|
|
Controlled prodution of pullulan by yeast-like organism Aureobasidium pulluans
Skoumalová, Petra ; Obruča, Stanislav (referee) ; Márová, Ivana (advisor)
Bachelor's thesis is focused on study of influence of exogenous stress factors on biomass and pullulan production by microorganism Aureobasidium pullulans. As a part of this work an overview of stress factors, pullulan producers, its structure, function and technological use was introduced. In the experimental part growth characteristics of Aureobasidium pullulans and pullulan production during growth in optimum conditions and under stress were analyzed. The reduced availability of oxygen resulted in a decrease of biomass production accompanied by increased pullulan production. Chemical stress induced by NaCl significantly affected mainly biomass production. The highest production of pullulan was found at 15 g / l of NaCl. Ethanol stress exhibited growth inhibition and at higher concentration also lack of pullulan production. Peroxid stress exhibited no effect on pullulan production. Short-time exposure to low heavy metal concentration (Se(IV), Cr(III)) influenced pullulan production more positively than long-term effect.
|
|
|
Production of extracellular polymeric substances by Aureobasidium pullulans
Horáček, Pavel ; Breierová, Emília (referee) ; Márová, Ivana (advisor)
The diploma thesis is focused on the study of the influence of cultivation conditions and arrangement for the production of extracellular polymeric substances by using yeast-like microorganism Aureobasidium pullulans. In the theoretical part a brief description of A. pullulans, its use in biotechnology and produced exobiopolymers, especially pullulan and poly-L-malic acid are presented. The first aim of the experimental part was to set the most appropriate cultivation conditions for A. pullulans CCM 8182. Growth and production properties in optimum conditions were compared with cultivation on waste substrates - oat bran, buckwheat husks, apple fiber and others. Waste substrates can be used as cheap nutrient sources which enable reducing cost of potential biotechnological production. As a further part of this work, optimization of HPLC/RI method for analysis of exobiopolymers has been done. Optimal mobile phase composition and chromatography conditions were proposed. Column Roa organic acid H+ was the most suitable for simultaneous separartion of glucose and malic acid. Before HPLC analysis hydrolysis of polymers was done. Sulphuric acid (5 mmol/L) was used as a mobile phase at flow rate 0.5 mL/min and temperature 60 °C. The highest production of pullulan occurred using oat bran as a substarate (13.03 g/L) at an initial pH 7.5. Maximum production of poly-L-malic acid was observed during the cultivation on apple peels (2.89 g/L) at pH 6. It was found that the higher production of poly-L-malic acid occurred at pH 6, while higher production of pullulan was at pH 7.5.
|
|
|
Raman spectroscopy as a tool for analysis of biotechnologically relevant microorganisms
Záhorská, Linda ; Enev, Vojtěch (referee) ; Mgr.Ota Samek, Ph.D. (advisor)
The diploma thesis deals with the study of biotechnologically significant microorganisms, using the Raman spectroscopy. Content of the theoretical part is brief characteristic of Raman spectroscopy as a method, its use in practice and also use as a tool for monitoring of biotechnologically processes. Thesis was further focus on the biotechnologically significant microorganism Aureobasidium pullulans, its use in biotechnology and also for over-produced substances and in particular poly-L-maleic acid and pullulan. The content of the experimental part was study of selected strains A. pullulans, specifically stains as DSMZ, CCM F148 and CCM 8182, using Raman spectroscopy on the various types of culture media. Subject of practical part research was too production of extracellular polymers, acid poly-L-apple and pullulan, by selected strains A. pullulans. Objective of my thesis was described and determinate, spectra of individual strains as well as extracellular products, mainly pullulan, and then choose suitable production medium and optimal production strain A. pullulans. During experimental work was found, that optimal production strain was DSMZ strain culture on the mineral medium with the addition of yeast autolysate, which was optimal medium type. The content of the pullulan produced was for gravimetric determination, 6,3g/L, which also confirmed the results of the HPLC method. It was experimentally found, that Raman spectroscopy isn´t suitable method for quantification of extracellular products, but is appropriate and was used for PCA analysis of individual strains.
