|
|
Three-phase sinusoidal pulse width modulation algorithms
Rudolf, Ladislav ; Červinka, Dalibor (referee) ; Klíma, Bohumil (advisor)
The main theme of this bachelors‘s thesis is to introduce readers into the algorithm of generating three-phase sinusoidal pulse width modulation. Main attention is concentrating to methods of generating Pulse width modulation method such as comparate PWM modulation technique and space modulation of voltage vector SVM. The functional units of algorithms are analysed and described from the basics. In addition, this project describes the basic analog solutions and even the implementation of the PWM modulator into signal processors DSP56F800.
|
|
|
Control of three-phase asynchronous motor
Nekvapil, Jan ; Huták, Petr (referee) ; Klíma, Bohumil (advisor)
This theses concern proposal and implementation asynchronous motor control algorithm in the processor DSP56F807 from the manufacturer Freescale. The complex design of applicable control algorithm and suitable interconnection with processor and outer component is solved in this work. Integral part is also choosing of suitable power elements of inverter and sensors.
|
|
|
Asynchronous dynamometer - power inverter
Vetiška, Vojtěch ; Červinka, Dalibor (referee) ; Klíma, Bohumil (advisor)
This project deals with the power converter for the asynchronous dynamometer. Inside of the document we shall acquaint with claims towards switching transistors and actuators. Furthermore we shall go through the principle and the wiring of three-phase converters and active rectifiers . We specify particular conditions of parameters for the power converter. For these conditions we shall dimension particular elements of the power converter. On the end we shall design the mechanical arrangement of the power circuit and create the design documentation..
|
|
|
The temperature measurement with semiconductor sensor
Dostálek, Martin ; Klíma, Bohumil (referee) ; Huták, Petr (advisor)
This bachelor work disserts on measurement of temperature using the electronic temperature sensors DS18B20, which are controlled by microcomputer type AVR. This sensors use for communication the 1-wire type data bus. The 1-wire data bus, designed by Dallas Semicondoctor, allows connect more devices to the control unit using two wires. This type of measuring elements offers simple handling for the user. The sensor transforms the measuring data directly to the digital data. The rate of the transmission is determined by number of bits in the resultant value and the sensor is programmable during attendance by the set mechanism (master). The sensor code is consistent with the value of measured temperature. That means it doesn’t require supplemental decoding. The resulting data are worked up and displayed on LCD continuously. First part of this work is focused on the theory of 1-wire element. Further, there is an explanation of the principle of the measuring sensor function and its controlling by the control unit. Next, there is a basic description of the AVR type microcomputers, more detailed description is aimed at the ATiny2313 controller, which is used in this work. The important part is dedicated to the implementation of the 1-wire protocol to the appropriate control unit.
|
|
|
Testing stand of synchronous machines
Král, Michal ; Pospišilík, Jiří (referee) ; Klíma, Bohumil (advisor)
This diploma thesis deals with a part of synchronous generator testing stand project. Thesis is focused on drive part of testing stand, the appropriate drive is chosen according to type of the tests. The attention is mainly on drive control, specifically on the configuration of frequency converter and software programming of the converter control in NI LabVIEW. Software also contains drive simulation program. Testing stands are sequentially installed and commissioned.
|
|
|
CONTROL SYSTEM DEDUSTING ARC MELTING FURNACES
Blažek, Ondřej ; Klíma, Bohumil (referee) ; Huták, Petr (advisor)
This master´s thesis deals with control and process visualization system dedusting arc melting furnaces, the subject of this master´s thesis is electrical part of the ventilation system from the control system via industrial communication to the design of power components, which include the main fan motor powering inverter. Another part is paid to the design and description of the proceedings, a concept of the control program, design visualization, implementation, remote access and archiving of process values. The last part contains evaluation of the project in terms of the preparatory phase and in terms of commissioning, in particular the description of the additional work that had to be compared to the proposal for commissioning performed.
|
|
|
Drive design for Foil Winding Machine
Koncer, Adam ; Červinka, Dalibor (referee) ; Klíma, Bohumil (advisor)
Master’s thesis deals with the realization of motion drives for the foil winding machine. Drives for this machine are supplied by company Siemens. Whole project is made in cooperation with that company. The reader gets a comprehensive overview of the product group SINAMICS that will be used for the realization of drives in this machine. Thesis describes the selection of individual drive components, their control and regulation. Measurement and evaluation of results foil winding machine is made in the last chapter of this thesis.
|
|
|
Control of Three-phase Sinusoidal Power Source
Žůrek, Tomáš ; Patočka, Miroslav (referee) ; Klíma, Bohumil (advisor)
This thesis deals with control of three phase inverter as three phase sinusoidal voltage source for UPS application. Thesis is split to two parts, teoretical and practical. Teoretical part deals with three phase inverter topology analysis according requirement of neutral line wire and possibilities of generating sinusoidal PWM in depend of topology. There are also analysed properties of contorled system and designed 3 regulation methods with simulations. Second part of thesis deals with realisation of sinusoidal power source with inverter borrowed by Elcom company. To inverter control is used digital signal controler TMS320F28335 with implemented control algorithms. There are also presented the measurement results of the prototype of power source. In conclusion, simulation results are compared with measurements and achieved results are summarized.
|
|
|
Design of the electric locomotive drive
Dočekal, Martin ; Klíma, Bohumil (referee) ; Patočka, Miroslav (advisor)
The focus of the work is the calculation and design of battery-powered drive of locomotive, operating in the sub-siding mode, ie when the locomotive is moving on the track section without the overhead line. The proposed battery groups to ensure the drive train will be installed directly into the locomotive engine room. In the theoretical part of the work there has been done the analysis of the electrical locomotives and electrical unit, which nowadays are used in the Czech Republic in driving of voltage controller with the integrated circuit. Then, in the chapter there is a brief description modern locomotives frequency convertor’s and rectifier’s function. The practical part of the work contains the necessary force and energy calculation for train moving on the determined rails. On the base of the received data, the design of battery groups has been done. These battery groups will work as an independent traction which insures the moving of the train on the determined rails. In the work the design, which consists of STEP-UP and STEP-DOWN convertors, has also been done. The power model and model management were created in Matlab Simulink programme. Data and graphs exported from the Matlab Simulink programm are determined for verifying convertor’s function, which can be found in a separate chapter. In addition to the proposal of the battery drive is at work also has been calculated loss of traction rectifier during normal operation of the locomotive, ie outside siding mode. For this calculation, in the conclusion is listed the theory of calculation of the losses incipient in the transistor and freewheeling diode of rectifier. According to the theory own calculation is performed. Subsequently the liquid cooler calculation of the rectifier is calculated.
|
|
|
DC/DC step-up converter for notebook
Škunda, Michal ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
Given bachelor’s thesis devoted to a proposal and implementation of transducer STEP-UP for supplying of notebook in car. Introduction presents dividing of switching power supplies followed by a choice and a proposal of power supply. In this work we can find the specific proposal of inductor, the proposal of electronic connexion and the proposal of PCB layout. There is a software EAGLE used for the design of PCB layout. In the last part of work there are particular courses of current and voltage that characterize power supply pictured. The work contains measured load characteristic of switching power supply loaded by notebook as well. Notebooks need to have quality power supplies that is why there was a special attention paid to the quality of supply and its electric parameters.
|
guest ::
RSS feed.