|
|
Chalet under Poľana
Babicová, Ivana ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The aim of my diploma thesis is to design the object of a chalet, which is intended for recreation, boarding and accommodation. The accommodation is designed for 16 people in the form of tourist accommodation. The land, on which the proposed building is located, is on a slight slope, in an uninterrupted area in the protected landscape area of Poľana. Access to the land is secured by asphalt road from the northeast side of the land. It is also accessible by a tourist route from the southeastern side. The affected area is located approximately 10 km from the nearest village Hriňová. In the past, the site was often used for recreation. At a distance of 1 kilometer is the old mountain hotel Poľana, which is out of operation, but provides only temporary accommodation. The new chalet should return tourism to this area and increase the interest of tourists. The underground floor has a separate service for servicing and borrowing sports equipment. The building has one underground floor partially embedded in the terrain, from the south side accessible for the public. Two above-ground floors are made up of CLT panels, the first serving for a restaurant and a private dwelling unit, the second one for accommodation. The underground floor is designed with concrete filling blocks. The roof is a saddle, made of wooden collar construction. On the south side of the building is a large dormer.
|
|
|
Fire station
Wrana, Lukáš ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The subject of this thesis is to create a project documentation of the design of new construction of fire station in Šumperk. The fire station is designed according to ČSN 73 5710 as a C type station that will be used by professional fire brigade of Olomouc district. The object is structurally divided into two parts - a masonry building, and a reinforced concrete frame. The administrative part of the building together with the base of the fire brigade, technical room, and a fire tower are designed as a masonry building made of Ytong cellular concrete units. One of the parts is designed as a two-level object, while the technical room and the fire tower are designed as a sigle-level object. The circumferential masonry is insulated by contact thermal insulation system. The floor construction is made of Spiroll prestressed floor slabs. The roof is designed as a warm flat roof. The garage is a single-level building with built-in structure of storerooms in part of the garage. The precast reinforced concrete frame is set on foundation pads and foundation sills. The horizontal and vertical supporting structure consists of reinforced concrete parts – columns, Spiroll floor slabs, floor girders, sway frames, purlins and small purlins. The whole object is covered by a warm flat roof. The external cladding consists of PUR isolating sanwich panels.
|
|
|
New detached house wit hair studio
Chadima, Tomáš ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The subject of the thesis is a design of a two storey family house without basement with a hairdresser´s salon. The building is situated in the middle of the Poříčí u Litomyšle, c.a. Poříčí u Litomyšle. The living area of the house dedicated for permanent living is suitable for 6 people. The hairdresser´s salon is designed for one person. The entrance to the building has wheelchair access. There are 2 parking spots, one is designated for people with reduced mobility and orientation. The building is based on strip foundations which are placed in a frost line. The bricked construction system is made of polished ceramic blocks Heluz. The house is insulated by a contact system from EPS. Internal partition walls and the ceiling structure are also made of the system Heluz. Roofing of the building above the 1st over ground floor is solved by a single-layer green flat roof. The gabled roof above the 2nd over ground floor is made of trussed girder. The design of the house includes a garage designated for two cars. The thesis includes seminar work which evaluates constructions from the point of view of thermal technology and acoustics.
|
|
|
Mixed-use building in Bruntál
Ondrušková, Veronika ; Šteffek, Libor (referee) ; Brzoň, Roman (advisor)
This diploma thesis deals with design documentation of New mixed-use building in Bruntál. The building is located in the centre of the Bruntál on the plot number 83/1. Regulatory plan defines this plot for construction. It is marked as SC – mixed-use residental plot. The building contains the main conditions of use – living, shopping, restaurant and administration. The building has 3 above-ground floors and 1 basement. At ground floor there is café and shop. At first floor there are offices and conference room. At second floor there are flats. In basement there is utility room, cellars, garage and storages. The café and shop is separated and has its own entrances. Horizontal and vertical load-bearing and non-load bearing structures are bulit of permanent formwork VELOX – perimeter load-bearing walls are sandwiches, internal load-bearing walls are of cast-in-place reinforced concrete, which is covered by permanent formwork. Non-load bearing walls are bulit of 2 boards of permanent formwork with inserted acoustic insulation. Vertical load-bearing structures are made of cast-in-place reinforced concrete, which is covered by permanent formwork. The building has concrete foundation strips and cast-in-place reinforced concrete stairs. The roof has got classical order of layers.
