|
|
Design of a New Filter Structure Employing Devices of Fractal Order
Detko, Adam ; Kubánek, David (referee) ; Bečková, Zuzana (advisor)
This thesis deals with fractional order analogue filtration structures. The first part focuses on theory of analog frequency filters, including fractal order. In the next part, some of the active elements that can be used in frequency filters designing are mentioned. In the third part, known integer order filtration structure working in current mode is shown, which is modified to fractal in the next part. Modification to fractional order filter is realized by the RC structure Foster I, which approximates fractal order element, also known as pseudocapacitor. This part also contains calculations. Next part contains simulation results, that have been made with ideal models of active elements. The fifth part deals with the design of original filtration structure and its subsequent modification to fractal order filtration structure. Last part contains results of simulations and their comparison with the theory and for low pass as well comparison with physically measured values.
|
|
|
Noise Analysis of Basic Circuits for Analog Signal Processing
Humpolíková, Michaela ; Sládok, Ondřej (referee) ; Kubánek, David (advisor)
The cause of noise in analog circuits is a problem of quality in output signals. There are many reasons of its occurrence, noise is caused by components connected into the circuit, and the assembly itself. This bachelor thesis summarizes the theoretical knowledge about noise analysis. Noise measurement in circuits can now be calculated with PSpice, the results are used for the design of low noise circuits. In the contained practical analysis of the circuits were achieved the results for the suitable designing of low noise circuits.
|
|
|
Headphone amplifier with low output impedance
Zavřel, Petr ; Kubánek, David (referee) ; Hanák, Pavel (advisor)
Semestral thesis deals with design of headphone amplifier with low output impedance in audible spectre suitable for laboratory measurement. Amplifier can proces balanced and unbalanced input signal with implemented protection against damage to amplifier. Concept is designed for the lowest total harmonic distortion and signal to noise ratio of amplifier. Thesis also contains design of low-noise power supply. It works with already known circuits which was tested, improved and discused in the thesis. Thesis also deals with placement into suitable box.
|
|
|
Design of electronically reconfigurable filtering structures with modern active elements
Prát, Marek ; Kubánek, David (referee) ; Langhammer, Lukáš (advisor)
The aim of master's thesis was design of electronically reconfigurable filters. Adjustability of pole frequency or quality factor is possible. First part of thesis deals with theoretical analysis of filters, their operation modes, design of frequency filters using Signal-Flow graph method and parasitic analysis. The next part describes active elements used in thesis. In a third part, three reconfigurable filters are described and designed and their simulations and parasitic analysis are made. Last part deals with filter design in EAGLE and experimental measurement.
|
|
|
Digital Mixing Console
Přibyl, Libor ; Krajsa, Ondřej (referee) ; Kubánek, David (advisor)
The presented work deals with the issue of digital mixing console. The main focus is on the design of sub-circuits for the digital mixer and the construction into the 19 "rack unit. The thesis presents a detailed description of individual parts and their use. Thesis also includes complete device designs, including a power supply and additional circuits.
|
|
|
Design of linear structures on transistor level
Gajdoš, Adam ; Kubánek, David (referee) ; Koton, Jaroslav (advisor)
Bachelor thesis deals with the development of software for automated design frequency filters using active elements instead of inductors. The first part deals with the allocation of frequency filers by transmitted specrum and type of components used. It also deals with working mode in the circuit. Thesis also focuses on the description developmet environment in Wolfram Mathematica,and overall development and also advantages. The next chapter is devoted to the theoretical description of the program and all the necessary theoretical provisions, that are needed to manage the program, i.e. description modified nodal analysis, replacement of MOSFET transistor for Voltage Controlled Current Source and writing passive elements in programming language too. The last chapter is dedicated to the development of the program and detailed description.
|
|
|
Analysis of methods of measurement of fully-differential frequency filters
Kučera, Tomáš ; Kubánek, David (referee) ; Jeřábek, Jan (advisor)
This bachelor thesis is analysing methods of measuring of differential frequency-selection filters with usage of active elements especially in current mode. Firstly it describes techniques of scheme of differential frequency-selection filters in current mode and conversions of linkage from voltage to current mode. Next the thesis aims at methods of measuring of particular voltage converters to differential current and back from differential current to voltage, which are an integral part for measurements of differential frequency-selection filters in current mode. For verification of characteristics of solutions designed separately as well as in cascade with particular solvent of frequency-selection filter there were used simulation instruments SNAP and OrCAD there, chosen resolutions were constructed and its characteristics were checked during laboratory test.
|
|
|
Analysis of methods of measurement of fully-differential frequency filters
Kučera, Tomáš ; Kubánek, David (referee) ; Jeřábek, Jan (advisor)
This bachelor thesis focuses on measurements methods of differential frequency -selection filters with active elements in current mode. Firstly it describes differential frequency-selection filters in current mode and conversions from voltage to current mode. Next the thesis deals with measuring of particular voltage converters to differential current and back from differential current to voltage, which is an integral part for measurements of differential frequency-selection filters in current mode. For design of particular converters there was used program OrCAD there and subsequent simulation was executed in program PSpice.
|
|
| |
|
| |
guest ::
