|
|
Self propelling articulated boom
Horváth, Tomáš ; Pokorný, Prokop (referee) ; Škopán, Miroslav (advisor)
This bachelor thesis contains the division of working platforms, analysis of structural elements of articulated work platforms, critical research of current design solutions of these platforms, design of a working basket with a load capacity of 350 kg, functional and strength calculations of load bearing structure, design of a linear hydraulic motor and drawing documentation.
|
|
|
Design of the container manipulator laboratory model
Sekava, Jan ; Kašpárek, Jaroslav (referee) ; Pokorný, Prokop (advisor)
The aim of the Bachelor thesis is to design a laboratory model of the container manipulator. The work is divided into a theoretical and practical part. In the theoretical part is a search of industrial solutions. The practical part deals with design of the container manipulator. The proposal is accompanied by an economic analysis and a selected drawing documentation. The result is a functional model of laboratory container manipulator.
|
|
|
Handling equipment for the containers
Buš, Martin ; Jonák, Martin (referee) ; Pokorný, Prokop (advisor)
This bachelor thesis deals with research of used handling equipment and auxiliary handling equipment for containers. In the introduction of the bachelor thesis there are brief information about combined transport and used containers. The following is an overview of handling equipment and auxiliary handling equipment for handling containers.
|
|
|
Modification of the overhead crane laboratory model
Begáň, Matej ; Kašpárek, Jaroslav (referee) ; Pokorný, Prokop (advisor)
The aim of my bachelor thesis is to design the laboratory model of the bridge crane trolley. Which means the thesis has to be done in several parts and is therefore divided into a written and practical section. First part deals and survey industrial solution. Next parts, these are already part of the practical section, are focused on the design of the laboratory model of the bridge crane trolley, the economic analysis of my proposal and the whole thesis is completed by set on selected drawings of components.
|
|
| |
|
|
Hydraulically driven screens
Peška, Dalibor ; Pokorný, Prokop (referee) ; Škopán, Miroslav (advisor)
The goal of this bachelor thesis is to elaborate a conceptional design of hydraulically-driven screens located at the entrance to the small hydroelectric power station. In this thesis, there is a research of similar devices as well as the calculation of the mechanism. There is a drawing documentation of the selected parts enclosed to this thesis.
|
|
|
Lifting equipment for a tractor
Zálešák, Jiří ; Pokorný, Prokop (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with the design of the device carried by a tractor which will be used for material handling. Aggregation is solved using the three - point hitch of the tractor. The load carrying capacity is 1000 kg. The thesis contains a 3D design, a constructional solution, which is based on strength and control calculations, and technical drawings.
|
|
|
Travelling crab
Dvorník, Milan ; Pokorný, Prokop (referee) ; Malášek, Jiří (advisor)
The bachelor thesis is concerned with design of drive mechanism for bridge travelling crab with demanded load 20 000kg and travelling speed 0,6m.s-1. The objective of work is design a solution concept of the drive mechanism and subsequent performance technical calculations focused on a running wheels, drive (electric motor, brake and gear-box), drive shaft and chosen parts (couplings and bearings). Part of this thesis is also the drawing documentation.
|
|
|
Laboratory verification of pendulum dynamics
Pokorný, Prokop ; Škopán, Miroslav (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor's thesis deals with the description and laboratory measurements of the pendulum dynamics. It also deals with the method of measurement using accelerometers and gyroscopes MEMS integrated in capacitive sensor and briefly describes the principle of their operation and use in practice. Measurements performed on a model of bridge crane with suppression of some degrees of freedom.
|
|
|
Bucket hoist for food grain transport
Šustek, David ; Pokorný, Prokop (referee) ; Škopán, Miroslav (advisor)
The aim of this thesis is a construction solution of a bucket elevator for transportation of grain with specifiedtransport quantity and specified transport height. In the first part of the thesis, a brief overview of individual parts of the bucket elevator and their influence on the function of the devicewas performed. The conveyor parameters are then determined based on the overview. The second part of this work focuses on the theoretical calculations. Using these calculations, the individual components of the bucket elevator are selected or designed. This part includes a control of the safety of the drive shaft, together with the subsequent calculation of the bearing durability. This thesis further comprisesa relevant drawing documentation of the whole bucket elevator assembly and the subassembly of the driving station.
|
guest ::
RSS feed.