|
Preparation of Nanocomposites of Metal Oxides in Plasma Polymer and Study of Their Properties
Polonskyi, Oleksandr ; Biederman, Hynek (advisor) ; Novák, Stanislav (referee) ; Kadlec, Stanislav (referee)
Title: Preparation of Nanocomposites of Metal Oxides in Plasma Polymer and Study of Their Properties Author: Oleksandr Polonskyi Department: Department of Macromolecular Physics, MFF UK Supervisor of the doctoral thesis: Prof. RNDr. Hynek Biederman, DrSc. Department of Macromolecular Physics, Faculty of Mathematics and Physics, Charles University in Prague Abstract: This thesis is devoted to a study of nanocomposite films Al (Al oxide)/plasma polymer prepared by various techniques using magnetron sputtering, plasma polymerization and cluster beam deposition. The formation and deposition of metal/metal oxide nanoclusters using a gas aggregation cluster source (GAS) was also considered. The role of low concentration of oxygen in the aggregation gas on the process of Al and Ti cluster deposition was studied. Properties of the nanoclusters and nanocomposite films were characterized by various techniques. Morphology of the nanocomposites was examined by AFM, TEM or HRTEM and SEM. Elemental analysis and chemical composition of the films were studied by XPS and FTIR. Optical characterization of the prepared films was done by UV-Vis spectroscopy and spectroscopic ellipsometry. It has been shown that using GAS nanocomposite Al(AlxOy)/C:H may be prepared. Keywords: nanocomposite thin film, plasma polymer, metal...
|
|
XPS analysis of plasma polymers and nanocomposite films without breaking vacuum
Artemenko, Anna ; Biederman, Hynek (advisor) ; Čech, Vladimír (referee) ; Novák, Stanislav (referee)
Title: XPS analysis of plasma polymers and nanocomposite films without breaking vacuum Author: Anna Artemenko Institute: Charles University in Prague, Department of Macromolecular Physics Supervisor of the doctoral thesis: Prof. RNDr. Hynek Biederman, DrSc., Charles University in Prague, Department of Macromolecular Physics. Abstract: Plasma polymers and metal/ plasma polymer nanocomposites have been widely used for various biomedical proposes. Naturally, surface properties of the coatings such as high wettability, stability on the open air and in aqueous media, resistance towards different sterilization processes and cells adhesion are required for bioapplications. This thesis is mainly dedicated to the investigation of chemical composition of deposited coatings using XPS analysis. Nylon-like plasma polymer, PEO-like coatings, fluorocarbon plasma polymer (PTFE) films and Au/PEO-like, Ag/C:H, Al/C:H nanocomposites were chosen as the subject material. In addition, results of XPS measurements were used for the computer simulation for calculation of filling factor of metal/ plasma polymer nanocomposites. These results were in a good agreement with experimental data. Keywords: plasma polymer, nanocomposite, XPS analysis, bioapplication, simulation.
|
|
Application of methods of computational physics for the study of plasma-solid interaction
Hromádka, Jakub ; Hrach, Rudolf (advisor) ; Novák, Stanislav (referee)
Low-temperature plasma and its interaction with immersed solids is studied in this work. The research of the physical processes on this interface is performed by two-dimensional particle computer model. The model uses molecular dynamic method. Mutual forces between particles are computed by Particle- in-Cell method. The main application of the model is in the area of the probe diagnostic of plasma. Simple problems are compared with theory and two dimensional effects are discused. Contribution of particle modeling to plasma research is showed on the problem of interaction of sheaths around cylidrical probes. We deal with question whether we are able to get some information about unevennesses at the surface of solid immersed in plasma by measuring probe characteristics in its surroundings. We also studied the influence of plasma electronegativity on the parameters of sheaths around cylidrical probes. Powered by TCPDF (www.tcpdf.org)
|
|
Laboratory astrochemistry and applications of computer simulations
Roučka, Štěpán ; Hrach, Rudolf (advisor) ; Bonaventura, Zdeněk (referee) ; Novák, Stanislav (referee)
This work is focused on laboratory studies of ion chemistry at conditions relevant for astrophysics. The three main outcomes of the thesis are: (1) The experimental study of the reaction rate coefficient of the associative detachment reaction H- + H -> H2 + e-; measurement of the thermal rate coefficient at the temperatures in the range 10-135 K is described. (2) The design of a novel apparatus for detecting the electrons produced in the RF trap and measuring their energy; numerical simulations and preliminary experimental results are presented. (3) The development of a model of the electron cooling in the afterglow plasma and the application of the model in the analysis of the H3+ recombination measurements.
