National Repository of Grey Literature 102 records found  beginprevious90 - 99next  jump to record: Search took 0.00 seconds. 
Design of a space heating system with a heat pump air-water and solid fuel source for heating the family house
Španihelová, Kateřina ; Elcner, Jakub (referee) ; Katolický, Jaroslav (advisor)
The aim of this thesis is to design the heating system for the house, including the design and calculating the required quantity of heat for hot water. The specified heat sources are the heat pump air to water and solid fuel boiler. The task was to design the heating system to the fastest possible return on investment. The initial investment in a heat pump is high so it is necessary to design the heating system as efficiently as possible. The thesis contains a complete project of calculating heat loss of the building, the design of heating surfaces and their heat-technical calculation. There is included the design of the pipe system, the calculation of pressure loss and its regulation. The thesis also includes design of safety equipment, temperature regulation and drawings. On the basis of calculated data was processed economic assessment, which determines the return on investment to the heat pump. Compared to the gas condensing boiler the return on investment will ideally be after five years.
Operation check of dredge pump
Pleban, Jakub ; Fiedler, Jan (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is to consider the operation of dredge pump and design new technology of slag removal including return on investment calculation. The operation optimization itself was preceded by analysis of present technology, data collection, calculation of pressure losses and pinpointing the causes of their origin. Subsequently, the measures to elimination of losses were deduced and these measures were implemented into optimization of dredge pump operation itself. The return on investment into the new technology of slag removal is calculated in the last chapter, considering its feasibility in the heating plant.
Evaluation of the alternatives of PCDD/F removing in the incineration plants
Frýba, Lukáš ; Kropáč, Jiří (referee) ; Bébar, Ladislav (advisor)
The thesis is focused on analyzing the current status of the technology used for cleaning flue gas from persistent organic pollutants, especially PCDD/F. For the three most commonly used methods of solution operational and energy efficiency comparison was made, where achievable energy export and the impact of the change in working conditions on the efficiency indicators of energy production and use of the energy was evaluated. In conditions we considered an alternative machine-technological solutions used for the final disposal of persistent organic pollutants resulting from the waste combustion in terms of additional operating costs and energy efficiency.
Sludge Pumping on WWTP
Fadrný, Tomáš ; Medek, Jaroslav (referee) ; Boráň, Jaroslav (advisor)
This diploma thesis deals with the best solution design for a sludge fitting, especially focusing on the right choice of pumps for the waste water treatment plant in Prostějov. The pumps were selected for a circulation pipeline, which heats up the sludge. Several measurements were carried out in order to determine the statistical evaluation of the properties of the pumped medium. The figures gained were used to calculate pressure losses.The diploma thesis is divided into two parts. The first part provides a theoretical analysis of the problem and the second part presents the results and subsequently the reasoning for the new selection of pumps in order to change the WWTP technology from the mesophilic to the thermophilic sludge digestion. The test records describing the testing of the individual samples of the pumped sludge are attached.
CFD geometry optimalisation of heat exchanger
Stromský, Ondřej ; Gottvald, Jakub (referee) ; Nekvasil, Richard (advisor)
The main task of thesis is to find optimum geometry of the heat exchanger. The biggest emphases is placed to finding the most optimum of streaming liquid in the heat exchanger and to minimisation pressure losses. There is a effort to regulate the streaming liquids in heat exchangers so that in multitube and on the shell side don´t create dead areas, it means to avoid sedimentation of particle in these places. Dead areas cause rising resistance against heat transfer and necessity of frequently cleaning the heat exchanger. For these reasons is necessary to do analyse of flowing and to looking for the optimal geometry of the heat exchanger.
Hydrodynamic analysis of basic equipment in units for the thermal processing of wastes
Říha, Kamil ; Kilkovský, Bohuslav (referee) ; Pařízek, Tomáš (advisor)
Thermal processing of wastes is a metod, when during combustion occur reduction of wastes till 10% previous volume. The main advantage of this method is possibility to heat utilization for heat and electric production. Through thermic process develops range of pollutants (NOx, CO, SO2, HCl, HF, PCDD/F) that had to be remove from off-gas or reduced to enviromental values in agreement with laws in force [16]. For this purpose are combustion units equip with range of devices for removing this pollutans. The main task of this diploma thesis is selectoin of ctirical device in term of pressure drops. The value of pressure drop stands significant part in proposition of efficiecy off-gas fan. In increase or decrease total pressure drop consumption of electrical energy of off-gas fan is rising or going down. Change of consumption in total classification is projecting in energy utilization rate of waste where is determinate if it stands of energy utilizatoin or just incineration. In first part of diploma thesis are described in detail availability methods of off-gas cleaning where is described their principle, advanteges, disadvatages and comparison of effectivity. In second part of diploma thesis is made example model about influnce technology on value of total pressure drop. There were chosen two technologies for removing dioxins (technology of catalytic filtration REMEDIA and DeNox/DeDiox). For both technologies were made detailed analysis of pressure drops single components of these technologies. Attainment results were compared and rated with one another. For analysis these two methods were designed mathematical process in software Maple 9.5.
Steam boiler for fytomass
Rotrekl, Jan ; Ing.Pavel Křemínský (referee) ; Skála, Zdeněk (advisor)
This diploma thesis deals with a design of a boiler for stillage combustion. Stoichiometric calculations and enthalpies of combustion gases have been calculated from the specified parameters. In addition, heat calculation, design of the combustion chamber dimensions and dimensioning of heat surfaces were accomplished. The boiler has an evaporator with natural circulation and a fire grate.
Fluid power heating system
Paták, Jiří ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The theoretical part deal with problematic of fluid power heating system. The experimental part deal with measurement of the characteristic of circulation pump and measurement of valves - ball valve. The project solves the heating and hot water preparing for the new administrative building in Žďár nad Sázavou. The building has 3 floors. As a source of heat for the winter season is designed gas boiler, for hot water preparing is also used the same gas boiler. The heat source is placed in a separately accessible room.
Analysis of Flow Distribution in Systems with Dense Tube Bundles
Babička Fialová, Dominika ; Dohnal, Miloslav (referee) ; Turek, Vojtěch (advisor)
Considering heat transfer equipment with dense tube bundles, it is essential to ensure as uniform a fluid distribution into the tubes as possible in order to prevent various operating problems. This bachelor’s thesis therefore focuses on tube-side flow analysis in such equipment. CFD simulations were carried out using a diverse set of flow systems with outflow into a constant-pressure environment. The respective tube bundle geometries differed in densities and sizes, arrangements of the tubes, and tube diameters. Air was used as the working fluid in the majority of the cases, however, some of the simulations were also carried out with water. Data obtained from evaluations in the fluid flow modelling software ANSYS Fluent were further analysed and the influence of the mentioned differentiating parameters on flow distribution non-uniformity and pressure drop was investigated. According to the regression model, the dependence of flow distribution non-uniformity on density and size of the bundle and on mass flow rate per unit outflow area cannot be rejected with the standard significance level. As for pressure drop, the only parameter that was not rejected was mass flow rate per unit outflow area.
Heat exchanger design
Loukota, Martin ; Lisý, Martin (referee) ; Baláš, Marek (advisor)
This bachelor thesis deals with design of tube heat exchanger for preheat the return water to the boiler. Thesis contains description, distribution and requirements of the tube heat exchangers, stoichiometric calculation, geometrical dimensions design, pressure loss and thermal performance calculation. Thesis also includes drawings of the designed exchanger.

National Repository of Grey Literature : 102 records found   beginprevious90 - 99next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.