|
|
Design and implementation of educational CubeSat
Košút, Martin ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
This thesis describes the design of a CubeSat with a 1U (10x10x10 cm) size, which will be used in laboratory tasks. It includes mechanical construction printed on a 3D printer with six photovoltaic cells, mounted on the top. Cells will produce electricity to power all systems and to charge the onboard NiMH batteries to make the CubeSat independent of other sources of energy. The proposed design of an electrical power supply system and an onboard computer combined with a communication system is based on off the shelf components. The two-way wireless communication link between computer and a CubeSat is realized thanks to the ground station, which is also part of a design. Students will make other systems, which will communicate with the built in onboard computer via internal RS 485 communication bus. Internal EEPROM memory is used to save measured values. Modularity, possible future expandability, and easy repair in case of any failure were the key optimization parameters of the design.
|
|
| |
|
|
Bluetooth Vibrating Ringer
Dočekal, David ; Dušek, Martin (referee) ; Povalač, Aleš (advisor)
This thesis is focused on the implementation of Bluetooth communication between a mobile phone and an external device. The first chapter focuses on Bluetooth technology in general. It describes the interface, device classes according to RF power, Bluetooth versions, security and pairing options. The second chapter of the Bachelor’s thesis deals with the Bluetooth module called HC-05. It describes the basic features and practical, module usage. It also shows the concept of the Bluetooth unit and describes the adjusting of certain parameters of the HC-05 module using the AT commands. The third chapter summarizes the deign and implementation of the device. Software and firmware development is overviewed in the fourth chapter. The testing and measurement results of the complete device are presented in the last part of this thesis.
|
|
|
Automated garden system for outdoors
Stupka, Tomáš ; Povalač, Aleš (referee) ; Frýza, Tomáš (advisor)
The aim of this semester work is to design and implement an automated irrigation system for use in a family house based on the Raspberry Pi platform and AVR processors with the possibility of automatic adaptation to outdoor temperature and humidity conditions. The design also includes a web interface using the NodeRED interface for manual control and monitoring of data collected from individual wireless sensor modules
|
|
|
Bluetooth® Low Energy Vehicle Keyless Entry
Šterc, Filip ; Povalač, Aleš (referee) ; Frýza, Tomáš (advisor)
Tato práce se zabývá návrhem demonstračního kitu bezlíčového přístupu pro vozidla s využitím nejnovějších integrovaných obvodů Bluetooth Low Energy a budičů automobilové sběrnice od společnosti ON Semiconductor. Aplikace umožňuje ruční i automatické odemykání dveří vozidla ze vzdáleného klíče realizovaného chytrým telefonem. Řešení se zabývá detekcí vzdálenosti vzdáleného klíče, bezpečností BLE spojení a komunikací přes automobilovou sběrnici LIN mezi moduly demonstračního kitu.
|
|
|
Advanced Weather Station with Image Transmission
Augustin, Stanislav ; Fedra, Zbyněk (referee) ; Povalač, Aleš (advisor)
The content of this diploma thesis is a hardware and software design of advanced weather station with image transmission. The meteostation consist of two units - outdoor and indoor unit. Outdoor unit provide processing measured values from temperature sensor, atmospheric pressure sensors, rain gauge and windmeter. It also provides processing of captured image and wireless transmission of measured values to indoor unit. Indoor unit should provide comfortable meteostation controlling and visualization of weather situation by web interface.
|
|
|
Radio Telemetry for RC Aircrafts
Žák, Tomáš ; Fuchs,, Michal (referee) ; Povalač, Aleš (advisor)
Master‘s thesis is focused on problematic about state of RC plane model during the flight. Device is able to measure overload, height, position, pressure and velocity of the flight and store this measurement data to memory medium. The main aim of the master‘s thesis was to design a functional board, firmware for device and design simple program for evaluating of measured data. Involvement consists of five basic parts. First part is microcontroller, which processes measurement data and communicate with others parts. Next is accelerometer. Accelerometer is used for scanning overload of the plane. Barometer is used for measurement of height and pressure. For measuring position and velocity is used GPS module. Last part is memory medium. MicroSD is used as memory medium for storing measurement data. Evaluation of measured data is realized as simple program with base graphical user interface. Program was created in Matlab.
|
|
|
Active Loudspeaker Crossover with DSP
Václavík, Jiří ; Fedra, Zbyněk (referee) ; Povalač, Aleš (advisor)
Semestral thesis is devoted to mapping and verification technologies for the project active loudspeaker crossover using DSP. Three way systém will use open baffle. Design of analog crossover is complex due to the need of compensating for acoustic short circuit and properties of laudspeakers.
|
|
|
Intelligent LED Light
Krejčí, Martin ; Frýza, Tomáš (referee) ; Povalač, Aleš (advisor)
The aim of the bachelor thesis is to design and implement a prototype of intelligent LED lighting with the possibility of mixing colours (cold white, warm white, red, green and blue) and with integrated motion, smoke, temperature and pressure sensors, which can be connected to an island photovoltaic system. Create a control unit and a W(LAN) unit that will allow communication outside this closed bus using a web interface. Establish appropriate and reliable communication between all proposed system units. The thesis first describes lighting, its history and the use of multi-colour LED lighting today. Then all the buses used are described. The design of the device itself consists of a 3D model of the prototype LED lighting embedded in the ceiling, followed by the selection of the specific integrated circuits, microcontroller kits and other peripherals needed. At the end of the paper, the measurement results of all the designed components of the device are summarized.
|
|
|
Drum Machine for Musicians
Spáčil, Tomáš ; Fedra, Zbyněk (referee) ; Povalač, Aleš (advisor)
The aim of this work is to create a functional prototype of a drum machine with sound generating using a microcontroller. Introduction is devoted to general drum machine and an analysis of its parts, principle and basic modes of operation. The following chapter deals with the principle of digital signal processing and sound generation using a microcontroller. Part of this chapter is focused on mixing using compression methods. The core of this work is to design my own block structure and overall scheme of the drum machine with a description of the parts. Followed by analysis and implementation with theoretical and practical point of view. It is mainly about presentation and description of important parts of firmware codes, DPS design and another technical documentation useful for final prototype production. The conclusion contains a summary of the results with prezentation and discussion.
|
guest ::
