|
|
Steam turbine for municipal waste incinerator
Holík, Michal ; Fiedler, Jan (referee) ; Kracík, Petr (advisor)
The thesis focuses on the design of a condensing steam turbine for a waste incineration plant. The design includes the supply of heat to the district heating system with a temperature gradient of 55/75 °C and an output of 15 MWt in the summer period, and the supply of heat to the district heating system with a temperature gradient of 65/120 °C and an output of 45 MWt in the winter period. The first stage of the turbine is a controlled stage with impulse blading. This is followed by the stepped section, which consists of 7 cones with a total of 40 stages. These stages were subsequently strength-verified. A balancing piston, gland steam system, and bearings were designed. Finally, the operational characteristic of the turbine was constructed.
|
|
|
Splicing of special optical fibers
Hlavatý, Václav ; Holík, Milan (referee) ; Mikel, Břetislav (advisor)
The aim of thesis is to design welding processes for special optical fibers. The text describes procedures of modification of the basic welding process for three types of PM fibers. For each fiber type was created specific welding process. All optimized welding processes were tested in terms of reproducibility.
|
|
| |
|
|
Possibilities of using hydrogen in the energy sector
Holík, Michal ; Lisá, Hana (referee) ; Baláš, Marek (advisor)
This bachelor thesis describes hydrogen energy and gives the reader an introductory look into the world of hydrogen technologies. The first part describes the production of hydrogen from fossil and renewable sources. The second part deals with the possibilities of processing and use of hydrogen in energy. The third part represents the specific application of its use.
|
|
|
Hollow Core Photonic Crystal Fibers
Hlavatý, Václav ; Holík, Milan (referee) ; Mikel, Břetislav (advisor)
Aim of the work was to study, design and verify methods of splicing photonic crystal fibers with standard single-mode and multi-mode fibers. The main goal was to make of the fusion splicer Fujikura FSM 100P splicing process. To create splicing process, various splicing methods were tested. Method of the moving position of the arc discharge from the center of splicing fibers and the method with increased gas pressure in the microstructure were mainly tested. Research revealed the incompatibility of splicing process of the different types of fiber splicers. The main results of the work are optimized methods of the splicing HC 1550-2 fiber and SMF 28 fiber.
|
|
|
Analysis of GPON frames using machine learning
Tomašov, Adrián ; Horváth, Tomáš (referee) ; Holík, Martin (advisor)
Táto práca sa zameriava na analýzu vybraných častí GPON rámca pomocou algoritmov strojového učenia implementovaných pomocou knižnice TensorFlow. Vzhľadom na to, že GPON protokol je definovaný ako sada odporúčaní, implementácia naprieč spoločnosťami sa môže líšiť od navrhnutého protokolu. Preto analýza pomocou zásobníkového automatu nie je dostatočná. Hlavnou myšlienkou je vytvoriť systém modelov za použitia knižnice TensorFlow v Python3, ktoré sú schopné detekovať abnormality v komunikácií. Tieto modely používajú viaceré architektúry neuronových sietí (napr. LSTM, autoencoder) a zameriavajú sa na rôzne typy analýzy. Tento systém sa naučí na vzorovej vzorke dát a upozorní na nájdené odlišnosti v novozachytenej komunikácií. Výstupom systému odhad podobnosti aktuálnej komunikácie v porovnaní so vzorovou komunikáciou.
|
|
|
Design and implementation of xPON frame processing interface
Vais, Zdeněk ; Dejdar, Petr (referee) ; Holík, Martin (advisor)
This thesis focuses on system for persistence of GPON communication. Theoretical part deals with problems of GPON and NG-PON optical networks, NoSQL database systems and MongoDB database. Practical part contains design of a database schema for MongoDB database and source code in programming languages Python and C# for working with this database. The thesis is finalized by performance testing, proving that the database design and source code implementation is capable of handling real world traffic.
|
|
|
Apodized fiber Bragg grating analysis
Mišurec, Jan ; Holík, Milan (referee) ; Urban, František (advisor)
This work deals with the behavior of the apodized fiber Bragg gratings. The used individual apodized Bragg fiber gratings and mathematical functions for each apodized profiles are described. The work shows the selected apodization waveforms profiles and their step function approximations needed for further simulations.
|
|
| |
|
|
Laser diode soldering
Straka, Michal ; Holík, Milan (referee) ; Stejskal, Petr (advisor)
This work deals with the laser diode soldering. The theoretical part summarizes general and acquired findings about soldering technology and materials that occur in this process. It also describes factors that affect the reliability of solder joints. It is closely focused to the shaping of the solder joint and structure of intermetallic layer. The practical part of this work is focused on the design of equipment for laser diode soldering and subsequent shaping of the samples. The quality of soldered joint is compared against the quality of joint created using re-flow technology - remelting in in-line smelter. The structure and thickness of the intermetallic layer, the number and shape of the voids in the solder joints are compared.
|
guest ::
RSS feed.