked according to drawing documentation.
|
guest ::
RSS feed.