|
|
Multifunctional apartment building
Raimundová, Kateřina ; Bochníček, Vojtěch (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is the development of a project for the realization of a multifunctional residential building in Třemošnice. It is a five-storey building with one underground and four above-ground floors. It is a detached building set in gently sloping terrain. The underground level is used as a mass garage and there are bicycle storage room and the building´s technical facilities. The first three floors fulfil the function for housing and there are a total of 10 housing units (1x1+kk, 3x2+kk, 4x3+kk, 2x4+kk). The fourth floor has a café with an outdoor terrace. Vertical supporting structures in the above-ground floors are made of Porotherm ceramic blocks, the underground part has supporting walls and columns of reinforced concrete. Horizontal supporting structures consist of reinforced concrete monolithic plates. The foundation is a foundation board, only the base strips are designed at the door. The roofing of the building is designed as a flat vegetation extensive roof. The terrace in the 4NP is also designed as a single-sheathed flat roof with a layer of wood-plastic planks. The whole object is insulated with the contact insulation system ETICS. The design also includes thermal engineering assessment, acoustic assessment, sun assessment and fire safety solution.
|
|
|
Apartment building
Teplý, Jan ; Hrabovský, Kristián (referee) ; Brukner, Bohuslav (advisor)
Bachelor thesis is about apartment building that is being built in sloping terrain. The building has 3 floors above ground and 1 floor underground. In total building has 12 residential units. Access to the apartment building is barrier-free so is one residential unit. Building has underground parking garage and outside parking aswell. The building is structurally made of monolithic reinforced concrete frames. The infill masonry consists of ceramic blocks. The foundation structure is reinforced concrete slab. The substructure of the building is isolated with asphalt sheets. The building has flat roof. Apartment building is insolated with external ETICS system. The building is designed as nearly zero energy building.
|
|
|
Apartment building
Urbaníková, Lea ; Surý, Tomáš (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor thesis is to develop project documentation for the construction of a new apartment building with nearly zero energy consumption. The new building is proposed in the Ponava locality, near the center of Brno. The proposed residential building has four above-ground floors and is fully basemented. The design includes three different layouts of residential units to ensure variability and functionality for different groups of residents. The building is equipped with an elevator. The basement contains a communal garage with sixteen parking spaces and storage rooms (cellars), which are integrated with the parking spaces. Each residential unit has an allocated parking space and a storage room. In total, the residential section comprises twenty-one residential units, most of which have a terrace, loggia, or balcony. The residential building is founded on a base slab. The structural system of the building combines monolithic reinforced concrete elements. The basement consists of reinforced concrete load-bearing walls, internal columns, and reinforced concrete internal walls in the stairwell area. On the above-ground floors, within the perimeter wall of the stairwell recess, a reinforced concrete wall with continuous openings is designed. The remaining parts of the above-ground floors are composed of a skeleton structural system with reinforced concrete two-way beams and infill masonry. The ceiling structure consists of monolithic reinforced concrete slabs. The building is roofed with a single-layer flat roof with a membrane waterproofing. The facade of the building is designed with a ventilated air gap. The cladding consists of brick cladding panels mounted on an aluminium support frame.
|
|
|
Apartment building
Srba, Vojtěch ; Bergmann, Ivan (referee) ; Brukner, Bohuslav (advisor)
The bachelor’s thesis deals with the preparation of project documentation for the construction of a new apartment building in Blansko. The standalone object in flat terrain has four above-ground floors with the last one receding and one underground floor. The underground floor is designed with parking spaces, storage boxes, technical facilities, and waste facilities. All above-ground floors are designated for living, where there are a total of 23 residential units. The first above-ground floor has 6 residential units (including one residential unit for people with limited mobility and orientation), the second and third floors have 7 residential units, and the fourth floor has 3 residential units. The residential units are designed in the form of 1+kk to 3+kk. Access to the residential units is from the main corridor, which leads to the vertical communication core, which has an elevator and a two-arm staircase. The structural system of the building is designed as a transverse wall. The building is based on reinforced concrete piles. The ceilings are made of monolithic reinforced concrete slabs. The roofing of individual parts of the building is designed with flat single-shell roofs, where the roof over the 1st floor and terraces are walkable and the roof over the 4th floor is designed as a membrane with a covering of softened PVC. The bachelor’s thesis includes project documentation for the construction.
|
|
|
Residential building
Bednár, Zdenko ; Vlach, František (referee) ; Vajkay, František (advisor)
This bachelor thesis is focused on the development of project documentation for the construction of a residential building with nearly zero energy consumption. The aim of the work was to design the building disposition with an appropriately chosen structural and material solution. The residential building is designed on a plot of land located in the northern part of the city of Brno, in the borough Líšeň. The plot of land is characterized by its slightly sloping terrain. The residential building is a free standing building with a rectangular floor plan. The building has 5 floors, where one floor is a collective garage with technical equipment and the other four above-ground floors contain residential units with storage spaces. The above-ground floors consist of a total of nineteen residential units. Parking places with a total of 32, are located in the collective garage and in front of the building. The structural system of the building is designed as a transverse skeleton, supplemented by a wall system on the above-ground floors. The perimeter walls are made of acoustic lime-sand blocks, which are supplemented with mineral wool. The building will be roofed with a single layer green flat roof with extensive greenery. The appearance of the building will be formed by a neutral white plaster, which will be supplemented by anthracite plaster elements in the balcony area. The appearance of the building will be complemented by anthracite window frames, doors and tinkering products. As part of the work, assessments of heating technology, acoustics, lighting and fire safety were carried out. All requirements set by the standard were met.
