|
Fluctuations in the scrape-off layer and edge plasma of the COMPASS tokamak
Seidl, Jakub ; Jiráková, Kateřina ; Adámek, Jiří ; Grover, Ondřej ; Horáček, Jan ; Hron, Martin ; Vondráček, Petr
We have identified two distinct types of turbulent fluctuations in COMPASS plasmas, the high-frequency edge oscillations and low-frequency SOL blobs. The transition region is localized in the near SOL, where both types spatially overlap and interact and the radial particle transport gradually transfers from high to low frequencies. Even though skewness of isat fluctuations is positive even inside LCFS, distinguishable Gamma-distributed PDF, formed by the low-frequency fluctuations, arises in the near SOL. This supports, together with turbulence spreading rate being positive in the near SOL but negative in the edge, the picture presented in [3] that most of the fluctuations that form a positive skewness in the edge region disappear around LCFS and new blobs are formed in the near SOL. Further, we cannot confirm the assumption that the blobs are generated randomly according to a Poisson process. Oscillations of all measured quantities, incl. radial particle flux, in the near SOL are peaked around ∼13 kHz. This seems to correspond to a poloidally rotating structure with a rather large poloidal wave-length ∼ 15 − 20 cm, that at least partly modulates blob generation. Nevertheless, we note that time separation of blobs becomes more random further in the SOL, possibly due to differences in their individual propagation. These observations hold for diverted plasmas, but the situation may be different in limited low-elongation plasmas where the radius of zero skewness was observed to be shifted significantly (several cm) inwards, compared to diverted configuration, and Gamma-like PDF is detected even inside the LCFS. Study of these plasmas is ongoing.
|
| |
| |
| |
|
Large displacement and deformation measurement by frequency sweeping digital holography
Psota, P. ; Lédl, Vít ; Kaván, František ; Matoušek, O. ; Doleček, R.
Recently, a digital holographic method called Frequency Sweeping Digital Holography (FSDH) for high precision measurements of surface topography of mechanical parts has been introduced. The greatest advantage of the presented FSDH is the fact that the measurement is absolute. i.e. optical path difference is independently retrieved in every single pixel. This approach can therefore be used also for measurement of large displacements and deformation. FSDH is particularly suitable in cases where the common digital holographic methods fail due to e.g. 2π unambiguity problem or speckle decorrelation. Measurement method principles, setup details, an some features of the method are discussed.\n
|
|
Surface profilometry by digital holography
Psota, Pavel ; Lédl, Vít ; Kaván, František ; Matoušek, O. ; Mokrý, P.
This paper presents newly developed method for measurement of surface topography based on frequency scanning digital holography. Digital holography allows for direct computation of the phase field of the wavefront scattered by an object. A tuning of the light source optical frequency results in linear phase variation with respect to the optical frequency. Slope of the linear function in every single pixel corresponds to absolute measurement of optical path difference and thus topography map of the surface can be retrieved. Principle of this contactless method is introduced and experimentally verified. The method can be used for measurement of complex geometries of common manufacturing parts as well as for topography measurement of complex composite structures, and active acoustic metasurfaces.
|
|
Use of holography for surface measurement and characteriaztion
Kaván, František
This research focuses on the use of digital holography for measuring the shape of optical and other surfaces. For the first experiments, we used a standard double-wave holographic interferometry method. This served as a reference. However, the main focus is Frequency Sweeping Digital Holography (FSDH), or scanning digital holography, which utilizes fluently translatable DFB laser diodes. The accuracy of this method can be further improved by combining measurements from multiple wavelengths - multiple diodes. When combined, this method can achieve accuracy of up to 2 μm.
|
| |
|
On tungsten spraying using inductively coupled plasma system - First results
Klečka, Jakub ; Mušálek, Radek ; Vilémová, Monika ; Lukáč, František
Thanks to its unique properties such as high melting point and density, tungsten and tungsten-based alloys are commonly used in a wide range of applications. Among others, these materials are promising candidates for the plasma facing components in the future fusion reactors. One of considered ways of production of these parts is plasma spraying. There are however several limitations for conventional gas stabilized torches, mainly in plasma enthalpy (i.e. the ability to efficiently melt tungsten particles in considerable feed rates) and susceptibility of tungsten to oxidation (which complicates spraying in oxidizing open-air atmosphere). The radio frequency inductively coupled plasma torch (RF-ICP) is a unique system which can potentially overcome both these problems and can be used for efficient tungsten spraying. The tungsten powder, which can be finer than the one used for the conventional systems, is fed axially into the hot plasma core, both factors lead to a more efficient melting of the particles. The deposition is performed in a chamber with controlled atmosphere of inert gas or decreased pressure, the oxidation is therefore suppressed. In this first study carried out with the newly commissioned RF-ICP system TekSpray 15 (Tekna), samples of tungsten coatings on graphite substrates were prepared. The X-ray diffraction and SEM images of the free surfaces and cross-sections were obtained, documenting high purity of the deposits and appropriate flattening of the splats leading to a dense coating microstructure. The effect of substrate preheating on the microstructure, porosity and hardness was also studied.
|
|
Thin nitride layers as permeation barriers
Veverka, Jakub ; Matějíček, Jiří ; Lukáč, František ; Pospíšil, D. ; Cvrček, L. ; Nemanič, V.
Permeation barriers represent one of the crucial fields in materials development for thermonuclear fusion. Primary objective of the barriers is to suppress the permeation of hydrogen isotopes (mainly tritium) from future thermonuclear fusion facilities. Secondary objective is to reduce their retention in structural materials. Expected reactor conditions put high demands on the material, as well as on the final barrier quality. Key properties are tritium permeation reduction, absence of defects (especially cracks), high-temperature stability and corrossion resistance, and compatibility with structural materials (mostly ferritic-martensitic steels). Thin nitride layers, identified as promising permeation barriers, were prepared by diffusion-based nitridation and physical vapour deposition (PVD), and characterized.
|