|
|
|
Microbial production of extracellular polymers and their involvement in stress response
Müllerová, Lucie ; Sedláček, Petr (referee) ; Obruča, Stanislav (advisor)
Bachelor’s thesis is focused on the production of extracellular polysaccharide pullulan by microorganism Aureobasidium pullulans, purification of pullulan and its possible use as a cryoprotectant. As a part of this work a description of A. pullulans, pullulan and an overview of involvement in its stress response were provided. In the experimental part growth characteristics of A. pullulans (the strain CCM 8182 was used) and pullulan production during growth in optimal conditions was analyzed. Biomass production was the highest with fructose as a carbon source (3,580 g/l CCM 8182), the highest pullulan production occurred when using sucrose as a carbon source (10,300 g/l F 148). Among three organic solvents used for pullulan precipitation – ethanol, acetone, isopropylalcohol, ethanol was selected as the best for further experiments in ratio 1:2 (fermentation broth:ethanol). Pullulan purity was characterized by HPLC. As a further part of this work, cryoprotectant properties of pullulan at temperatures – 72° C, -18° C, 4° C and 60°C were studied. The presence of pullulan at temperatures – 72° C and 60° C was found to be detrimental to cell viability. At temperatures – 18° C and 4° C the cryoptotectant activity of the polysaccharide was confirmed.
|
|
|
Bioproduction, Characterization and Application of Selected Biopolymers
Benešová, Pavla ; Pekař, Miloslav (referee) ; Čertík, Milan (referee) ; Márová, Ivana (advisor)
Proposed doctoral thesis deals with microbial production of biopolymers (polysaccharides and polyesters) using renewableble inexpensive resources as carbon and nitrogen source. At first, production of extracellular metabolites, mainly pullulan and poly-L-malic acid, by polymorphic microorganism Aureobasisium pullulans was studied. Further part of thesis was focused on production of bacterial biopolyesters polyhydroxyalkanoates (PHA). PHA are produced in the form of intracellular granules by various bacteria species. During the study of PHA production, sythesis of poly(3-hydroxybutyrate) and technologically significant copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was investigated as well with regard to waste substrate utilization in biorafinery concept. Spent coffee ground seemed to be applicable waste in biorefinery proces. One of the coffee wastes used for PHA production was spent coffee ground hydrolysate which was converted to PHA by Burkholderia cepacia. Moreover, copolymer of 3HB and 3HV was accumulated when SCGH was used as a sole carbon source, no precursor had to be added. Another coffee waste, which was utillized by Cupriavidus necator H16, is represented by oil extracted from spent coffee grounds. Hydrolysis proces of waste substrates had to be optimized, to reach the highest possible saccharide concentration. Due to the hydrolysis process several toxic compounds can be formed, hence, influence of hydrolysis procesings on polyphenols content in hydrolysates was monitored. Waste substrates were also tested as potentional complex nitrogen source for PHA production. Hydrolysates of cheese whey and chicken feather were used as inexpensive complex nitrogen source for PHA production by C. necator, when waste frying oil was used as a carbon substrate. The finnal part of the thesis is dealing with possibilities how the PHA can be processed into atractive aplication forms. Liposomes with partial content of PHB had been prepared, moreover, for improving of antioxidant activity and antimicrobial effect the waste coffee oil was added. Micro-fibrous PHB materials were prepared for the purposes of water filtration. Higher filtration effectivity was observed when composite PHB fibrous material containing active charcoal or metal oxides was used. Important part of thesis is represented by study of degradation processes of prepared PHA-based aplication forms. Various microorganisms were tested on PHA depolymerases production. Biodegradability of PHA materials was tested in of composting conditions by standard composting test IS/ISO 20200. Changes in mechanical properties of polyurethan, where polyol was partialy replaced by PHB, were tested depending on the exposure of composting condition.