|
|
|
Apartment building
Lužná, Hana ; Lavický, Miloš (referee) ; Matějka, Libor (advisor)
The subject of the bachelor thesis is the preparation of project documentation for the new construction of an apartment building in Prostějov. The building has four above-ground and one underground floors. The terrain around the building is slightly sloping. There are a total of nine apartments in the above-ground units ranging in size from 1+kk to 5+kk. On the first above-ground floor, a wheelhouse, a carriage room, a cleaning room, a technical room and an air conditioning machine room are designed. There are also designed cellar cubicles for individual apartments. On the first underground floor, a collective garage with parking for eight cars. Wall construction system. Support structures made of Porotherm blocks. The ceilings are made of reinforced concrete monolithic ceiling slabs. The roof is designed as a flat vegetation roof. The building is based on foundation strips made of simple concrete. Columns designed reinforced concrete footings.
|
|
|
Apartment building
Kyselák, Jan ; Lavický, Miloš (referee) ; Matějka, Libor (advisor)
The subject of the bachelor's thesis is the project documentation for the construction of an apartment building with nearly zero energy consumption. The plot is in the eastern part of the town of Třebíč, in a partially built-up area. The terrain slopes towards the southern side of the plot. The building is situated in the southeastern part of this plot. It is a standalone brick apartment building, topped with a flat roof covered with PVC-P membrane waterproofing. The building consists of two main rectangular blocks placed side by side, with their longer sides parallel to the local service road (Modřínová Street). A third smaller block forms the entrance to the roof. The building also features balconies on three sides. The apartment building has one underground floor and four above-ground floors, containing a total of 15 residential units. The underground floor includes a communal garage for 5 vehicles, utility facilities, and storage spaces. Additional storage spaces are located on the first above-ground floor, which also houses the main entrance to the building. The vertical structures are designed using the Porotherm system. The basement perimeter walls, and ceiling structures are made of monolithic concrete. The staircase is prefabricated with Schöck elements for impact sound insulation. The building has been assessed for fire safety and building physics.
|
|
|
Apartment building
Zlatník, Petr ; Vacenovská, Veronika (referee) ; Brukner, Bohuslav (advisor)
The bachelor's thesis deals with the elaboration of joint documentation of a detached apartment building. The building contains 10 residential units of various sizes, number of living rooms and arrangements, with facilities (common areas, parking spaces, cellars, etc.). It is rectangular in shape (1st floor and 2nd floor), in the 1st floor supplemented by a rectangular extension of the collective garage. It is covered by a combination of saddle roofs with a hip
|
|
|
The building
Kříž, Lukáš ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The subject of the diploma thesis is to prepare project documentation for the construction of a multifunctional building with almost zero energy consumption. The multifunctional building is located in the South Moravian Region on the outskirts of Rosice. It is a five-storey detached multifunctional building in a slightly sloping terrain, with one underground floor and four above-ground floors. The underground floor serves for the most part as a collective garage and also for the technical background of the building. There is a gym and showroom on the first floor. On the second and third floors there are office spaces with the necessary facilities. The remaining fourth floors are used for living, there are designed four residential units, with storage space for each apartment. The building is designed as a combined construction system, while the perimeter vertical load-bearing structures are lined with ceramic hollow blocks. The perimeter load-bearing walls in the basement are made of lost formwork. The vertical load-bearing structures inside the building consist mainly of reinforced concrete monolithic columns. The ceiling structures and longitudinal girders are also monolithic reinforced concrete. The perimeter masonry is insulated with the ETICS contact thermal insulation system. The building is based on reinforced concrete monolithic foundation strips. The roof consists of a flat single-skin vegetation roof.
|
|
|
Multifunctional building
Starý, Martin ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This master’s thesis focuses on the preparation of project documentation for construction part of a multifunction building. This buildig has a five floors, the first one is a underground and four of them are above grand. The building is located in part of Prague – Dolní Chabry. Building has a rectangle shape which isin the midle shifted and makes two similar section. Each sectin has own main entry, stairs and lifts. Orientation the longer facades of the multipurpose house are facing to south and north in the longer asis. Garage for resident is located in the lowest floor. In the first floor above ground is commercial part of the house, six commercial spaces. In the rest of the floors are located 26 apartments. Vertical structure are made of the Porother systém and Best systém, celings are meda from prefaricated reinforced concrete panels. Structure of the roof is solid by single skin flat roof.
|
guest ::
