|
|
Microsurfacing using Reclaimed Asphal Pavement
Kolesniková, Simona ; Valenta, Jakub (referee) ; Šperka, Pavel (advisor)
The road network in the Czech Republic is almost 55,738 km long and its maintenance has been underfunded for a long time. It is therefore necessary to look for ways to extend the overall service life of roads. Microsurfacings belong to the emulsion slurry layers and are made up of a thin layer of a mixture of aggregate and modified asphalt emulsion. It is a pavement maintenance technology used to extend the service life of pavements by 5 to 9 years. As the supply of quality aggregate is gradually decreasing and the price of feedstock for microsurfacing is increasing, the possibility of incorporating R-material into this technology needs to be addressed. This thesis deals with the replacement of natural aggregates in microsurface R-material in the amount of 100 %. In the framework of the work, the formulation of the microsurface with R-material was optimized.
|
|
|
Heart rate measurement system with wireless data transmission
Valenta, Jakub ; Arm, Jakub (referee) ; Michalík, David (advisor)
The presented Bachelor's thesis covers the topics of designing and manufacturing a device used for measurement of a car driver's pulse frequency. An electrocardiogram is used to measure cardiac activity. The measured data is sent wirelessly to a local server where it's stored in a prepared database. Correct function of the device is demonstrated through an experiment performed in the second part of the work.
|
|
|
Cable harness tester
Valenta, Jakub ; Valach, Soběslav (referee) ; Burian, František (advisor)
This semestral paper deals with the issues of testing and requirements examinations for cables and cable harnesses. These terms are defined in the work and the difference in their meaning is described. The work also describes the characteristic features of cables and cable harnesses, explains their importance and focuses in more detail on the variable properties that may change over time or that are dependent on manufacturing errors. The principles and procedures of tests of these properties are covered in the work and are the essence of the subsequent practical part. In this part, the work deals with the design of the measuring circuit prototype for testing of the insulation resistance of cables and their desired continuity in bundles. This design is then physically implemented, the processes of designing and implementing are described in detail and finally its functionality is tested and presented to the reader.
|
|
|
Development of method for lubrication regime evaluation in rolling bearing
Valenta, Jakub ; Čermák, Jan (referee) ; Šperka, Petr (advisor)
The aim of this master’s thesis is to develop measuring methods for evaluation of the lubrication regime in a rolling bearing. The first part of thesis maps several measuring methods according to which the lubrication mode can be evaluated. Based on the assessment of this part, electrical monitoring methods were selected. For application of these methods was constructed testing device with rolling bearing. Specific measuring chains based on selected methods were designed and verified by using initial tests on a ball-on-disk tribometer. According to the results of these initial measurements was selected and applied suitable measuring chain to the selected test device. In the end, there was a successful measuring the lubrication parameter on the rolling bearing. Additionally, other tests dealing with the influence of temperature and type of oil on the measurement itself were performed.
|
|
|
Methodology of identification of revisions and inspections of technical equipment for a manufacturing company based on the requirements of ISO 45001
Valenta, Jakub ; Jandová, Kristýna (referee) ; Bača, Petr (advisor)
This work deals with the issue of inspections and revisions of technical equipment according to safe operation standards on the basis of OSH and FP requirements. In the introduction, these fields of work safety and fire protection are described, which will be used in later parts of the work. Subsequently, the term „technical equipment“ and subcategories of this issue are defined, with each of the subcategories being specifically approached. As a result, the thesis describes why it is necessary to regularly inspect the technical equipment, while the individual types of inspections are subsequently defined. This is accompanied by the distribution of the person’s rights to carry out individual inspections and the distribution of responsibility for the inspections carried out. The acquired knowledge is then used to create a model of the process of regulation of inspections and revisions and to create an overview of periodic inspections and revisions of technical equipment for a manufacturing company. This model and review of inspections are then considered the output of this bachelor’s thesis.
|
|
|
Agreements and Disagreements between Automatic and Human Speaker Recognition
Valenta, Jakub ; Matějka, Pavel (referee) ; Rohdin, Johan Andréas (advisor)
Tato práce se zabývá problémem rozpoznáváním mluvčího. Uvedený pojem je definován a doplněn o jednotlivé metody, které s ním souvisí. Cílem práce je poukázat na shody a rozdíly mezi lidským a automatickým procesem rozpoznávání mluvčího. V úvodu práce jsou popsány teoretické poznatky z obou zmíněných oblastí, tj. na jaké aspekty lidské řeči se zaměřuje člověk, resp. automatický systém. Následně je provedeno několik experimentů, které mají za úkol srovnat tyto dvě metody. Tyto experimenty jsou vyhodnoceny tak, že je možné pozorovat, které testovací úlohy dokáže lépe vyřešit člověk, aby následně bylo možné tyto poznatky použít ke zlepšení funkce automatického systému. V závěru práce je takovýto návrh na zlepšení automatického systému předveden a otestován. Testování proběhlo úspěšně a byla zaznamenána vyšší přesnost při vyhodnocování. Takový výsledek tedy může být užitý v dalších výzkumech a umožnit tak další vývoj v oblasti automatického rozpoznávání mluvčích.
|
|
|
Heat treatment of maraging steel processted by SLM
Valenta, Jakub ; Vaverka, Ondřej (referee) ; Koutný, Daniel (advisor)
The bachelor thesis deals with the study of the heat treatment of the maraging steel 1.2709 (DIN X3NiCoMoTi18-9-5). The first part of the work is survay of studies that focus on heat treatment of maraging steel made by forging or Selective laser melting technology. Based on that section, a heat treatment was designed by which the samples manufactured on ProX 300 from company 3D Systems and M2 Cusing from company Concept Laser were treated. The effect of heat treatment on the mechanical properties of the samples was subsequently tested by tensile testing and metallographic analysis. The test results of both sets of samples were compared with each other and with the results of other studies and the impact of the described heat treatment on the material was evaluated.
|
|
|
Funding of political parties - legal regulation, control, transparency
Valenta, Jakub ; Antoš, Marek (advisor) ; Mlsna, Petr (referee)
The subject matter of this paper is an analysis of the current system of political parties funding in the Czech Republic. The aim of the thesis is to critically assess the current legal regulation and to point out potential shortcomings and possibilities for improvement. At a time when public confidence in political parties is characterized by a systematic and long-term downward trend, it is a recent and widely discussed topic. We may well ask whether the legal regulation of this issue does not provide room for improvement and innovation. The extensive topic is structured into two areas - the question of financial resources and the question of control and transparency. The paper is composed of five chapters. Chapter one deals with the political parties in general and with the law of political parties, especially with constitutional aspects. The second chapter examines the financing of political parties, its basic principles, models and division. In brief, it covers also the development of funding. The subject of the third chapter is a detailed description of the funding of political parties in the Czech Republic. In the fourth chapter the thesis deals with control, transparency and enforcement, at both the general and the specific level, when Czech regulation is subject to scrutiny. Chapter Five is...
|
guest ::
RSS feed.