|
| |
| |
| |
|
Plasmonic Antennas
Kvapil, Michal ; Brzobohatý, Oto (referee) ; Novák, Stanislav (referee) ; Šikola, Tomáš (advisor)
Tato disertační práce pojednává o plazmonických anténách. Rezonanční vlastnosti plazmonických antén jsou studovány teoreticky i experimentálně. Teoretické výpočty jsou prováděny v programu Lumerical FDTD Solutions užitím numerické metody konečných diferencí v časové doméně. Pro experimentální studium byly antény vyrobeny pomocí elektronové litografie. Rezonanční vlastnosti vyrobených antén jsou studovány fourierovskou infračervenou spektroskopií. Práce se zaměřuje na studium rezonančních vlastností antén vyrobených na vrstvě nanokrystalického diamantu. Dále zkoumá možnost využití antén jako plazmonického senzoru funkcionalizovaného k detekci streptavidinu. Nakonec je představena anténa tvaru písmene V, u které dochází v důsledku porušení symetrie antény ke směrovému rozptylu dopadajícího světla. Tato směrovost se ovšem projevuje jen na vlnových délkách blízkých kvadrupólovému módu antény.
|
|
Preparation and Plasmachemical Reduction of Model Corrosion Layers on Iron.
Sázavská, Věra ; Novák, Stanislav (referee) ; Zahoranová, Anna (referee) ; Krčma, František (advisor)
The plasmachemical removal process of corrosion layers is based on a reduction effect of RF hydrogen low-pressure plasma, and it is used for archaeological objects. Incrustation layers on artifact surface become brittle and porous due to plasma processing. The structure and composition of corrosion layers is changed. Therefore, it is much easier to recover the original surface of the plasma treated artifacts in contrary to those treated by conventional ways. Moreover, we can save time on invasive and thus dangerous mechanical removal of corrosion layers as for example sanding is. After plasma treatment, we can observe fine details of the original surface and memory of tools used during its manufacturing. These details are important information on the origin and manufacturing methods of the artifacts. The plasma reduction process leads to the removal of impurities from cavities as well, and a function of mechanical components of archaeological object can be restored. Moreover, chlorides can be easily removed from the corrosion layers and thus any significant post-corrosion is protected. Each archaeological object is original and it has its own “corrosion history”. First, the object had been exposed to the atmosphere for a long time. Then, it had been often placed in a tomb or grave or it otherwise got into the soil or sea. Thus, each archaeological object was exposed to different corrosion stress (humidity, composition of corrosive environment, etc.). Due to these facts, any universal way of a corroded object treatment is very difficult or even impossible to propose. In this work, the problem was solved using model samples of common metals which were treated at various plasma treatment conditions. Archaeological objects made of iron are the most common artifacts, and the typical corrosion products on iron are akaganeite, rokuhnite, and szomolnokite. These three corrosion products were created on the model samples in laboratory and then, the plasmachemical reduction was applied for their removal. The experiment was done in a Quartz cylindrical reactor with capacitive coupled RF plasma created using outer electrodes. We used discharge power from 100 W to 400 W in a continuous or pulsed regime (duty cycle of 75 %, 50 % and 25 %). Flowing plasma was created in pure hydrogen at pressure of 150200 Pa. Sample temperature was monitored by a thermocouple, and it did not exceed 200C during all these experiments. This temperature is regarded as a limit temperature for metallographic changes of archaeological iron. Higher temperature can cause destruction of archaeological iron objects. The optical emission spectroscopy of OH radical was used for the process monitoring. We focused on the monitoring of OH-radicals generated in the plasma, which are characteristic species formed by this process. Each corrosion product has a different time evaluation of generated OH-radicals, which is closely related to the degradation of a given corrosion product. Corrosion layers were analyzed before and after the plasmachemical reduction by SEM-EDX. We have found that the plasmachemical reduction is not very suitable for the szomolnokite corrosion product, which is degraded with difficulty and at high applied powers, only. However, very good removal efficiency was obtained for the rokuhnite and akaganeite corrosion.
|
| |