|
|
|
Raman spectroscopy as a tool for analysis of biotechnologically relevant microorganisms
Záhorská, Linda ; Enev, Vojtěch (referee) ; Mgr.Ota Samek, Ph.D. (advisor)
The diploma thesis deals with the study of biotechnologically significant microorganisms, using the Raman spectroscopy. Content of the theoretical part is brief characteristic of Raman spectroscopy as a method, its use in practice and also use as a tool for monitoring of biotechnologically processes. Thesis was further focus on the biotechnologically significant microorganism Aureobasidium pullulans, its use in biotechnology and also for over-produced substances and in particular poly-L-maleic acid and pullulan. The content of the experimental part was study of selected strains A. pullulans, specifically stains as DSMZ, CCM F148 and CCM 8182, using Raman spectroscopy on the various types of culture media. Subject of practical part research was too production of extracellular polymers, acid poly-L-apple and pullulan, by selected strains A. pullulans. Objective of my thesis was described and determinate, spectra of individual strains as well as extracellular products, mainly pullulan, and then choose suitable production medium and optimal production strain A. pullulans. During experimental work was found, that optimal production strain was DSMZ strain culture on the mineral medium with the addition of yeast autolysate, which was optimal medium type. The content of the pullulan produced was for gravimetric determination, 6,3g/L, which also confirmed the results of the HPLC method. It was experimentally found, that Raman spectroscopy isn´t suitable method for quantification of extracellular products, but is appropriate and was used for PCA analysis of individual strains.
|
|
|
Bioproduction, Characterization and Application of Selected Biopolymers
Benešová, Pavla ; Pekař, Miloslav (referee) ; Čertík, Milan (referee) ; Márová, Ivana (advisor)
Proposed doctoral thesis deals with microbial production of biopolymers (polysaccharides and polyesters) using renewableble inexpensive resources as carbon and nitrogen source. At first, production of extracellular metabolites, mainly pullulan and poly-L-malic acid, by polymorphic microorganism Aureobasisium pullulans was studied. Further part of thesis was focused on production of bacterial biopolyesters polyhydroxyalkanoates (PHA). PHA are produced in the form of intracellular granules by various bacteria species. During the study of PHA production, sythesis of poly(3-hydroxybutyrate) and technologically significant copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was investigated as well with regard to waste substrate utilization in biorafinery concept. Spent coffee ground seemed to be applicable waste in biorefinery proces. One of the coffee wastes used for PHA production was spent coffee ground hydrolysate which was converted to PHA by Burkholderia cepacia. Moreover, copolymer of 3HB and 3HV was accumulated when SCGH was used as a sole carbon source, no precursor had to be added. Another coffee waste, which was utillized by Cupriavidus necator H16, is represented by oil extracted from spent coffee grounds. Hydrolysis proces of waste substrates had to be optimized, to reach the highest possible saccharide concentration. Due to the hydrolysis process several toxic compounds can be formed, hence, influence of hydrolysis procesings on polyphenols content in hydrolysates was monitored. Waste substrates were also tested as potentional complex nitrogen source for PHA production. Hydrolysates of cheese whey and chicken feather were used as inexpensive complex nitrogen source for PHA production by C. necator, when waste frying oil was used as a carbon substrate. The finnal part of the thesis is dealing with possibilities how the PHA can be processed into atractive aplication forms. Liposomes with partial content of PHB had been prepared, moreover, for improving of antioxidant activity and antimicrobial effect the waste coffee oil was added. Micro-fibrous PHB materials were prepared for the purposes of water filtration. Higher filtration effectivity was observed when composite PHB fibrous material containing active charcoal or metal oxides was used. Important part of thesis is represented by study of degradation processes of prepared PHA-based aplication forms. Various microorganisms were tested on PHA depolymerases production. Biodegradability of PHA materials was tested in of composting conditions by standard composting test IS/ISO 20200. Changes in mechanical properties of polyurethan, where polyol was partialy replaced by PHB, were tested depending on the exposure of composting condition.
