|
|
The apartment house in Horní Loučky
Šmídková, Michaela ; Krupica, Roman (referee) ; Krupicová, Jana (advisor)
The topic of the thesis is the design of new residential building in Horni Loucky. The aim is to develop detailed documentation for construction. The work includes studies, drawings, text and part of the calculation. It is a detached residential building with ground plan dimensions of approximately 13.5 x 16,75 m. The building has 4 floors and a flat roof. The building is made of sand-lime bricks, ceilings are monolithic reinforced concrete. Roofing is made up of single shell flat roof. The building is located on undeveloped land in housing estates on flat terrain. Residential building contains 5 apartments, one of which is completely wheelchair and one workshop (eg hairdressing). At the building will be constructed parking area for the residents of the apartment building and premises.
|
|
|
The health center
Pyszková, Dorota ; Krupica, Roman (referee) ; Krupicová, Jana (advisor)
The Diploma Thesis deals with project documentation of a newly built health centre with regard to the requirements of thermal technology, fire safety and acoustics. It is a brick, detached, flat roof and three storey building. The construction is built on the foundation stripes. A seminar work is a part of the thesis. It includes all requirements that have to be complied during designing the health center. Next parts of the project focus on different specialisations processed at Institute of Concrete and Masonry Structures and at Institute of Building Services.
|
|
|
The family house in Kojčice
Brabec, Josef ; Krupica, Roman (referee) ; Šuhajdová, Eva (advisor)
The aim of this bachelor thesis is a project of new building of a family house in the cadastral area of Kojčice. The family house is sitting on the suburb of the village. The house is two-floor building. The family house is designed for a family of 4 members.. The building is covered with a tent roof type. As the main wall structural system we have used KM BETA SENDWUX systém. The facade is designed as a combination of direct external insulation and ventilated facade. Documentation is prepared for the building construction. The graphical part of documentation has been processed in the AUTOCAD software.
|
|
|
The indoor environment of Kindergartens in terms of Building physics requirements
Jechová, Marie ; Krupica, Roman (referee) ; Bantová, Sylva (advisor)
The thesis titled "The indoor Environment of Kindergartens in Terms of Building Physics Requirements" addresses the challenges associated with ensuring thermal comfort in the indoor environment, while simultaneously providing adequate lighting and daylighting for the classrooms of kindergartens. The thesis is structured into interconnected and complementary sections. The first section dissects the identified problem, establishes legislative requirements, outlines research methods, and defines the objectives, which will be assessed in the conclusion. This section also includes the definition of the kindergarten object in accordance with current legislation. Furthermore, the issues of lighting and daylighting are explained from the perspective of applicable laws, regulations, and standards, incorporating all necessary variables, graphs, formulas, calculations, and definitions. Similarly, subsequent chapters will elaborate on the thermal comfort of the indoor environment. The final section of the theory provides an overview of simulation and computational software tools, employed to model different scenarios, compare the current and proposed conditions, and draw conclusions for the thesis. The practical section follows, focusing on the design of window openings, shading methods, and ventilation regimes to meet the requirements for daily lighting and daylighting while adhering to the maximum indoor air temperature in line with normative requirements. Experimental measurements of essential input data for assessing the thermal stability of the indoor environment were conducted during summer months in the existing facility. In the concluding part of the thesis, conclusions will be drawn regarding the ratio of floor area of transparent parts of building envelopes to the floor area of the classrooms. This is done to ensure compliance with legislative requirements concerning both thermal and lighting comfort in the indoor environment. The conclusion also summarizes potential measures to achieve the desired parameters and outlines a prospective solution to the addressed issues.
|
|
|
Mixed-use building
Slezáková, Tereza ; Krupica, Roman (referee) ; Jelínek, Petr (advisor)
This diploma thesis depicts project documentation for realization of a mixed-use building in Hradec Králové. The designed object includes fifteen flats in four storeys, a café, a hairdressing salon and no cellar. Vertical load-bearing walls of the first storey are designed to be built of reinforced concrete. Vertical load-bearing walls of the other storeys are designed to be built of ceramic blocks. The outside wall is insulated with expanded facade polystyrene and plastered with a thin-layer textured cream plaster. The last storey has a ventilated facade made of fibre reinforced concrete panels. The openings are filled with plastic windows including an aluminium entrance door with a fanlight. Horizontal constructions are made of monolithic reinforced concrete panels which are reinforced in one dimension. The roofing in designed as a flat roof with a layer of vegetation. The foundations of the multifunctional house are based on concrete piles and a reinforced concrete slab. The design of the object respects current housing in the area. The diploma thesis includes a basic review of construction physics and fire safety layout.
