|
|
Crystallization of coating systems based on epoxy resins.
Seidlová, Michaela ; Dohnálek,, Pavel (referee) ; Petránek, Vít (referee) ; Drochytka, Rostislav (referee) ; Bydžovský, Jiří (advisor)
Crystallisation of epoxy resins based on bisphenol A and bisphenol F is the natural property of these oligomers. However, manufacturers of paints and other systems based on these epoxy resins, strive to slow down the crystallisation process as much as possible, thereby prolonging the shelf life and improving the competitiveness of their products. The main aim of the thesis is generalisation of the factors influencing the crystallisation process of epoxy resins based on bisphenol A and bisphenol F, verifying new approaches to the possibility of influencing the crystallisation process and determining the possibility of using a certain degree of epoxy resins crystallinity based on bisphenol A and bisphenol F in the preparation and production of epoxy resinbased coating systems.
|
|
|
Design of grout joint for chemical exposure using secondary raw materials
Matušková, Veronika ; Hodná, Jana (referee) ; Drochytka, Rostislav (advisor)
The aim of the bachelor’s thesis is the design of a high-quality polymeric grout joint using secondary raw materials and hazardous waste for increased chemical exposure. The main use assumed of the proposed grout joint is grouting of the cast basalt elements in building objects that are systematically exposure due to the highly aggressive chemical load. The use of input materials produced by progressive technologies should be another benefit of this grout joint to enhance the ecological aspects of the grout joint production.
|
|
|
Development of polymer repair materials using secondary raw materials
Juřička, Viktor ; Vyhnánková, Michaela (referee) ; Drochytka, Rostislav (advisor)
The diploma thesis deals with the development of polymeric repair mortars in two qualitative levels ECONOMY and PREMIUM, designed especially for heavy engineering plants and the energy industry. In order to effectively withstand difficult industrial conditions, the developed materials should meet the highest requirements such as increased chemical and heat resistance, excellent adhesion to the concrete substrate, minimal shrinkage and other physical and mechanical properties. The PREMIUM level is aimed to achieve maximum physical and mechanical properties. Within the economy version, the emphasis is placed not only on very good properties, but also the possibility capability of reducing price of the resulting material. The partial aim of this work is the efficient use of secondary raw materials, mainly based on industrial waste in the form of fillers to the developed polymeric repair mortars.
|
|
|
Development of progressive polymer anchor material
Žlebek, Tomáš ; Jakubík, Aleš (referee) ; Drochytka, Rostislav (advisor)
The diploma thesis deals with development of a new progressive anchor material on the polymer base. Nowadays, it is effort to utilize secondary raw materials in building industry as much as possible both from an environmental aspects in order to save primary energy sources and the reduction of waste and also due to economic reasons. Therefore, there is an effort to utilize high amount of suitable and appropriately treated secondary raw materials into the anchor materials. The main aim of this work is to develop high quality anchor material characterized by excellent ratio between speed and strength growth, high chemical resistance, thermal resistance and particularly minimal shrinkage. This new material is designed especially for anchoring building structures heavy machines steel barriers and other elements.
|
|
|
Development of high polymer grout system
Ručková, Kateřina ; Seidlová, Michaela (referee) ; Drochytka, Rostislav (advisor)
Bachelor thesis is focused on polymer grout, designed for heavy engineering operations and energy industry. The aim of the thesis is to define the requirements for use of polymer grout and also evaluation of testing procedures and legislative regulations on properties of these materials. Based on theoretical knowledge gained from literature will be designed HighTech polymer grout using secondary input materials.
|
|
|
Additives effect on electrical properties of the epoxy resins
Šebesta, Petr ; Kazelle, Jiří (referee) ; Frk, Martin (advisor)
Work was carried out in collaboration with SYNPO, Inc. Pardubice, which provided samples resins with various additives for measurement. The work is divided into three theoretical and one practical chapters. The first chapter focuses on dielectrics in general. It deals with their properties and storyline running in them. The second chapter discusses epoxy resins, their formulation, production and application in manufacturing. The third chapter offers a view of the measurement methods used for diagnosing electrical dielectrics. The practical part describes the preparation of samples and their composition, and consequently their measurement with the evaluation of measurement data.
|
|
|
Inorganic fillers effect on electrical properties of the epoxy resins
Doležel, Tomáš ; Jirák, Josef (referee) ; Frk, Martin (advisor)
This thesis deals with problems of electrical insulation materials based on epoxy composites used in the electronics industry. This thesis is divided into theoretical part focused on composite materials, their technological processing and diagnostics. It also describes dielectric materials, their properties and events taking place in their structure. The experimental section describes the measurement of electrical properties of samples of electrical insulating materials with different types of fillers.
|
|
|
Polymer protective systems for concrete floors
Novotná, Adéla ; Vyhnánek, Miroslav (referee) ; Petránek, Vít (advisor)
The thesis is addressing the testing of protective polymer layers, which are used mainly for industrial floors. A summary table of standards is presented, dividing the test carried out on the binders, fillers, fresh mixture and polymerized material. Non standardize tests are described in detail in a very similar way as it is performed by the Institute of Technology of Building Materials and Components. The second part of my thesis is devoted to testing of the reference material and material filled with raw substances. Based on recommendations of Lena Chemical Company, filler – ground windscreen glass will be used. On this type of mixture selected set of tests needed for construction and technical certificates was performed.
|
|
|
Degradation of nanocomposites
Polách, Ondřej ; Rozsívalová, Zdenka (referee) ; Polsterová, Helena (advisor)
The present work deals with the electrical properties of nanocomposite materials. Samples for the practical part consisting of epoxy resin as matrix and SiO2 as nanofillers and were made in four different percentage performance. There is investigated the influence of thermal degradation of nanocomposite materials change resistivity, loss factor and relative permitivity.
|
|
|
Study of electric properties of nanocomposit material
Ovsík, Jiří ; Rozsívalová, Zdenka (referee) ; Polsterová, Helena (advisor)
This work deals with the electrical properties of nanocomposite materials. Samples for the experiment are made of epoxy resin as matrix and titanium dioxide TiO2 as nanofillers in varying percentage performance. Measurements are temperature dependent components of the permittivity, dissipation factor and resistivity. Furthermore, the internal resistivity is observed with regard to the percentage performance of a sample of nanoparticles.
|
guest ::
