|
|
Proposal of a new type of steam turbine blade attachement
Vrbický, Jiří ; Petruška, Jindřich (referee) ; Polzer, Stanislav (advisor)
This thesis describes design of new circumferential blade attachment on last grade of steam turbine and following stress-strain analysis by FEM with static and cyclic loading. It was created two new design of geometry, which were created based on existing and operating constructional solution of oblique double T blade attachment. It was made stress-strain FEM analysis on original design of blades. Its results served to realize change of construction. Their target was increase load capacity and service life of new types of blade attachment.
|
|
|
Properties of electrode materials for alcaline accumulators
Fusek, Petr ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
The Bachelor´s Thesis is aimed at the problematic of the binders, that effects the features of the positive electrode of alcalic accumulators. The additive used on nickel´s electrode was cobalt. In the practical part of this thesis there is described a process for etching the nickel electrode and the following electrodepositions applied on these electrodes. Measurements of different concentrations of nickel and cobalt were examined and analysed in the graphs which are part of this thesis. There have been made comments of these graphs and the conclusions and observations as well.
|
|
|
Proposal of a new type of steam turbine blade attachement
Vrbický, Jiří ; Petruška, Jindřich (referee) ; Polzer, Stanislav (advisor)
This thesis describes design of new circumferential blade attachment on last grade of steam turbine and following stress-strain analysis by FEM with static and cyclic loading. It was created two new design of geometry, which were created based on existing and operating constructional solution of oblique double T blade attachment. It was made stress-strain FEM analysis on original design of blades. Its results served to realize change of construction. Their target was increase load capacity and service life of new types of blade attachment.
|
|
|
Design of air conditioning system of a flat
Vrbický, Jiří ; Zerzaňová, Alena (referee) ; Hejčík, Jiří (advisor)
The diploma thesis is consisting of theoretic part, which deal with used ventilating systems, ways of waste heat recovery and describe basic types of air-conditioning systems. Following part attend to design of ventilating system and multi-split air-conditioning system for flat. Part of design of ventilation system is calculation of noise levels in rooms. Air-conditioner design is based on calculation of thermal stress. Annual demand of cold and heat demand are calculated using TRANSYS software. Design documentation is part of the diploma thesis.
|
|
|
Properties of electrode materials for alcaline accumulators
Fusek, Petr ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
The Bachelor´s Thesis is aimed at the problematic of the binders, that effects the features of the positive electrode of alcalic accumulators. The additive used on nickel´s electrode was cobalt. In the practical part of this thesis there is described a process for etching the nickel electrode and the following electrodepositions applied on these electrodes. Measurements of different concentrations of nickel and cobalt were examined and analysed in the graphs which are part of this thesis. There have been made comments of these graphs and the conclusions and observations as well.
|
|
| |
|
|
New electrode structures for alkaline accumulators
Fusek, Petr ; Novák, Vítězslav (referee) ; Vrbický, Jiří (advisor)
Master´s thesis is focused on development of electrodes used in alcaline accumulators, by using new kinds of materials and compounds. Basic possitive eletrode was made of nickel, on this electrode were applied new layers of Ni(OH)2 by using the method called electrodeposition. For electrodeposition was used solution with Ni(NO3)2 in diverse concentrations. Later on, this material was enriched with aluminium admixtures to increase stability of alfa modification in Ni(OH)2. These concentrations were measured and analysed in diagrams. For measurement was used device Biologic. The diagrams were commented with recommendations for production use in accumulators.
|
|
|
Influence of Al ionts in nickel hydroxide on behaviour of electrodes
Růžička, Tomáš ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
This master's thesis is concerned with the influence of aluminate ions added in various concentrations into the structure of nicel hydroxide that creates Ni-Cd accumulators positive electrode active mass basis nowadays. Nicel hydroxide occurs in two basic modifications ? and ß. Nowadays used ß modification reaches low capacity in comparison with ? modification. The disadvantage of ? modification is its instability and gradual degradation to ß modification. The aim of this diploma paper is to select the optimal amount of aluminate additives into the structure of nicel hydroxide with regard to electrochemical efficiency, stability, and degradation degree of the accumulated layer.
|
|
|
Influence of Mn ionts in nickel hydroxide on behavour electrodes
Cirkovský, Jaroslav ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
The aim of my diploma thesis was to explore the influence of manganese ions put into nickel nitrate structure. The attention was focused mainly on the stabilization of nickel nitrate a modification, which could not change into b modification. The theoretical part of my thesis focused on applied materials, kinds of acumulators, basic parameters of acumulators and the description of chosen methods of measurement employed. It contained the electrodeposition, the impedance spectroscopy and the cyclic voltammetry. The task of the experimental part was to measure the effect of manganese ions put into potassium hydroxide structure. Proportions of Ni (nickel nitrate) : Mn (manganese nitrate) 10:0, 7:3, 5:5, 6:1 and 6:4 were blended for the measurement. By means of the electrodeposition, there was a thin layer of nickel hydroxide with an admixture of manganese ions from nickel nitrate and manganese nitrate dilution put on the nickel plate. After the spread of the thin layer on the nickel plate, the measurement by the method of cyclic voltammetry followed. The next task consisted in trying to add KOH (potassium hydroxide) anionic and cationic surfactant into the dilution.
|
|
| |
guest ::
RSS feed.