|
|
|
Relaxation - recreation Hotel Dubník
Geschwandtner, Matúš ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The diploma thesis deals with project design documentation of a Relaxation – recreation hotel Dubník in Stará Turá. The object is designed as a two floor building with basement below ground level. Object´s ground plan is rectangular shaped. First floor contains a lobby, restaurant, a kitchen, and a hotel administration part. Second floor is meant for accomodiaton. Sauna and ice pool is designed in basement. Construction system is combinated. Coping consists of a double sloping roof made out of wooden roof trusses.
|
|
|
Multifunctional house Lignum
Jakubčánin, Marek ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The diploma thesis focuses on a mixed-use building with a rectangle-shaped ground plan in Žilina city. The object is four-storey and with no basement. It is split into two sections. The first one provides a space for three operations in northeastern part of the first floor with an attached parking lot. These operations are not further described in this project and depending on investor´s requirements some changes may apply. The second part is an apartment housing section. The first floor contains utility rooms such as storage and buggy room. The housing sections are accessible with two entrances. The apartments are located from the second up to the fourth storey and are designed 1+KK, 2+KK,3+KK and 4+KK respectively. The apartments are assigned with parking spaces isolated from operations parking lot. Vertical bearing walls are made of clay blocks POROTHERM 30 AKU P+D, which are used also as internal bearing party. Internal bearing walls placed in apartments are made POROTHERM 25 AKU P+D and completed by POROTHERM 14 PROFI P+D. Walls will be placed on conrete and reinforced concrete strip foundation. Building has external thermal insulation made by EPS gray 200mm thick. Horizontal load-bearing structures are made by reinforced concrete. Object has flat roof with minimum slope 3%. Damp proof is made by PVC-P membrane. As thermal insulation is used mineral wool.
|
|
|
Touristic cottage Gruň
Kozel, Tomáš ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The aim of the diploma thesis was to design a tourist chalet in Beskydy mountain. The building is solved as a masonry building. Tourist chalet has gabled roof with dormer on south and north side. When designing the object the accent of its funcionality was emhasized and the proposition of the energetically economic object. I designed by heat pump, the boiler and storage on pellets,
|
|
|
Office building Brno-Bystrc
Dokulil, Martin ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The master´s thesis deals with a project documentation of a office building with fitness center in Brno-Bystrc. The object is designed as a detached building with four floors and with one basement. Floor plan of the building is regular, staffed by sloping terrain. In basement is situated underground garage and technical rooms of building. In the first floor is fitness center and garage for a customers. In other floors are office spaces for private company. Above the roof is a engine rooms of ventilation. The structural system is reinforced concrete skeleton, facade is designed as a curtain walling. The object is covered with a flat roof.
|
|
|
Study of energy consumption reduction of block of flats
Svoboda, Lukáš ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The goal of the thesis is firstly to get all the information about the initial state of solved block of flats, which is located on the street Merhautova 76/954 in Brno – Černá pole, in terms of constructions, energy consumption and initial state of heating system. In the second part of the thesis, where are discussed the possibilities of reduction of energy consumption, variant drafts of reduction of energy consumption and their financial costs and the choice of optimal variant. Third part deals with assement of solved block of flats in terms of sustainable built environment by using tool to rate buildings in terms of sustainable built environment - SBToolCZ, evaluation of possibility to use renewables. In the end are written summaries and recommendations.
|
|
|
Sports hall with facilities and restaurants, Valašské Klobouky
Naiser, Jaromír ; Šteffek, Libor (referee) ; Kacálek, Petr (advisor)
This thesis covers brand new detached sports hall with facilities and restaurants in Walnut Klobouky. Sports hall has a floor partly sunk below the surface, contains grandstand for 340 spectators. The second part, ie background sports hall is in the basement, the ground floor is a restaurant kitchen. The building is designed in plan shape of two rectangles. The roof is gabled and desk. Cladding the halls are ventilated, part of the facilities and restaurants are contact-insulated. Staff restaurant facilities are located in the floor, engine room ventilation are 3, in the hall, first underground floor and first floor. The heat exchanger is designed, which is applied hot water. The finish consists of ceramic tiles in the lobby is used double wood board flooring. The supporting structure consists of prefabricated unit first underground floor SPIROLL.
|
guest ::
