|
|
As-built Building Information model of the House
Zachová, Michaela ; Berková, Alena (referee) ; Volařík, Tomáš (advisor)
This diploma thesis deals with the creation of an information model of an existing family house based on data obtained by laser scanning. The first part of the diploma thesis contains information on the issue of the BIM method, its state in the world and in the Czech Republic. It also describes the principle of laser scanning. The next part of the work is devoted to the practical processing of the information model of the building in the environment of the Revit software. The output of the practical part is the building model itself and simplified building documentation created from it.
|
|
|
Verification of quality of the cadastral map in cadastral unit Heroltice u Tišnova
Mikošková, Tereza ; Zvolská, Hana (referee) ; Berková, Alena (advisor)
The thesis deals with verifying of quality of the cadastral map in cadastral unit Heroltice u Tišnova. The subject of this work is survey mainly of perceptible borders and perimeters of buildings in the urban area of village Heroltice and comparing the collected data with the current cadastre map in the cadastral area pursuant to paragraph 13. and 15. of the annex to the regulation no. 357/2013 (cadastral regulation). The purpose is to detect possible inconsistency, to propose a specific solution, and to create a base for cadastral office Brno-venkov, which can be used for example to decide about the renewal of cadastral using new mapping and in negotiations with owners during detection of borders.
|
|
|
Creation of documentation of temporary traffic signs
Mrázková, Veronika ; Andělová, Pavla (referee) ; Berková, Alena (advisor)
This bachelor thesis deals with the issue of creation of graphical documentation of temporary traffic signs and points out the mistakes the contractors sometimes make while creating such documentation. For this kind of documentation, the thesis proposes its own solutions of drawing map bases using web map services. It also deals with the creation of two custom map symbols libraries with the theme of permanent and temporary traffic signs and custom project documentation in the program MicroStation PowerDraft V8i.
|
|
|
Creation of Digitalized Cadastral Map in Cadastral District Šošůvka
Lisoňková, Lucie ; Zvolská, Hana (referee) ; Berková, Alena (advisor)
Master´s thesis deals with creation of digitalized cadastral map in cadastral district Šošůvka. Analog maps in the old cadastral scale 1 : 2880 in the urban part of cadastral territory is revised. Externals was revised on the basis of comprehensive landscaping to digital cadastral map. Creation of digitalized is processed according to the current Instructions for Reconstruction cadastral including both amendments. The first part is devoted to the theory of cadastral and development and course of digitization. The main part of the thesis consists of the processing of the measured data and provided data by land registry.
|
|
| |
|
| |
|
|
Setting out of the part of the cadastral boudary
Votoupal, Martin ; Staňková, Zuzana Pecinová (referee) ; Berková, Alena (advisor)
This master thesis deals with identifying cadastral boundary between cadastral areas Holštejn and Lipovec u Blanska. The first part deals with the fundamental theoretical data that are required to create this thesis. In the second part there are analyzed the procedures and actions at various stages of formation of the thesis. The main output of this thesis will be the survey sketch for the geometric determination of cadastre unit. After consultation with employee of cadastral workplace, setting – out of the cadastral boundary will not be realized.
|
|
|
Creation of Digitalized Cadastral Map in Cadastral District Zakřany
Buršíková, Monika ; Cwik, Jan (referee) ; Berková, Alena (advisor)
This thesis deals with renewal of cadastral documentation in cadastral area of Zakřany. The area of interest is only the urban part of village of Zakřany. The documentation of non-urban areas was renewed based on complex land adjustment resulting in a digital cadastral map valid from October 8, 2012. In the urban area the original analog cadastral map in scale 1:2000 is still valid. This map was created based on results of technical-economical mapping in 1969. Parcels still registered in so called simplified register will be removed based on maps of former land cadastre. The result of the master's thesis will be draft of digital cadastral map created in MicroGEOS Nautil program.
|
|
|
Creation more accurate raster of the cadastral map in the cadastral district Těchanov
Válková, Zuzana ; Gregor, Karel (referee) ; Berková, Alena (advisor)
The thesis is dedicated to creation more accurated raster of the cadastral map in the cadastral district Těchanov. In the introductory part theoretical findings from the area of more accurate transformation are summarized and several terms related to raster problemacy are explained. The following chapter deals with the used software. Another part deals with description of the practical part, i.e. making out transformational key accurating transformation. The final chapters are dedicated to verifying the result of transformation by an independent control using the comparison of lenghts directly measured in terrain, measured on the original map of land cadastral or cadastral map and lenghts discovered from raster scan images before and after accurating transformation.
|
|
|
The model of a family house in Revit
Soukup, Štěpán ; Hanzl, Vlastimil (referee) ; Berková, Alena (advisor)
This diploma thesis focuses on processing and data collecting for the use of creating functional 3D informating model that we call BIM (Building Information Modelling) which is getting more and more attention throughout building industry and it is used by all of the participants in the industry from designers and architects to those who are dealing with building installations. This process is slowly getting into legislations of many countries including Czechia. The thesis is divided into two parts where one of them is describing the Building Information Modeling in general and the other part is describing the work which is behind the colleting good data which is needed when making the 3D documentation in Revit software which is wildly used for designing building constructions. Practical part of the land surveyor´s work is devided here into two parts where one of them is dedicated to collecting data by laser scanning process, GNSS and measuring by total station and levelling machine. Second part focuses on the description of the data processing in order to make 3D model. The example of the output production data is the BIM 3D model of the family house in selected level of detail and besides that we also have the visualization of both interior and exterior and 2D simplified building documentations.
|
guest ::
RSS feed.