|
|
CIP Safety
Šmoldas, Michal ; Stibor, Karel (referee) ; Štohl, Radek (advisor)
This master´s thesis deals with the analysis of CIP technology and the creation of laboratory tasks from components based on this technology. The aim of the thesis is to create a literary research on CIP technology and its individual extensions focusing on CIP Safety. Further, a functional laboratory panel is assembled from the available components in the FEKT VUT Brno laboratory supporting this technology CIP Safety, specifying the assignment of the laboratory task. Functionality of the panel has been verified by the SW solution of the laboratory task with visualization and control of the virtual production line. The result of the work is literary research on CIP technology, functional laboratory panel, specification of assignment of laboratory task and SW solution of task with visualization and control of virtual production line.
|
|
|
Scanning capillary column by color scanner and zones recognition
Wojnar, Petr ; Petyovský, Petr (referee) ; Štohl, Radek (advisor)
The master’s thesis focuses on creating an application for scanner control through WIA interface. This aplication is used for reading capillary during electrical separation methods in analytic chemistry. Scanned pictures of capillary are possible to process using online application for detection of significant zones within experiment. Offline detection of a set of scanned pictures is also possible. These applications have been created in LabVIEW environment made by National Instruments.
|
|
|
CIP Safety
Šindelek, Milan ; Stibor, Karel (referee) ; Štohl, Radek (advisor)
This master’s thesis deals with the security machinery using available technologies. It contains a description to assess and reduce the risk of machine design of security measures and their application. In each section are provides descriptions of the standards, using the CIP Safety communication technology, design and implementation security measures of machine at two demonstration learning tasks.
|
|
|
Laboratory Model for Simulation of Control of Simple Technological Process
Raška, Marek ; Štohl, Radek (referee) ; Jirgl, Miroslav (advisor)
The subject of this bachelor’s thesis is the improvement of the physical simulator of basic dynamic systems and the selection of suitable technological process to demonstrate simulation, control and visualization in laboratory teachings with a sample laboratory task. The result is an improved simulator used in the simulating of technological process using the programming structure and visualization of ControlWeb 8 application and input/output peripheral Datalab IO/USB.
|
|
|
Wind tunnel model with universal inputs and outputs
Holčík, Martin ; Kaczmarczyk, Václav (referee) ; Štohl, Radek (advisor)
The aim of this work is to design and implement a model of wind tunnel. The model can be controlled in various ranges of standardized signals in both analog and digital form. The model consists two fans - an electrically driven fan and fan driven by air stream. The outputs from the model are standardized signals, carrying information about the speed of second fan. The following document discusses the design of components, and subsequent implementation of the technical problems that occurred, a description of the final solution and the software part of the solution.
|
|
|
Application for the HAWK regulator
Kvasnička, Petr ; Štohl, Radek (referee) ; Jirgl, Miroslav (advisor)
This bachelor’s thesis deals with the issue of intelligent buildings management and practical use of the control system HAWK from company Honeywell. The thesis describes the basic problem of intelligent building management, exactly why they created and how it is possible to implement building automation, including a listing of available equipment that can be used in these systems. The thesis also discusses one of the systems that can be used for building control. The control system is called HAWK and thesis describes the programming environment and connectable peripherals. For a given control system is formed in the scrubbing practical demonstration device wind tunnel, which is shown using the work of the control system.
|
|
|
Upgrate of the barman machine
Kunz, Jiří ; Foukal, Roman (referee) ; Štohl, Radek (advisor)
The document describes the already realized device of the bartender, its components and the way of operation. Furthermore, the MagneMotion technology is analyzed in detail. The available components, their modifications and uses are described. The practical part describes in detail how to connect MagneMotion, create configuration files and the MagneMotion configuration itself. The last part of the work is a description of the creation of a utility program for the implementation of moving the glass between the bartender's dispensers. The individual parts of the program and the way of their solution are described in detail.
|
|
|
Control of model smart house
Běloušek, Petr ; Jirgl, Miroslav (referee) ; Štohl, Radek (advisor)
This thesis deals with control of smart houses. The second chapter contains acquaintance with current model of smart house, PLC and programming enviroment from B&R company. The last chapter is devoted to projecting of heating control and shade system control.
|
|
|
DC motor controler with feedback
Dundáček, Martin ; Štohl, Radek (referee) ; Bradáč, Zdeněk (advisor)
This thesis deals with DC motor control. Main goal was design and realization of DC motor controler module with feedback. The first part dwells on methods for DC motor control and HW design of control module. The second part describes development of software for the module, testing and sums up results.
|
|
| |
guest ::
