|
|
On the increase of cutting performance of thread cutting taps with coatings
Světlíková, Jitka ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
This bachelor thesis deals with the process of cutting, the wear of cutting tools and the fact, that coating makes tools more durable and increases cutting power. The goal of the experimental part is to determine, compare and evaluate cutting features in the process of thread cutting with taps of different coatings. For the experiment invariable cutting conditions were chosen, the only variable is the type of used coating. The result of the experiment is the measurement of cutting torque dependent on time and the grade of the wear of cutting tools.
|
|
|
On the modern surface treatment of pressure casting dies
Černý, Štěpán ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
Bachelor thesis is focused on the influence of surface treatments due to prolonging life and decreasing an amount of service hours on the die casting molds of aluminium alloys. Theoretical analysis of the problem deals with the requirements for tools materials used for making these moulds. Furthermore it deals with the materials which are most commonly used in their production and the species of aluminium alloys which are most commonly casted. The second part of this thesis, which is discussed in detail, deals with design solution regarding to usage of surface finishes on the moulds for die casting and their specific properties. Another part of this thesis contains experimental tests where was measured selected coating in order to determine its behaviour during the casting cycles with a focus on increasing lifetime of the mould insert, also reducing the amount of glued metal on the walls and finally improving the surface of casted part. It was found, according the analysis results, that the TiAlN coating helped to reduce the amount of glued metal on the mould walls. This also helped to reduce the amount of service intervals. On the other side for achieving much better results is better to use TiB2 coating. It has been experimentally confirmed that the TiAlN coating is not suitable for using in die casting moulds of aluminium alloys.
|
|
| |
|
|
Reduction of Contact Pairs Friction Losses
Novotný, Marek ; Raffai, Peter (referee) ; Maršálek, Ondřej (advisor)
This bachelor thesis deals with the topic of mechanical efficiency of contact pairs in the crankshaft of the combustion engine. The introductory section focuses on the efficiency of the combustion engine as a whole. In addition, it describes the areas where mechanical losses primarily occur. The following chapters describe mechanism of friction losses, the main factors affecting their amount and the most modern ways to increase mechanical efficiency. In the closing chapter, some basic computing relations, describing the size of mechanical losses are listed. The aim of this thesis is to acquaint the reader with the importance of mechanical efficiency in the area of combustion engines.
|
|
|
New generations of PVD coatings
Kantar, Filip ; Kolář, Ladislav (referee) ; Jaroš, Aleš (advisor)
Bachelor thesis deals with methods of coating, cutting tools and a new generation of coatings. In the first part are listed and described basic coating methods. The next part is aimed on coating of PVD methods. In the third part are listed basic tool materials and their characteristics. The last part is focused on new generation of coatings, their application, properties and structures.
|
|
|
Analysis of the coated carbide cutting inserts
Zdráhala, Radim ; Kolář, Ladislav (referee) ; Fiala, Zdeněk (advisor)
Bachelor thesis is focused on the analysis of the cutting and specific cutting forces during face milling of coated and uncoated exchangeable cutting inserts (VBD). The theoretical part deals with the characteristic of the milling process, coating of cemented carbides and last but not least deals with methods for measuring cutting forces. The experiment is described in the experimental part that also includes evaluation of load forces coated and uncoated exchangeable cutting inserts during changes in cutting conditions. Finally is performed the comparison of values coated and uncoated VBD for flank wears and load cells.
|
|
|
Turning technology solution parts "flange" with coated cutting tools
Maršálek, Radek ; Dvořák, Jaromír (referee) ; Kalivoda, Milan (advisor)
This work deals with the use of coated tools in the production of component "flange" on the CNC lathe. The first section describes the process of the coating of tools and an overview of coating tools for machining from well-known manufacturers around the world. Further, it provides the assessment of technology for manufacture the components, the design of semiproduct, the solution of the technological process with the incorporation of the CNC lathe, the assembly of work instructions with calculation of machinery times, and the processing of the NC program and its subsequent verification by simulation of manufacturing process and technical-economic evaluation of the proposed solution.
|
|
|
Coating methods for cutting tools
Doležal, Jan ; Madaj, Martin (referee) ; Humár, Anton (advisor)
Bachelor work describes methods of coating of cutting tools and their technical characteristics. The work is given below the current product range of manufacturers of coated cemented carbides. At the end of this work is treated the development of coating cutting tools and types of applied coatings.
|
|
|
Coating methods for cutting tools
Bittner, Jan ; Sedlák, Josef (referee) ; Humár, Anton (advisor)
The present bachelor study prescribes process of coating deposition, namely PVD a CVD technology. In the review, new turning grades of market leading hardmetal cutting tools producers are listed. Further or, some of new developments in field of coating technology are mentioned
|
|
|
Technological applications of cemented carbide tools
Brlica, Vlastimil ; Humár, Anton (referee) ; Prokop, Jaroslav (advisor)
The fully fashioned bachelor’s thesis within the frame of the bachelor‘s study B2339-00 at the Fakulty of mechanical engineering deals with subject cemented carbide tools. General infomation is characterized by literary production; e.g. division, characteristics and manufacturing. The particular examples of cutting conditions are worked up in the second part of this study followed by calculation of economic aspects in the proces of tooling. The information about materials, cutting conditions and prices of exchange cutter bit from cemented carbide are drawn from catalogues of Sandvik – Coromant company.
|
guest ::
