|
|
Fuselage design of TL-4000 aircraft
Holiš, Michal ; Jebáček, Ivo (referee) ; Mališ, Michal (advisor)
Táto diplomová práca sa zaoberá návrhom kompozitového trupu štvormiestneho jednomotorového turistického letúnu TL-4000, ktorý spadá do kategórie CS-23 zo zameraním sa na zadnú časť. V tejto práci je vypracovaný návrh vnútornej konštrukcie s ohľadom na posádku a pasažierov. Z navrhnutej konštrukcie je vytvorený MKP model po ktorom nasleduje vypracovanie a vyhodnotenie skladby laminátových a sendvičových častí nosnej konštrukcie pomocou softvérov MSC.Patran/Nastran a ComPost pre vypočítané kombinácie vzdušného zaťaženia.
|
|
|
Fuselage and control system design of VUT 081 Kondor
Kalný, Jan ; Šplíchal, Jan (referee) ; Mališ, Michal (advisor)
This master’s thesis deals with VUT 081 Kondor composite fuselage design and control system layout design. Load computation and selection of critical load cases are made. Principal inner surfaces of the fuselage are designed with respect to basic ergonomic requirements of the crew. Construction materials are chosen and a layup of composite materials is performed. Fuselage FEM model is made in MSC Patran/Nastran system and the structure-strength analysis is given for chosen load cases.
|
|
|
Monitoring the durability of FRP composite materials
Janák, Petr ; Prokeš,, Jan (referee) ; Bodnárová, Lenka (advisor)
This diploma thesis deals with evaluation of the conditions for laboratory testing of composite profiles with fiber-reinforced polymer (FRP). Theoretical part describes the main material properties of FRP profiles and method of manufacturing by pultrusion. Experimental part evaluates imposition of the test samples in alkaline environment and their subsequent changes in physical properties. Next part contains evaluation of cuts FRP profiles by electron microscopy in combination with element analysis. The outcome of this work is the method of evaluation of accelerated durability FRP profiles.
|
|
|
Dielectric absorption of varnish composites
Reňák, Ladislav ; Frk, Martin (referee) ; Rozsívalová, Zdenka (advisor)
This work deals with issues of electro insulating varnishes and composite materiále within the frame of dielectric changes depending on a change of relative humidity where these varnishes are located. For this purpose had been created variety of a samples of electroinsulating varnish with different percentage of filling with mica. The general aim is acquire information about dielectric changes of examined electro insulating varnishes that are exposed to atmospheric influence.
|
|
|
Study of electric properties of composite
Macháček, Miroslav ; Havlíček, Svatopluk (referee) ; Polsterová, Helena (advisor)
This work deals with issues of composite materials. The general aim is to observe how the amout of filling infuence dielectric spectrum which is measured on prepared samples. For this purpose had been created variety of a samples with different percentage of filling with mica. Measured values had been compared with theoretically values, determinated using mixture formulas.
|
|
| |
|
| |
|
|
Short fiber reinforced composites in dental applications
Matysová, Dorota ; Vladimír, Pavelka (referee) ; Poláček, Petr (advisor)
This diploma thesis deals with short-fibre reinforced composites for dental applications. Particulate barium filler, short polyacrylonitryle fibres or short glass fibres were added to the dimethacrylate matrix to study their effect on the composite material properties. Methods used for this study were thermogravimetric analysis (TGA), differential compensation photocalorimetry (DPC), dynamic mechanical analysis (DMA), three point bending, scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). The matrix curing was defined by heat of polymerisation, degree of conversion and polymerisation rate. Composite materials were characterized by the glass transition temperature, storage moduli at 35 °C and 100 °C, elastic modulus, strength, the critical value of stress intensity factor and the critical value of energy release rate. Fracture surface investigation is also included in this thesis.
|
|
|
Properties of pultruded composites based on epoxy matrix
Huljak, Pavel ; Bálková, Radka (referee) ; Přikryl, Radek (advisor)
The theoretical part of this bachelor thesis deals with research of composite materials, especially based on polymer epoxy and polyester resins, using as reinforcement a glass fiber bundles. The practical section includes the production of composite materials and their components along with the most important testing methods. The main goal of the experimental part is to characterize the optimal conditions pultrusion production of epoxy composite material. Another point is characterization of mechanical and chemical properties of the produced composite at a number of test methods. Finally the optimized epoxy composite materials are compared with composites based on polyester resins.
|
|
|
Mechanical and structural characteristics of magnesium alloys reinforced with ceramic fibers
Halmazňa, Jiří ; Moravčík, Igor (referee) ; Zapletal, Josef (advisor)
This bachelor thesis deals the study of the mechanical properties of the alloy QE22 reinforced with SiC particles and Saffil fibers. This composite was produced by infiltration particles shape of the preform with molten matrix under high pressure. Test specimens prepared from the composite and the matrix were subjected to a tension strength test and compression test. The test results show pronounced asymmetry behavior in tension and compression of the matrix and composite. Adding the reinforcement into base material leads to significant increase of elastic modul, breaking strength and yield strength while reducing plastic properties. At the end of work was the behavior of the composite compared with the theoretical composite models.
|
guest ::
