|
Deposition of magnetic nanostructures using EBID and optimalization of their chemical composition and morphology
Vyroubal, Ondřej ; Kolíbalová, Eva (referee) ; Kolíbal, Miroslav (advisor)
This master's thesis deals with deposition of cobalt nanostructures using Electron Beam Induced Depositon (EBID). The thesis firstly describes theoretical background regarding EBID. In the following experimental part, the deposition process is optimized via analysis of exposition parameters and their influence on the final shape of nanostructures. These are analyzed via Atomic Force Microscopy (AFM). Optimized exposure parameters are then applied to the deposition of functional 3-dimensional nanostrucutres. In particular, the deposition of cobalt spheres. The elemental composition is analyzed by the means of element composition using Energy-dispersive X-ray Spectroscopy (EDX) and the nanostructures of desired morphologies are studied with Magnetic Force Microscopy (MFM) and Magneto-Optical Kerr Microscope).
|
|
Concentration of cobalt in wastewater and its removal using a constructed wetland
PIVONKOVÁ, Eliška
The presented bachelor's thesis discusses monitoring of wastewater in a vegetation wastewater treatment plant in the village Slavošovice, Czech Republic and an efficiency of cobalt removal from wastewater. Cobalt concentration in wastewater was determined using the atomic absorption spectrometry. The analyzed wastewater samples were taken from different parts of the constructed wetland's system in the period from March to September 2015. The obtained results enabled to calculate the efficiency of cobalt removal from wastewater.
|
|
Ellipsometry of Thin Films
Novotný, Zbyněk ; Navrátil, Karel (referee) ; Nebojsa, Alois (advisor)
Diploma thesis deals with ageing process of thin films of Co and Cu on Si substrate, prepared by the IBAD method. The process of film ageing, which depends on time of exposition to the atmosphere at room conditions, was investigated with spectroscopic ellipsometry (VIS+UV) and atomic force microscopy. In case of thin Co films, approximately four days long incubation period was observed. During this time period, a change in the optical parameters of the film occurs without a measurable change of the film topography. Using non-contact atomic force microscopy, a growth of the transitional film in the island growth regime was observed. During the ageing of thin Cu films, two stages of growth of the transitional layer were observed - nucleation stage and growth stage. Both of these time periods of the transitional layer growth show direct logarithmic dependence. Using non-contact atomic force microscopy, the growth of the transitional film was observed. Using atomic force microscopy in non-contact regime, time dependent measurement was done and the process of forming of one monolayer of the transitional layer was documented. Within the diploma thesis, a series of experiments on ultra high vacuum system were performed in order to investigate phase transformation of thin Fe films (22 monolayers) on Cu(100) stabilized by CO absorption. The transformation from fcc phase to bcc phase was induced by Ar+ ion beam bombardment with the ion energy in the range (0.5-4) keV. The process of phase transformation was observed by surface magneto-optic Kerr effect, Auger electron spectroscopy and low energy electron diffraction.
|
|
Selective growth of metallic materials.
Šimíková, Michaela ; Schneeweiss, Oldřich (referee) ; Čechal, Jan (advisor)
The diploma thesis deals with selective growth of cobalt thin films on lattices created by focused ion beam on Si(111) substrates with thin film of silicon dioxide. Further, the growth and morphology of iron thin films growing on Si/SiO2 substrate without modification was studied. In the last part, thin film of a-C:H, influence of preparation parameters on their growth and ratio of sp2 and sp3 bonds, was investigated. For analysis of those films XPS, AFM, and SEM metods were used.
|
| |
|
The influence of cobalt additive on parameters of positive electrode for Ni-Cd accumulators
Svoboda, Michal ; Svoboda, Vít (referee) ; Špičák, Petr (advisor)
The Master´s thesis deals with description of the influence of cobalt additive on positive electrode parameters for Ni-Cd accumulators. Trough the use of Electrochemical Quartz Crystal Microbalance are analysed the effects which decline effective life of positive electrode during accelerated cycling. Theoretical part describes important characteristics of Ni-Cd accumulators, the working principle and effects which are in progress on positive electrode during cycling. The next part deals with description of system EQCM and the pricnciples of doping active mass with cobalt additive. Practical part consists of EQCM system calibration and electrochemical measurements. The principal aim is detection of the influence of cobalt additve on active mass during cycling in different electrolytes. From the results of measurements is set the optimal amount of cobalt additive.
|
|
Microdetermination of cobalt by methods of molecular and atomic absorption spectrometry
Charuza, Martin ; Řezáčová, Veronika (referee) ; Sommer, Lumír (advisor)
This diploma thesis is focused on microdetermination of cobalt by UV-VIS spectrophotometry with organic agents and comparison with atomic absorption spectrometry. In the first part properties, occurance and importance of cobalt in the environment are desribed, complete with as a part of vitamine B12. Attention is also given to cobalt compounds, especially in the oxidative states +II and +III. Methods of preconcentration and preparation cobalt determination in real samples are adduced. In this thesis are described some optical analytical methods with accept on spectrophotometric agents for determination of cobalt. The experimental part of this thesis icludes optimalization of the spectrophotometric determination of cobalt with choosen organic agents 4-(2-pyridylazo)resorcin and 2-(5-Brom-2-pyridylazo)-5-diethylaminophenol and optimalization of atomic absorption spectrometry for cobalt determination. All of real samples of water (surface, underground, mineral and waste) were measured by both 4-(2-pyridylazo)resorcin and 2-(5-Brom-2-pyridylazo)-5-diethylaminophenol via UV-VIS and via atomic absorption spectrometry. Results of determinations were compared. A sample of vitamine B12 was measured too by all techniques.
|
| |
| |
|
Preparation of Ag/Co/Ag Trilayers
Burda, Pavel ; Kolíbal, Miroslav (referee) ; Čechal, Jan (advisor)
The Bachelor's thesis is aimed to the preparation of silver and cobalt ultrathin films. The films are formed on modified surfaces of crystalline silicon substrates (SiO2/Si(111), Si(111) ?H, Si(111) 7×7) and amorphous SiO2 in a form of a quartz glass. Thin films are grown using an effusion cell for Molecular Beam Epitaxy (MBE). Surface modified surfaces are covered subsequently by a silver, cobalt and silver thin layer. The individual film thickness is 6 nm. Consequently the samples are studied by the X-ray Photoelectron Spectroscopy (XPS) and the Atomic Force Microscopy (AFM). The morphology of thin films and growth modes are compared among the substrates. Growth modes change with the surface modification type. Complete trilayer system Ag/Co/Ag was prepared on SiO2/Si(111) and Si(111) 7×7. Such system can be employed in plasmonics in order to allow the control of surface plasmon polariton properties by an external magnetic field.
|