|
|
Determination of content of organic compounds in biochar
Novotná, Martina ; Řezáčová, Veronika (referee) ; Mravcová, Ludmila (advisor)
Biochar is created during the pyrolysis of organic biomass. Once added into the soil, it can improve its features. Biochars made from sewage sludge have various compositions. It is because of the vast difference between entrance materials. Organic pollutants can be absorbed into its surface during the cooling proces sof pyrolysis. If released into the enviroment, these compounds can cause inhibition of plant growth, get into food chains and adversely affect living organisms. Organic pollutans are determined most often by GC/MS after organic solvent extraction.
|
|
|
Determination of nitrates in vegetables by capillary izotachophoresis
Jančová, Nikola ; Zlámalová Gargošová, Helena (referee) ; Řezáčová, Veronika (advisor)
This bachelor thesis deals with determination of nitrates in vegetables employing the capillary isotachophoresis technique. The literature review is devoted to occurrence of nitrates in vegetables, their health risks, the influence of food processing onto nitrate content, commonly used methods of determination as well as the capillary isotachophoresis and its practical application. Experimental part focuses on the application of capillary isotachophoresis for determination of nitrate content in vegetables obtained from conventional agriculture and organic farming.
|
|
|
Influence of biodegradable polymers microplastics on properties of soil organic matter
Denková, Pavla ; Řezáčová, Veronika (referee) ; Kučerík, Jiří (advisor)
The microplastics contamination is an issue observed in all environmental compartments. Currently, the trend is to replace the synthetic polymers by biodegradable ones, which are expected to degrade faster due to omnipresent microorganisms. However, this assumption may not correspond with the reality. In nature, biodegradation can last long or not whatsoever and the microparticles of biodegradable polymers can remain in soil the same way as particles of synthetic polymers. The effect of microparticles of biodegradable polymers on soil´s biota has already been studied, but the effect on the properties of soil and water in the soil has not been elucidated yet. This thesis deals with the influence of microparticles of biodegradable plastics on the physico-chemical properties of soil organic matter, especially on the behavior of water in the soil system under arid and semiarid conditions. Microparticles of poly(R-3-hydroxybutyrate), abbreviated as P3HB, were used as a model biodegradable polymer and were introduced into the soil in various concentrations. To determine the evaporation enthalpy of water and stability of water bridges that affect (stabilize) the physical and chemical structure of soil organic matter Differential Scanning Calorimetry (DSC) was used. Simultaneously was also measured their effect on water holding capacity of soil organic matter. Under experimental conditions, P3HB microplastics were found to reduce evaporation enthalpy, which facilitates drying of soil organic matter. Nevertheless, their effect on final water holding capacity was relatively low. Besides, we observed a negative effect on the stability of water molecule bridge that connect segments of soil´s organic components. Thus, P3HB microparticles in soil could pose a risk due to their influence on the water retention mechanism in soil under arid and semiarid conditions.
|
|
|
Use of biomarkers for assessing environmental pollution by platinum group metals
Nedvědická, Lucie ; Řezáčová, Veronika (referee) ; Komendová, Renata (advisor)
This diploma thesis in the theoretical part analyses the characteristic feature of individual platinum group elements, their toxicity, anthropogenic sources and the presence of platinum group elements in the environment of the Czech Republic. In addition, there are specified types of bioindicators focusing mainly on lichens, mosses and needles. There are described individual bioindication techniques and pre-treatment of samples for platinum metals determination in bioindicators. The subject of the experimental part is to verify the sorption efficiency and ability of platinum and palladium using the SPE method and to determine the actual platinum metal contamination in selected localities in the city of Brno. There was also the additionally subject to verify the sorption potential of selected bioindicators and determination of the environmental pollution by platinum metals using the bag technique. In the experimental part, the bioindicators of moss Pleurozium schreberi, lichen Xanthoria parietina, lichen Flavoparmelia caperata and needles Pinus nigra were used.
