|
|
Static solution of parking house
Rose, Dominik ; Koláček, Jan (referee) ; Zich, Miloš (advisor)
The bachelor's thesis is focused on the elaboration of a static solution of a parking house with four above-ground floors. Three variants are elaborated, one of which was elaborated in more detail. The proposed elements are the ceiling slab, the columns and staircase. The SCIA Engineer 20.0 program is used to calculate the internal forces. As part of the work, drawing documentation is also prepared. The structure is designed according to correctly valid standards.
|
|
|
Slab bridge in Budišov nad Budišovkou
Ilčík, Jakub ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
Subject of this bachelor´s thesis is design of new slab bridge construction in Budišov nad Budišovkou according to EN 1992-1-1. The bridge carries traffic across river Budišovka. It is full trapezoidal at cross-section area. Statically the construction is designed as point-supported slab with span lenght 12,0m. Cathegory of communication is S7,5. Internal forces are calculated by SCIA Engineer 15.3. Load of effects calculation and assesment of ultimate limit state and serviceability limit state is done according to valid standarts. Comparison of design with reinforcement in pressure zone.
|
|
|
Pedestrian bridge over the Jihlava river in Třebíč
Vavřička, Lukáš ; Velešík, Marek (referee) ; Koláček, Jan (advisor)
The bachelor thesis deals with design of concrete pedestrian bridge over the Jihlava river. At the beginning two variants were created, one of which was future postprocessed. The cable-stayed construction, whose main support part is created by two pylons fixed to post-tensioned bridge deck, is pin-supported on abutment. Suspension of the deck is implemented by cables pin joined to the top of towers and sides of the deck. Material of the main concrete load-bearing structure is concrete C45/55. The steel elements of structure are made from steel S355, suspenders are designed with steel Macalloy 460. The structural assessment report was processed mostly by hand calculation with use of program MS Excel, for structural check of pylon use of program FIN EC beton was chosen. The load calculation was performed with program Scia Engineer. The drawing was created in AutoCAD software and the visualization in Lumion.
|
|
|
Design of reinforced concrete slab in the store
Skoupá, Karolina ; Strnad, Jiří (referee) ; Koláček, Jan (advisor)
Bachelor thesis deals with the design and assessment of reinforced concrete slabs in store. The aim of this study was to develop and evaluate locally supported floor slab at the ultimate limit state and serviceability. The work includes structural analysis, design shape reinforcement drawing, data from computational substrate.
|
|
|
Prestressed slab bridge over the Krupá river
Nečasová, Pavla ; Nečas, Radim (referee) ; Koláček, Jan (advisor)
Bachelor thesis deals with the design and assessment of the main structure of the bridge in the village Staré Město. It leads a local road 44646 over the river Krupá. The thesis contains three designs of the construction. One design was choosen for detail solution (prestressed slab bridge). The thesis includes statical analysis, drawing documentation and visualization.
|
|
|
Pedestrian bridge across the river Jihlava
Ondřej, Václav ; Koláček, Jan (referee) ; Nečas, Radim (advisor)
The aim of this bachelor thesis is design of pedestian bridge across the river Jihlava. Out of three proposed variants was chosen frame construction. Calculation of load cases was made in software AxisVM and MS Excel. The construction was designed and assessed to the ultimate limit state and the serviceability limit state. The calculation was made according to valid standards.
|
|
|
Pedestrian bridge across the river Svratka
Hlava, Martin ; Koláček, Jan (referee) ; Nečas, Radim (advisor)
The subject of the bachelor thesis is about a concept of pedestrian bridge across the river Svratka. The work includes a statical calculation of the pedestrian bridge construction of one ground, which has been chosen from three other options. This chosen alternative is formed by a prestressed concrete´s plank with parapet´s supports of a variable cut earned by outer switchable cables. The calculation of the stress influence has been made by Scia Engineer Software. The construction recognition has been accomplished manually. A process of construction´s works are not going to be treated in this work.
|
|
|
D3 motorway bridge at km 33,588 in Slovakia
Lipovský, Václav ; Řeřucha, Kamil (referee) ; Koláček, Jan (advisor)
The diploma thesis deals with the design of a motorway bridge carrying the D3 motorway over a deep valley between Svrčinovec and Skalité. Three variants were developed for this work, from which the variant of a prestressed box girder bridge with sloping walls was selected for a detailed solution. The main superstructure was designed as a continuous structure with five spans of post-tensioned concrete. The superstructure is concreted in phases by means of an movable scaffolding system. The total length of the supporting structure is 255.50 m. The bridge is straight in plan. The analysis of the structure was carried out by means of several models that were created in Scia Engineer 21.1. The assessments of ultimate limit state and serviceability limit state were made according to valid standarts. The analysis of the structure was carried out in longitudinal and transverse directions. This thesis also includes a time dependent analysis (TDA) that takes the construciton phases into account. Finally, drawings and visualizations were produced.
|
|
|
Bridge structure over the valley
Hroudná, Denisa ; Kostka, Vojtěch (referee) ; Koláček, Jan (advisor)
The subject of this diploma thesis is the design of post-tensioned road bridge over the valley. Two preliminary studies have been proposed and one of them was selected for more detailed processing. The selected variant is a box girder with a constant height 2,5 m. The construction id divided into five span and its total lenght is 240 m Span length of construction is 18,0 m. The construction was assessed for ultimate and serviceability limit state acording to standarts and regulation. Drawings and vizualizations ard parts of the diploma thesis.
|
|
| |
guest ::
RSS feed.