|
|
Lab exercise of electronic burglar alarm system with communication over Ethernet network
Harth, Petr ; Pust, Radim (referee) ; Burda, Karel (advisor)
This bachelor thesis deals with electronic burglar alarm systems that communicate over Ethernet network. On this basis, the lab exercise is designed for an integrated security system Xtralis 3000 to ensure access control and camera surveillance. The concept of lab exercise is justified, and prepared documentation for it. Subsequently, a brief analysis of the Xtralis 3000 system security is also made. The first part describes the development of electronic burglar alarm systems. The history as well as current state of the art of electronic burglar alarm systems are outlined. Also camera surveillance systems and access systems, which are nowadays combined with electronic burglar alarm systems, are briefly mentioned. The thesis goes on by describing the current trend of integrating various security systems into one system that communicates over Ethernet network. In the second part of this thesis the integrated security system Xtralis 3000 is being analyzed. First of all its general characteristics are described and then it goes on by explaining the distribution of the three subsystems, namely the access system S3000, the camera surveillance system V3000 and management software M3000. Subsequently, these systems are being described along with their features. After that, selected network protocols, which integrated security system Xtralis 3000 uses to communicate between its components, are being briefly discussed. In the third part a brief analysis of security integrated security system Xtralis 3000 is carried out. This system is divided into six parts in terms of threats of attacks. The fourth section it is devoted to the concept of lab exercise, which includes introductory balance sheet, the debate over the assigned elements, content and structure of the lab exercise. In the fifth part, is the thesis offers documentation to the lab exercise of integrated security system Xtralis 3000 communicating over Ethernet network, according to which students may perform this lab exercise. And finally, in the sixth part are the instructions for teachers, which describe how to introduce the lab exercise in teaching, with the associated problems and their solutions.
|
|
|
Lab exercise of the hidden camera and intercept.
Kočíř, Michal ; Pust, Radim (referee) ; Burda, Karel (advisor)
This thesis deals with design and build lab exercise of the hidden camera and intercept. The thesis describes the history of emission of safety, types of intelligence, intercept, camera and build their own laboratory experiments. The first chapter describes the history of the issue of safety. In the next chapter intelligence activities are focused on different types of intelligence. In Chapter interception mentioned the location, description and utilization, protection against eavesdropping and acoustic equipment GSM. Then the chapter describes the various camera parameters, location and detection. In other kapitel describes the concept of laboratory tasks. In the next chapter describes the design and build their own laboratory experiments. Then in the next chapter describes the design and build their own lab exercise. In this work are designed and assembled two lab exercise. The role of the laboratory deals with acoustical interception. The second deals with the role of the laboratory system of hidden cameras. The laboratory is the role of acoustic interception device used in radio memory analyzer MRA-3, with which you can find radio frequencies in the laboratory. In this lab exercise is also attached table of the laboratory spectrum. In the table are recorded audible radio frequencies to find in the lab. The table also recorded two intercept devices that we have attached the lab exercise. In the second lab exercise used hidden cameras are analogue devices video receiver, camera and video scanner XCS-99X. This role is focus tested the camera with attached zoom tools, which are accompanied by lab exercise. This target is gradually record in video receiver. The laboratory tested the role of distance function and image transmission between the camera and analog video receiver. Then tested the functionality of short smart noise generator SNG.
|
|
|
Entropic generator of random numbers
Kolář, Michal ; Číž, Radim (referee) ; Burda, Karel (advisor)
This paper is focused on generating random number via entropy generators. There are described sources of entropy on personal computer and described methods of detecting their entropy. There are also described basic operations used for construction and for concept solution this generator under NIST recommendation for personal computer and methods of their testing.
|
|
|
Cavitation in microfluidic orifice
Bohunský, Tomáš ; Burda, Radim (referee) ; Rudolf, Pavel (advisor)
This diploma thesis deals with cavitation flow in the microscale, which remains an area with a lack of sufficient description of this phenomenon. At the same time, microfluidics is a field experiencing a dramatic rise in numerous biochemical applications, which underlines the relevance of researches of this type. In theoretical part of the thesis, cavitation was described in detail. In the practical part, a microfluidic device with a cavitation orifice was designed and manufactured. The ANSYS program was used for this design. An experiment was performed with the designed microchip, the aim of which was to observe a cavitating flow on the orifice. This measurement took place at the microfluidic laboratory at Victor Kaplan Department of Fluid Engineering. Due to the failure of the experiment, a CFD model of two-phase cavitation flow was built. The conclusions of the thesis were compiled from the findings of measurement and the results of modeling.
|
|
|
Cavitation onset by liquid acceleration
Mračko, Patrik ; Burda, Radim (referee) ; Rudolf, Pavel (advisor)
The main goal of bachelor’s thesis is description of complex phenomenon of cavitation caused by acceleration and design of experiment focusing on its observation. Thesis consist of two parts. Theoretic research focusing on basic information about cavitation, its formation and significance. Second part is design of experimental observation with help of high-speed camera, evaluation of possible complications which may occur and their solution. Conclusion proposes possible application for research in area of wastewater treatment.
