|
| |
|
|
Planetarium in Brno
Revayová, Veronika ; Pilgr, Milan (referee) ; Pešek, Ondřej (advisor)
The design of several variants of the structure of the planetarium in Brno is the subject of the diploma thesis . The building has a ground plan size of 30x30 meters. The main supporting material is S235 steel. The bearing structure of the object consists of columns, joists and beams. The bearing structure of the dome consists of a spatial structure, which is formed as a half-globe above the diameter of 18 meters. 3 versions of this dome have been processed. The resulting design is Geodetic Dome. Part of the work is an assessment of the main structural elements and selected details. The Scia engineer 2016 version 16.1.3033 was used to calculate internal forces.
|
|
|
Multifunctional multi-storey building
Kántor, Albert ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
The aim of this thesis is a design of a multifunctional multi-storey building consisting of six floors which is located in Česká Třebová. The floor dimensions of structure are 56,5 x 26,5 m and its height is 22,150 m. The building is covered with green roof. The mail load bearing structure consists of primary beams, secondary beams, columns and vertical bracing. The floor structure is designed as a composite steel and concrete structure. The spatial rigidity of the structure is secured with vertical bracing and rigid concrete roof slab. Main used materials are structural steel S235, S355 and concrete of grade C25/30.
|
|
|
Outbuilding to sport hall
Matějková, Pavla ; Pešek, Ondřej (referee) ; Barnat, Jan (advisor)
Bachelor's thesis contains a design of steel structure of a outbuilding to sport hall placed in the city of Lanškroun. The ground dimensions are 36.0×20.0 m, the height of the ridge is 10,0 m, the roof if arched. Inside the building there is a built-in structure with a 18.0 x 20.0 m ground dimension. The ceiling structure is designed as a composite steel and concrete structure with a trapezoidal sheet, mounted on a system of primary and secundary beams that are vertically mounted on pin-suported beam. A structural material of construction is steel S235 grade.
|
|
|
Roofing of the grandstand in Pohořelice
Horníčková, Kateřina ; Horáček, Martin (referee) ; Pešek, Ondřej (advisor)
This bachelor’s thesis deals with the design of the steel structure roofing of the grandstand in Pohořelice. The plan dimensions of the structure are 19,35 x 5 m, the height is 3,35 m. The main load-bearing structure is a curved L-shaped frame with variable cross-section. Stability is complemented by couplings in vertical and roof planes. There are two braced bay. The roof structure is placed on wooden purlins. The construction material is steel S235 and wood class C20.
|
|
|
Shopping centre
Kántor, Albert ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
The aim of this diploma thesis is a design of a bearing structure of a shopping center, situated in Brno. The structure is a U-shaped building with horizontal dimensions 120 x 45 m. In the front of the building there is a structure in a shape of a tower 24 m tall that is embedded into the main part. Beside this part, the building is covered with green roof. Materials used are steel S355 and concrete C25/30. The structure consists of columns and horizontal beams. The stiffness is secured by vertical stiffeners and by floor structures from reinforced concrete. Two variants were designed and compared. One is composite steel and concrete structure, the other one is just a steel structure. After evaluating both variants, the composite one was chosen and elaborated in more detail. Calculations were done according to valid Eurocodes.
|
|
|
Steel structure of exhibition pavilion
Kárník, Miroslav ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
The goal of the bachelor’s thesis is to design and assess a steel structure of the exhibition pavilion in Česká Třebová. The ground plan dimensions of the load–bearing structure are 30 meters in width and 63 meters in lenght. The maximal height of the structure is 12 meters. Main frames are made of truss girders of atypical shape. The girders are pin–supported on solid columns on one side and on foundation pads on the other side. The distance between the main frames is 6 meters, the distance between the solid purlins on the girder is 3 meters.
|
|
|
Steel structure of a sport hall
Vraňanová, Veronika ; Pešek, Ondřej (referee) ; Balázs, Ivan (advisor)
The aim of this work is to design and check the steel construction of the sports hall. The maximum dimensions of a floor plan are 72,0 m x 37,58 m. Construction is embedded in terrain, with the total height 13,47 m and 9,97 m above the terrain. The lattice arched crossed link is the main supporting part that is anchored to a concrete panel on each side, using a pair of pins.The roof cladding is made of sandwich panels and is supported by truss purlins. Space stability is ensured by cross bracing and longitudinal bracing.
|
|
|
Gymnastics hall in Púchov
Mikulica, Adam ; Horáček, Martin (referee) ; Pešek, Ondřej (advisor)
The aim of the bachelor thesis was to design and check the construction of a steel gymnastics hall. The structure consists of two connected parts, the mail hall whit the floor plan dimensions of 18x30 m and an extension of the floor plan dimensions of 9x30 m. The building is situated in Púchov. The modular distance of the main frames is 6 m. The computational model of construction was built up using Dlubal RFEM software.
|
|
|
Steel structure of heliport
Kuttelwascherová, Olga ; Horáček, Martin (referee) ; Pešek, Ondřej (advisor)
The main subject of this bachelor’s thesis is the design and static analysis of the freestanding steel structure of heliport in the hospital complex in Šumperk. The landing area has an octagonal shape and is 17 meters high above the ground. The main bearing structure consists of truss girders, which are supported by eight columns. Most of the bearing elements have a circular hollow cross-section. The spatial stability is ensured by the truss bracings. Members of the structure are from the structural steel S355. The internal forces and deformations were calculated by software Dlubal RFEM. The thesis also includes a technical report and a drawing documentation.
|
guest ::
RSS feed.