|
|
Preparation and characterization of highly filled composite materials for dental applications
Gavroňová, Ivana ; Bystřický, Zdeněk (referee) ; Poláček, Petr (advisor)
Master thesis deals with highly filled particulate composite materials for dental applications. In the practical part, the dimetacrylate matrix was filled with a mixture of particles of different types and different sizes to achieve the maximum possible packing. Moreover, filler content and the influence of filler on composite material was studied. Hydrolytic stability was also tested on composite materials. The methods used to characterize composite materials were bending test, thermogravimetric analysis (TGA), differential scanning photocalorimetry (DPC), dynamic-mechanical analysis (DMA) and scanning electron microscopy (SEM). Curing of the matrix was characterized by the degree of conversion, the heat of polymerization and the polymerization rate. Furthermore the polymerization shrinkage was measured. The glass transition temperature, the dynamic modulus at 40 °C and 100 °C, the modulus of elasticity, the strength, the critical value of the stress factor and the critical energy release rate were found in the tested samples.
|
|
|
Manipulation with material at storage
Moškoř, Jakub ; Dvořák, Milan (referee) ; Štroner, Marek (advisor)
This bachelor thesis deals with concept of storaging of metal sheets. Focusing on differences in metal sheet handling and storaging. Key aspects are effectivness of storaging space and material flow on critical day. There is also literal research in the field of material handling and handling technology as part of this thesis.
|
|
|
Implementation of the Milk Run System for Production Lines of the Selected Area
Nemec, Matej ; Zlochová, Martina (referee) ; Jurová, Marie (advisor)
Diploma thesis is focused on implementation of logistics system Milk Run for automotive lines in selected manufacturing company, which allows to deliver raw material for production effectively and on time. The theoretical part deals with the logistics principles, which are supporting lean manufacturing. The practical part is focused mainly on description of new supplying process and steps needed for implementation of Milk Run system in the company. The thesis is concluded with evaluation of project’s expected benefits.
|
|
|
Composite materials used in the manufacture of cars
Rendek, Marek ; Juliš, Martin (referee) ; Němec, Karel (advisor)
Bachelor’s thesis deals with various types of composites used in the spheres of automotive industry. In the first section, it’s focused on the introduction to issues of composite materials, methods of production, their advantages and disadvantages. The second part of thesis focuses on specific applications in the automotive industry. In the final part there is a future evaluation and an overall view of the composite materials in the automotive field.
|
|
|
Optimization of large technology compound design
Krňávek, Ondřej ; Kršík, Jakub (referee) ; Nevařil, Aleš (advisor)
This thesis deals with the optimization of the structural design of large technology compounds. The main emphasis is placed on the participation of available optimization instruments in the design of supporting structures of these constructions. The introductory part is primarily focused on the optimization itself. In this part are further specified also used optimization methods, computational finite element method, implemented code checks and calculation of cost of construction. The main part is dedicated to application of optimization procedure for the design of steel supporting structure of the auxiliary technological object of thermal power plant. The objective criterium shall then constitute the total cost of construction works along with operating costs. For the solution is used Scia Engineer software together with optimization module Scia Engineer Optimization Toolbox. The whole analysis is presented comprehensively from the description of computational model to results evaluation. The attention is paid to the optimization task settings, technical solution of optimization, optimization methods deployment and during the calculation process (especially to the development of objective function values and desing constraints during the optimization solution).
|
|
|
Production process optimization
Hejzlar, Aleš ; Vacek, Jan (referee) ; Fiala, Alois (advisor)
This diploma thesis deals with the production process optimization. The cutting operation and the lathe-turning issue is described in this thesis. In the practical part the production process is analyzed, the designed experiment (DOE) is suggested and evaluated. In the end of the practical part there is the evaluation of the machined material in the light of microstructure. On the basis of the partial findings the enclosures are done and the recommendations leading to the production optimization are suggested.
|
|
|
Composites Application in Automotive Industry
Bačovský, Marek ; Dundálek, Radim (referee) ; Ramík, Pavel (advisor)
This bachelor´s thesis deals with the use of composites in the automotive industry. The first part of the thesis processes overview of the basic properties of composites, their structure, characteristics, advantages and disadvantages. The second part focuses on their application in series manufacture and in racing cars, incl. Formula Student. The final section provides a view into the future and the overall evaluation of composite materials.
|
|
| |
|
|
The Study of Storage in Manufacturing Corporation
Kulíková, Alena ; Čejková, Marie (referee) ; Jurová, Marie (advisor)
The master´s thesis is concerned with the process of storage in Gmont cable, s.r.o., the company interested in cable harnesses for the automotive and industrial machines. The document describes and analyses the existing situation of the process of storage and also reflects on the suitable concept of its solving. The purpose is the effectiveness of the process and searching for the savings source of costs.
|
|
|
Types of packaging and their representation in municipal waste
Kostková, Kateřina ; Kropáč, Jiří (referee) ; Pavlas, Martin (advisor)
The bachelor thesis deals with the types of packaging materials, related legislation and the use of packaging in practice. The research part of the work presents individual types of materials and their characteristics. An important part of waste treatment is the recycling and utilization of packaging waste. The work presents different recycling principles for individual materials. The practical part analyzes the individual representation of packaging materials of selected consumer products.
|
guest ::