|
|
|
Hair as a bioindicator of contamination of risk metals
Zmijová, Marie ; Řezáčová, Veronika (referee) ; Zlámalová Gargošová, Helena (advisor)
The use of hair as a bioindicator of environmental contamination by risk elements is becoming more and more common. This bachelor thesis deals with the use of this matrix for analysis using the voltammetric method. It focuses on the optimization of the method for determining the concentration of cadmium, copper, lead and zinc in real hair samples and monitors the effects on the incorporation of these elements into the hair fiber. The presence of zinc and copper was confirmed in all samples analyzed. Cadmium could only be quantified in one sample. The effect of gender and age on the concentration of elements has not been demonstrated. Concentration of lead has been linked to smoking, with higher concentrations found in smoker’s hair than in non-smoker’s.
|
|
|
Study of the influence of nanoparticles on water properties
Šram, Matěj ; Komendová, Renata (referee) ; Řezáčová, Veronika (advisor)
This work deals with the study of the influence of platinum nanoparticles with a size of 3 nm on the properties of water in a porous system. SiO2 with a defined pore size was used as a porous system, which can simulate the mineral component of the soil. The theoretical part deals with the properties of free and porous water and the impact of nanoparticles on the environment. In the experimental part, the properties of free water, water in the porous system and the influence of the presence of platinum nanoparticles on these systems are investigated using differential scanning calorimetry (DSC). The observed processes were melting, solidification and evaporation, and derived quantities such as crystallization and melting point.
|
|
|
Analysis of substances released from composite dental material
Fučík, Jan ; Řezáčová, Veronika (referee) ; Mravcová, Ludmila (advisor)
This master's thesis deals with a present problem of alternative dental fillings, which should replace amalgam fillings. Although there are health concerns about these alternative materials, especially resin composite fillings raise concerns, because they release potentionally harmful substances into the oral cavity. Accordingly even this medical device subjects various tests before releasing to the commercial market and one of these tests was carried out according to ČSN EN ISO 10993 and available scientific literature in the experimental part of this thesis. The amalgam controversy, substances used for manufacturing of resin dental fillings and analytical methods are described in the theoretical part of the thesis. In the experimental part of the thesis, 30 days long cumulative extraction experiments were carried out into various extraction mediums in order to assess suitability of new dental resin filling from ADM, a.s. by comparison with commercially available dental material from company GC EUROPE N.V. These samples were analysed by LC-MS and the amount of eluted substances from dental composites to extraction medium was quantified.
|
|
|
Analysis of fluoroquinolone antibiotics in the soil
Vdolečková, Monika ; Řezáčová, Veronika (referee) ; Mravcová, Ludmila (advisor)
The thesis dealt with the global problem of the occurrence of pharmaceuticals in the environment, specifically fluoroquinol antibiotics (ciprofloxacin and enrofloxacin), which are among other critically important antibiotics. These drugs enter the soil environment through the application of already contaminated animal waste (e.g. manure) or through wastewater used in irrigation or through the application of treated sewage sludge, which may contain drug residues. Increasing concentrations of these antimicrobial drugs in the environment provide an environment for the emergence and spread of microbial resistance. The accumulation of these drugs then leads to the emergence of resistance to these antibiotics. The experimental part of the thesis focused on the optimization of a method for the extraction and subsequent determination of fluoroquinolones in soil and litter. For this purpose, parameters related to the extraction yield of fluoroquinolones from the soil matrix were optimized, such as sample weighting, selection of a suitable extraction medium, SPE performance, elution method from the SPE, etc. Extraction recoveries of 70 to 140 % were achieved as part of the optimization. Finally, the optimised method for extraction of fluoroquinolones from poultry litter and soil samples provided by the ÚKZÚZ was used. The experimental results confirm the long-term persistence of these drugs in the environment.
|
|
| |
|
|
Determination of hyaluronan by electromigration methods
Bártová, Adéla ; Mravcová, Ludmila (referee) ; Řezáčová, Veronika (advisor)
This thesis is focused on description hyaluronic acid, characterization of its behaviour in water solutions, its chemical-physical properties and its using in different industrial sectors. The next part deals with possibilities of its analysis. The following section of the thesis is focused on electromigration techniques with special attention dedicated to capillary electrophoretic methods, especially capillary zone electrophoresis. The aim of this thesis is optimization of the method of determination of hyaluronic acid in water solutions by capillary zone electrophoresis.
|
guest ::
RSS feed.