|
|
|
The family house in Chudenice
Korbel, Tomáš ; Krupica, Roman (referee) ; Šuhajdová, Eva (advisor)
The batchelor thesis Family house in Chudenice is procesed as a project documentation, including all requisites acording to valid legislativ. The designed house is placed at parcel number 1278/5 – cadastral area Chudenice. It is two floors newly built family house without basement. The house has a shed roof and it´s made of comprehensive building system of large format components made of cross-laminated solid wood (CLT – cross-laminated timber)
|
|
|
Preparation and analysis of experimental refractory alloy
Krupica, Roman ; Štěpánek, Roman (referee) ; Jan, Vít (advisor)
This thesis is focused on a preparation and especially on an analysis of an experimental Fe, Cr, W, Ni, Al, Ti refractory alloy. The first, theoretical, part of the work deals with refractory materials problematics in general. The second part of the work, experimental, is focused on the process of material preparation and its partial analyses in terms of hardness, but mainly in terms of structure. Light microscopy and scanning electron microscopy were used for these analyses, and energy dispersive spectrometry was used to analyze the chemical composition. The achieved results in all material states indicate that titanium nitrides randomly occur in the structure due to the nitrogen contamination. In the cast state, the material appears to be almost completely homogeneous without any significant casting defects. At grain boundaries, there is a uniform structured Laves phase population based on tungsten. After annealing at 800 °C/1h small fine and evenly distributed precipitates of the Laves phase occur together with even smaller precipitates of an intermetallic phase probably based on nickel and aluminum. Also, the amount of tungsten in the Laves phase at the grain boundaries was increased. During annealing at 1000 °C/5h, the precipitation particles of the Laves phase significantly coarsened and the occurrence of the intermetallic precipitates became uneven. At the same time, the Laves phase at the grain boundaries was again found to have more tungsten in it.
|
|
|
Extension and modernization of social services facilities Nitrava
Mitura, Daniel ; Krupica, Roman (referee) ; Hradil, Dušan (advisor)
The subject of this diploma thesis is the assessment of the existing facility of social services and the proposal for the modernization of the complex of objects in the facility. To date, the objects are fully utilized. Existing buildings Panel apartment building "A", Panel apartment building "B" and Connecting corridor "D". The existing construction object "C" will be demolished in its entirety. The diploma thesis focuses on the new construction object Extension, which has the task of replacing object "C" and modernizing the social services facility so that it meets the standard conditions. The proposed building is located on land that is accessible from Železničiarska street on the outskirts of Nitra. The extension is located on the north side of the land. The main entrance to the building is solved by crossing the Connecting Corridor. The building has two underground and four above-ground floors. On the 1st floor, there are pharmacy premises, a kitchen with a buffet and facilities, toilets and connecting corridors. In the northwest corner there is a warehouse for landscaping the green areas of the property. In the 1st floor there is a boiler room, a cleaning room and collective garage spaces, which also go into the 2nd floor. The dining room, toilets and chapel are located on the 2nd floor. On the 3rd floor, the premises of the dialysis clinic, workshops and rest rooms serving as clubhouses are accessible from the connecting corridor. On the 4th floor there is an exit to the flat green roof. All floors are connected vertically by two interior staircases and elevators. The supporting system of the substructure is designed from monolithic waterproof reinforced concrete. The structure of the upper structure mainly consists of prefabricated reinforced concrete columns and beams. The rigidity of the upper structure is solved by two stiffening monolithic reinforced concrete cores, in which vertical communications are placed. The supporting elements of the ceilings are designed from prestressed ceiling panels and monolithic reinforced concrete slabs. The building is covered with a green single-layer flat roof. The insulation of the perimeter structures is designed with the ETICS contact insulation system made of mineral wool. The foundation structures are designed as monolithic grids.
|
|
|
Guest house with restaurant
Saj, Marek ; Krupica, Roman (referee) ; Müller, Jan (advisor)
Goal of this diploma thesis is processing of the design project documentation of guest house with restaurant. Designed building is placed at flat terrain at plot of number 2016 in municipality Hradec nad Moravicí, cadastral area of Hradec nad Moravicí [646814]. Guest house with restaurant has approximately shape of two rectangles, that together looks like capital letter t. Building has overall dimensions in length 36 m and in width 22,54 m. Detached building is building without cellar, when the part of restaurant is single-storeyed with mono-pitched roof and there is placed the restaurant, kitchen, facilities guests, staff facilities and technical facilities. The part of quest house with mono-pitched roof is two-storeyed and there is placed quests rooms and facilities. Vertical and support construction comprises the permanent formwork Velox system, floor structure is reinforced concrete slab.
|
|
|
The apartment house in Uherské Hradiště
Kročová, Romana ; Krupica, Roman (referee) ; Krupicová, Jana (advisor)
The topic of the thesis is the design of new residential building in Uherské Hradiště. The aim is to develop detailed documentation for construction. The work includes studies, drawings, text and part of the calculation. It is a detached residential building with ground plan dimensions of approximately 16,5 x 26,5m. The building has 4 floors and a flat roof. The building is made of ceramic bricks, ceilings are monolithic reinforced concrete. Roofing is made up of single shell flat roof. The building is located on undeveloped land in housing estates on flat terrain. Residential building contains 16 apartments. Part of the 1st floor is also 6 separate garage.
|
guest ::
RSS feed.