|
|
|
Hotspot system for more network operators
Strmiska, Roman ; Pust, Radim (referee) ; Burda, Karel (advisor)
Master’s thesis deals with the design and realization of a hotspot system for more Operators, it solves problems of QoS, billing of transferred data and distribution of services via a common wireless interface. The theoretic part is oriented to the selection of a suitable technology and explanation of a legislation, which relates to an activity of the hotspot‘s network. The practical part solves the choice of hardware, design and realization of the experimental network. In conclusion are tested transit parameters of the network and its functionality.
|
|
|
Possibilities of Error Controls in Frequency hopping Stations
Pust, Radim ; Kovář, Pavel (referee) ; Wieser,, Vladimír (referee) ; Burda, Karel (advisor)
The doctoral thesis deals with design of coding for frequency hopping stations in band with intensive jamming. In digital modulations erroneous determination of the modulation state occurs due to jam at the receiver side. The result is erroneously transferred symbols of the message. Errors created during the transmission can be eliminated by using error control systems. It is also possible to prevent these errors by using algorithms (techniques) of frequency hopping which select the appropriate channel. Appropriate communication channel is a channel with a lower probability of erroneous symbol in the message. The main contribution of this thesis is to design a new frequency hopping technique with collision avoidance (FH/CA). The station with FH/CA technique measures signal levels in the considered several channels before every jump. Based on the measurements the most appropriate channel with the lowest value of measured signal level is selected. Therefore, it is more probable that a jump to an unoccupied channel with a transmission will occur. Using a mathematical model, the performance of the newly proposed FH/CA technique is compared with the currently used techniques FH and AFH. Comparison criteria are the probability of a collision between an FH/CA communication system and a static (device transmitting continuously at a fixed frequency) or dynamic jammer (i.e. other FH or AFH systems). By comparing the values of the probability of jammed transmission, indisputable theoretical advantages of the new FH/CA technique were found, compared to the currently used FH and AFH techniques. The FH/CA technique always has better or equal results compared with the FH technique in the case of interference by static and dynamic jammers. The FH/CA technique in a band with static and dynamic jammers usually has better results than the AFH technique. A significant contribution of the FH/CA technique can be seen in the case of dynamic jammers. On the other hand, in the case of static jammers the FH/CA technique is in certain situations worse than the AFH technique. The accuracy of the mathematical models were successfully verified on a simulation model that was created as a part of this thesis in the MATLAB environment. Based on the obtained data from the model there was designed coding for frequency hopping stations with the new technique of frequency hopping FH/CA which is designed for small-volume data transfer in a band with intensive jamming.
|
|
|
Digital twin concept for hydraulic machines
Klement, Jan ; Burda, Radim (referee) ; Rudolf, Pavel (advisor)
The term “Digital twin” is associated with Industry 4.0. It is a projection of an object into a virtual environment, which enables to predict behaviour and explore the existing behaviour. In engineering, such objects can be components, machines, or entire companies. Subsequently, Digital twin helps to determine the most suitable operation depending on the conditions. This thesis deals with the possibilities of digital twin. Subsequently, it describes the current state of turbomachinery, concentrating in particular on hydraulic machines in the field of Digital twin. The final part of the thesis describes the concept for creating a Digital twin for a centrifugal pump.
|
|
|
Universal linux server for small and medium companies enabling simple network control
Juřena, Stanislav ; Pust, Radim (referee) ; Burda, Karel (advisor)
The main object of this thesis was to design a computer network for small and medium companies which will be made among others from network server providing simple network control. The next task was to provide internet connection to subscribers of local area network, their security and access to common services. There had been discussed the choice of distribution of Linux operation system with regarding to demanded services, stability and long lasting operation in theoretical part. One part of the work is a theoretic preliminary to separate services, to the purpose of their using and to their weaknesses. The practical part deals with an installation and configuration of Debian operating system, launching the base services and the setting of selected monitoring programs.
|
|
|
Peristaltic pump
Burda, Radim ; Fialová, Simona (referee) ; Pochylý, František (advisor)
Cílem této diplomové práce je navrhnout peristaltické čerpadlo pro hemodialýzu s ohledem na minimalizaci tlakových pulzací. Pomocí analytické analýzy je navržen nový koncept redukce tlakových pulzací, který využívá zrychlení k navýšení tlaku v prostoru mezi válečky. Fungování peristaltického čerpadla je simulováno pomocí programu Ansys Fluent pro získání lepší představy o proudění v čerpadle. Souběžně s návrhem nového konceptu bylo navrženo více tradiční čerpadlo, které bylo následně vyrobeno a experimentálně odzkoušeno. Data získaná z experimentu mohou být dále použita pro nový koncept.
|
guest ::
RSS feed.