|
Holographic interferometry as a tool for visualization of temperature fields in fluids
Dančová, Petra ; Vít, Tomáš ; Lédl, V. ; Trávníček, Zdeněk ; Doleček, R.
Measurement of temperature field in moving fluids is connected with many difficulties. Usage of point temperature measurement methods, such as Constant Current Anemometry (CCA), is limited to frequencies up to 3kHz. This frequency should be the limiting factor for using the CCA in fluid when fast change of temperature occurs. This shortcoming of CCA measurements should be overcome by using of optical methods such as digital holographic interferometry. It is necessary to employ a special holographic setup with double sensitivity instead of the commonly used Mach-Zehnder type of holographic interferometer in order to attain the parameters sufficient for the studied case. This setup is not light efficient like the Mach-Zehnder type but has double sensitivity. The special technique of acquiring and phase averaging of results from holographic interferometry is presented.
|
| |
|
Vizualizace obtékání rotujícího válce
Broučková, Z. ; Trávníček, Zdeněk ; Šafařík, P.
Byla provedena vizualizace obtékání stojícího i rotujícího válce ve vzduchu. Vizualizace byla provedena pro dvě rychlosti nabíhajícího proudu pro Reynoldsova čísla Re = 920 a 990 a pro čtvery otáčky válce (0 s -1, 5 s -1 , 12,5 s -1 a 20 s -1). Získané výsledky byly porovnány s teoretickým modelem - potenciálním prouděním. Rychlost nabíhajícího proudu byla vyhodnocena na základě měření frekvence odplouvajících vírů za stojícím válcem v režimu Kármánovy vírové řady při Re = 110 a 120 s využitím známých závislostí mezi Strouhalovým a Reynoldsovým číslem.
|
| |
|
Annular Jets and Annular Impinging Jets
Turek, Tomáš ; Trávníček, Zdeněk ; Šafařík, Pavel ; Tesař, Václav
A near field of annular jets and annular impinging jets is experimentally investigated at three inner/outer diameter ratios 0.84, 0.90 and 0.95. Time-mean velocity profiles are evaluated, and three main flow field zones are distinguished – in agreement with the literature, namely the initial merging zone, the intermediate one, and the fully merged one. A distribution of the pressure on the impingement wall is measured for various nozzle-to-wall distances. Two basic annular impinging jet regimes are clearly distinguished, with either small or large recirculation bubbles. Moreover, a hysteretic behavior has been identified under specific parameters.
|
| |
|
Oblast parametrů syntetizovaných proudů
Broučková, Z. ; Šafařík, P. ; Trávníček, Zdeněk
Práce uvádí prehled parametru, které jsou potrebné pro popis syntetizovanýchproudu. Jsou diskutovány prípady vybrané z dostupné literatury. Rovnež je overenaspolehlivost nekolika známých kritérií existence techto proudu. Vetšina kritérií má obdobnýcharakter a dává spolehlivé výsledky – všechny vybrané prípady je splnují. Jedno zposuzovaných kriterií bylo vyhodnoceno jako málo duveryhodné.Dále bylo provedeno merení rychlosti proudení osove symetrického syntetizovaného prouduPitotovou sondou a anemometrem se žhaveným drátkem. Výsledky merení velmi dobrevyhovují poznatkum z literatury. Navíc se ukázalo, jak snižování Reynoldsova císla apribližování pracovního bodu ke kritické hodnote na hranici oblasti existence vede kpostupnému zkracování dosahu proudu.
|
| |
|
Visualization of synthetic jets at higher stokes numbers
Broučková, Zuzana ; Trávníček, Zdeněk ; Šafařík, Pavel
Visualization of synthetic jets at higher Stokes numbers (S = 90 and 127) by the phase-locked smoke-wire technique is presented and discussed. The working fluid is air. The Reynolds numbers are quantified using hot-wire anemometry. Although our method of visualization essentially provides only qualitative results, the present study also demonstrates some quantitative results, namely the behavior of the zero-net-mass-flux jet near its critical stage. Visualization of the sub-critical stage is also shown.
|
|
Experimental investigation of a control synthetic jet
Němcová, L. ; Kordík, Jozef ; Trávníček, Zdeněk ; Kopecký, V.
Synthetic jets were used in previous studies to control a continuous round air jet. This study focuses on the single synthetic jet, which is measured using Constant Temperature Anemometry (CTA) and Particle Image Velocimetry (PIV). Velocity profiles and frequency characteristics of the single synthetic jet are discussed and the velocity maps at frequencies of 30 Hz, 81 Hz and 190 Hz are presented. Finally, velocity, flow rate and momentum coefficients featured the present flow control are evaluated, and examples of actively controlled round air jet are put on. The results confirm efficiency of the present flow control method.
|