|
|
Automation of the calibration process
Mařas, Michael ; Šedivá, Soňa (referee) ; Beneš, Petr (advisor)
This master thesis deals with the automation of the calibration process at the workplace for calibration of electronic power meters and the description of the method of evaluation of calibration results. The paper analyses the calibration workstation and the manual method of calibration performed by the calibration laboratory staff. Furthermore, proposals for automating the manual method of calibration and a description of the implementation of a program for automating this process are given. Subsequently, the uncertainty analysis is described in the paper. In this section, the uncertainty analysis according to the GUM method and the subsequent calculation of these uncertainties are presented. The correctness of the calculation of uncertainties according to the GUM method is verified by the Monte Carlo method. In the last part of the work, the method of evaluation of the calibration results according to ILAC-G8:09/2019 is described and the form of the calibration protocol is described.
|
|
|
Implementation of a Multipurpose Measurement System for (Sub)Terahertz Electron Spin Resonance Spectroscopy
Šedivý, Matúš ; Malik, Aamir Saeed (referee) ; Epel, Boris (referee) ; Vrba, Radimír (advisor)
Spektroskopie elektronové spinové rezonance (také nazývaná elektronová paramagnetická rezonance nebo jen EPR) zahrnuje metody, které zkoumají hmotu prostřednictvím nepárových elektronů. Jednou z progresivních metod EPR je rychlé skenování, které umožňuje pozorovat kinetiku chemických reakcí. Kromě toho nedávný vývoj vysokofrekvenčních součástkách rozšířil použití vysokofrekvenční EPR (HFEPR), které využívají sub-terahertzové až terahertzové vlny. Tato práce se zabývá propojením obou cest do HFEPR spektrometru s rychlým skenováním frekvencí (FRaScan), který byl nedávno vyvinut na CEITEC VUT. Na začátku je stručně uvedena základní teorie k EPR, následovaný přehledem přístrojového vybavení pro HFEPR. V praktické části je popsáno technické řešení spektrometru. Důraz je kladen na implementaci softwaru, pomocí kterého je spektrometr ovládán a měření jsou automatizována. Následně jsou ukázány příklady z měření pevných látek, konkrétně karbidu křemíku dopovaného vanadem (SiC:V), ftalocyaninu líthia (LiPc) a krystalu 1,3-bisdifenylen-2-fenylallylu (BDPA). Příklady demonstrují schopnosti spektrometru získat multifrekvenční vlnově spojitá EPR spektra a frekvenčně rozmítaná spektra v závislosti na teplotě a orientaci vzorku, a taky spektra pomocí rychlého skenování frekvencí
|
|
|
Experimental Hardware Musical Instrument
Chaňo, Petr ; Vrba, Kamil (referee) ; Dlouhý, Dan (advisor)
The main aim of the bachelor thesis was to design and build a musical instrument that will have a signs of the experimentalism consist of combination synthesizer and sequencer, tuning, unusual kind of controls and its look. At the top of this work is the theoretical introduction to the musical instruments and to the process of generating and modulating sound. There is also written information about parts that the instrument consists of (microcontroller, D/A converter), principles that leads to being able to create this instrument (operational amplifiers, frequency filters, DDS) in the theoretical part. The description of the components is in the practical part followed by the information about the circuits at this instrument and about software solution as well.
|
|
|
Technology cutting external thread
Dlouhý, Michal ; Kalivoda, Milan (referee) ; Prokop, Jaroslav (advisor)
This bachelor thesis is concerned with cutting metods of an external thread. The aim of this bachelor thesis is to described technological conditions and parameters of an external thread. Firsty, there are basic cutting methods described. Secondary, in particular cutting instruments are characterized. In the conclusion the particular cutting conditions are explained.
|
|
| |
|
| |
|
|
Production of the cover
Dymák, Petr ; Císařová, Michaela (referee) ; Podaný, Kamil (advisor)
The cover is a component used to cover the motor bearing. A material, used for its production, is steel 11 320. Of the possible technologies was selected as the most suitable for production the method of conventional campaign without wall thinning. For production of the cover has been calculated the blank diameter of 477 mm, which is made of a metal sheet with the dimensions 1 x 3000 x 1500 mm. Literary study is focused on the analysis of the technology. Semi-finished product of cover component will be cut in sheet measuring 1 x 1500 x 3000 mm. For forming of the component will be used hydraulic double-acting press CTH 250 from company ŽĎAS a.s. After the economic evaluation was determined price of one part to amount of 62 CZK in series of 100 000 pieces/year.
|
|
|
Electroacoustic Hardware Musical Instrument - Sampler with Unusual Controlers
Dudáš, Martin ; Indrák, Michal (referee) ; Dlouhý, Dan (advisor)
This bachelor thesis describes the design and implementation of an electroacoustic hardware instrument with unusual controls. The experimentalism of the instrument consist of, for example, parameter control based on surrounding light or parameter control by hand movement. The main part of the instrument is the Arduino development board, which controls the Sunvox modular synthesizer on the Raspberry Pi microcomputer. Communication between the Arduino and the synthesizer takes place via MIDI messages. The software part is programmed in the Arduino IDE development environment in C++.
|
|
|
Low power current transformers
Zolich, Ladislav ; Hrabčík,, Miroslav (referee) ; Dostál, Lukáš (advisor)
Master‘s thesis is focused on current instrument transformers, current sensors and low power current transformers. Discussion is made on advantages and disadvantages of each measuring principle. Low power current transformers is then designed and manufactured. Manufactured LPCT is then measured for accuracy class. Results are then compared.
|
|
| |
guest ::