|
|
|
Production of extracellular polymeric substances by Aureobasidium pullulans
Horáček, Pavel ; Breierová, Emília (referee) ; Márová, Ivana (advisor)
The diploma thesis is focused on the study of the influence of cultivation conditions and arrangement for the production of extracellular polymeric substances by using yeast-like microorganism Aureobasidium pullulans. In the theoretical part a brief description of A. pullulans, its use in biotechnology and produced exobiopolymers, especially pullulan and poly-L-malic acid are presented. The first aim of the experimental part was to set the most appropriate cultivation conditions for A. pullulans CCM 8182. Growth and production properties in optimum conditions were compared with cultivation on waste substrates - oat bran, buckwheat husks, apple fiber and others. Waste substrates can be used as cheap nutrient sources which enable reducing cost of potential biotechnological production. As a further part of this work, optimization of HPLC/RI method for analysis of exobiopolymers has been done. Optimal mobile phase composition and chromatography conditions were proposed. Column Roa organic acid H+ was the most suitable for simultaneous separartion of glucose and malic acid. Before HPLC analysis hydrolysis of polymers was done. Sulphuric acid (5 mmol/L) was used as a mobile phase at flow rate 0.5 mL/min and temperature 60 °C. The highest production of pullulan occurred using oat bran as a substarate (13.03 g/L) at an initial pH 7.5. Maximum production of poly-L-malic acid was observed during the cultivation on apple peels (2.89 g/L) at pH 6. It was found that the higher production of poly-L-malic acid occurred at pH 6, while higher production of pullulan was at pH 7.5.
|
|
|
Microbial production of extracellular polymers and their involvement in stress response
Müllerová, Lucie ; Sedláček, Petr (referee) ; Obruča, Stanislav (advisor)
Bachelor’s thesis is focused on the production of extracellular polysaccharide pullulan by microorganism Aureobasidium pullulans, purification of pullulan and its possible use as a cryoprotectant. As a part of this work a description of A. pullulans, pullulan and an overview of involvement in its stress response were provided. In the experimental part growth characteristics of A. pullulans (the strain CCM 8182 was used) and pullulan production during growth in optimal conditions was analyzed. Biomass production was the highest with fructose as a carbon source (3,580 g/l CCM 8182), the highest pullulan production occurred when using sucrose as a carbon source (10,300 g/l F 148). Among three organic solvents used for pullulan precipitation – ethanol, acetone, isopropylalcohol, ethanol was selected as the best for further experiments in ratio 1:2 (fermentation broth:ethanol). Pullulan purity was characterized by HPLC. As a further part of this work, cryoprotectant properties of pullulan at temperatures – 72° C, -18° C, 4° C and 60°C were studied. The presence of pullulan at temperatures – 72° C and 60° C was found to be detrimental to cell viability. At temperatures – 18° C and 4° C the cryoptotectant activity of the polysaccharide was confirmed.
|
|
|
Controlled prodution of pullulan by yeast-like organism Aureobasidium pulluans
Skoumalová, Petra ; Obruča, Stanislav (referee) ; Márová, Ivana (advisor)
Bachelor's thesis is focused on study of influence of exogenous stress factors on biomass and pullulan production by microorganism Aureobasidium pullulans. As a part of this work an overview of stress factors, pullulan producers, its structure, function and technological use was introduced. In the experimental part growth characteristics of Aureobasidium pullulans and pullulan production during growth in optimum conditions and under stress were analyzed. The reduced availability of oxygen resulted in a decrease of biomass production accompanied by increased pullulan production. Chemical stress induced by NaCl significantly affected mainly biomass production. The highest production of pullulan was found at 15 g / l of NaCl. Ethanol stress exhibited growth inhibition and at higher concentration also lack of pullulan production. Peroxid stress exhibited no effect on pullulan production. Short-time exposure to low heavy metal concentration (Se(IV), Cr(III)) influenced pullulan production more positively than long-term effect.
|
guest ::
