|
|
Signal processing and receiving in UMTS system
Hron, Michal ; Hanus, Stanislav (referee) ; Kejík, Petr (advisor)
This semestral thesis be concerned with datailed analysis of receiving and processing signals in UMTS network system. Insistence of this work is setting to principals of RAKE receiver and processing signals in CDMA networks downlink channel. Through development system MATLAB simulates real function of RAKE receiver. This project is giving fundamental knowledges about receiving and processing of multipath signals to readers.
|
|
|
QoS in UMTS
Kavan, Radovan ; Hanus, Stanislav (referee) ; Kejík, Petr (advisor)
This thesis treats of QoS (Quality of Service) in UMTS system. The term quality of service is frequently used, recently, however not only in computer networks, but also more and more in mobile networks also. Present system of 2nd generation (2G) GSM enables only limited exploitation of QoS function. System UMTS is a system of 3rd generation (3G) already and contains quality of service in greater measure which is ensured with number of algorithms and functions. Individual QoS functions enable effective utilization of radio interface, support maintenance of planned coverage and offer high spectral efficiency. Functions that cater to quality of service are called RRM functions (Radio Resource Management). There exist five basic functions in UMTS system that are Admission control (AC), Power control (PC), Load control (LC), Handover control (HC) and Packet scheduler (PS). These functions are responsible for control of network access, control of power, control of network load, control of handover and packet (bit rate) scheduling. Last three functions are usually collectively designated as Congestion control, control of network overload. UMTS layer model, differentiation of services, traffic classes and 3GPP concept are also discussed. In thesis the attention is piad to Admission control algorithm – control of network access – in the uplink direction and to different ways of load (in the cell) modeling. Individual approaches are simulated in MATLAB. A possibility of using algorithm in the real system is discussed in conclusion.
|
|
|
Femto cells in next generation mobile networks
Bernkopf, Jan ; Štencel, Vít (referee) ; Hanus, Stanislav (advisor)
This paper provides theoretical analysis of LTE network and Femto cells. Its presents their modulation and transition techniques, their performance and of course implementation of Femto cells into LTE macro-layer. It also describes potential risk of interference between LTE macro-layer and Femto cells and provides the way how to solve and simulate interference. Finally it states simulation and analysis of model situations.
|
|
| |
|
|
Radio Network LTE Design
Tribula, David ; Kejík, Petr (referee) ; Hanus, Stanislav (advisor)
The diploma thesis deals with the design of the LTE radio part using the ICS Designer program. First, the work describes the signal processing in the physical layer LTE system, for downlink and uplink. Subsequently, it was made simple block diagram. The next part deals with models of signal propagation in the radio environment. The last part is an introduction to the ICS Designer. This section describes the base station design and demonstration of some simulations. The last part is devoted to the design of the mobile network in the given area, its simulation and subsequent comparison with the existing mobile network.
|
|
|
Signal Processing in Flarion System
Szajkó, Juraj ; Kejík, Petr (referee) ; Hanus, Stanislav (advisor)
Cílem bakalářské práce Zpracování signálů v systému Flarion bylo prostudovat způsoby zpracování signálu ve fyzické vrstvě a architekturu sítě Flarion. Na základě získaných poznatků při studiu fyzické vrstvy bylo za úkolem sestavit v prostředí Matlab model systému a simulace BER v závislosti na poměr vysílaného výkonu a výkonu rušivého signálu. V první části práce je detailní popis fyzické vrstvy Flarionu, probrána je baseband a OFDM modulace, LDPC kódování a frekvenční skákání. V druhém části práce je prostudována architektura sítě, ekvalizace, řízení výkonu, radiových zdrojů, a způsob handoffu. Ve třetí části práce je vytvoření downlink a uplink modelu v Matlab, dále je provedena simulace BER v závislosti na poměr vysílaného výkonu a výkonu rušivého signálu.
|
|
|
Optimization of Access to CDMA Networks
Kejík, Petr ; Masopust, Jiří (referee) ; Wieser, Vladimír (referee) ; Hanus, Stanislav (advisor)
The aim of this dissertation thesis is an optimization of access to CDMA networks. To be more specific, this thesis deals with an optimization of admission control in UMTS network. The first part of the thesis deals with the present progress of the particular topic. Thereinafter there is an analysis of admission control in UMTS system. An own UMTS simulation program was created in MATLAB. This program enables implementation and simulation of the selected admission control algorithms. The thesis is focused on load factor based, fuzzy logic based and genetic algorithms. The created UMTS simulator was used for the mutual comparison of all algorithms. The aims of this thesis are the suitable UMTS model design, evaluation and possible optimization of selected algorithms.
|
|
|
CDMA Network Capacity
Pasečný, Jan ; Kejík, Petr (referee) ; Hanus, Stanislav (advisor)
The Bachelor thesis deals with determining which factors influence the capacity of CDMA network. This type of network is now being used worldwide due to its huge increase in capacity when compared to other transmissions systems. The work contains summary of basic parameters of single-cell and multi-cell systems with reference to the capacity. Obtained results are assesed and compared at the end of the work.
|
|
|
Testing of the LTE basic parameters
Hocz, Jan ; Miloš, Jiří (referee) ; Hanus, Stanislav (advisor)
This thesis deals with brief introduction to LTE system and processing of signal in uplink and downlink. There is also presented some basic parameters that must be met for correctly working equipment in system. These parameters are divided for transmitter and receiver. From these parameters were chosen those, which can be measured in school labs with available measurement devices. For measuring these parameters were created instructions. For easier record of measured data was prepared protocol with blank tables.
|
|
|
Signal processing in ZigBee system
Miloš, Jiří ; Bradáč, Zdeněk (referee) ; Hanus, Stanislav (advisor)
Master's thesis The Signal Processing in ZigBee System is focused on properties of Physical Layer of ZigBee (standard IEEE 802.15.4 - 2003). The work consists of three parts. The first part contains common view on using and properties of ZigBee. The next part focuses on the Medium Access Control Layer and in detail on the Physical Layer. There described signal processing in the Physical Layer in individual radio bands. The last part of the project contains the process of modeling in the MATLAB for both models of system ZigBee (bands 868/915 MHz and 2450 MHz). The last part of thesis deals with the simulations of BER depending on Carrier-to-Noise Ratio. Also examined the coexistence of systems operating in the same or a nearby frequency band. Based on the results of simulations there are given recommendations for the use of the ZigBee system in minimizing BER.
|
guest ::
