|
|
Reducing the operating temperature of the production and laying of asphalt mixtures
Komenda, Radek ; Valentin,, Jan (referee) ; Hýzl, Petr (advisor)
The subject of this thesis is the issue of reduction of the operating temperatures in the production and laying asphalt mixtures with a more specific focus on influencing the functional properties of these mixtures, especially low-temperature parameters. The thesis is notionally divided into two parts. The first part refers to the low-temperature asphalt mixtures and the second part pays the attention to asphalt mixtures with an added R-material. For production of asphalt mixtures in the first part of thesis were used five additives and for the second part were used a total of four different asphalt mixtures which differs in the participation of added R-material. Both parts are divided into a theoretical part, which discusses the existing experience, the use of these mixtures and the practical part, which analyses in detail the tested mixture ( the composition and preparation of tested specimens ) and deals with the result of laboratory test. In particular, it is a test of asphalt mixture resistance against the formation of frost cracks according to ČSN EN 12697-46 and by comparing the individual mixtures in comparison with the reference sample and among each other.
|
|
|
Analysis of utilization of waste generated in the production of cement-bonded particleboards
Melo, Michal ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
The content of this diploma thesis is to explore the possibility of utilization of wastes generated in the production of cement-bonded particleboards in terms of their application as secondary raw materials back into the production. At first an attention was focused on a fine-grained waste containing wood particles with cement matrix produced during the final adjustment of boards. Further, fly ash generated from the combustion of wood chips in the biomass boiler is assessed. In the theoretical part the different types of waste generated in the production of cement-bonded particleboards are characterized, including their methods of creation, production, use or disposal of the current and other proposals for utilization in the future. The research papers dealing with applications of various wastes in the production of cement composites with organic fibers were also studied. In the experimental part of the thesis the characteristics of each type of waste generated in the production of cement-bonded particleboards are evaluated using laboratory analyses and their pretreatment methods for another use are designed. Subsequently performed the laboratory verification capabilities of secondary raw materials from wastes in cement-bonded particleboards identifying and evaluating basic physico–mechanical characteristics of boards with modified composition.
|
|
|
Change in the durability of concrete made of recycled concrete by alternative addition of ceramic admixtures
Stavař, Tomáš ; Hoffmann, Oldřich (referee) ; Stehlík, Michal (advisor)
The master thesis dealing with problematic about durability of concrete, with use of recycled concrete and addition of silica additions. Predominant for resistance of concrete constructions is surface layer, through which aggressive gasses and liquids penetrate from surrounding environment. The most important indicator of concrete durability is ability of surface layer transmissions of aggressive substants. In experimental part will be defined the actual state of surface layer by normal testing methods. The transmissions of surface layer will be tested on concrete cubes. Tests for transmissions of air (method TORRENT), of water (method ISAT), of acid gases (dept of carbonation by quick test in 98% CO2) will be carried out and also strength tests. Assessment of positive or negative influence of additions and amount of cement on durability and mechanical properties of concrete will be discussed in conclusion.
|
|
|
Development of multilayer polymer floor systems
Tesař, Filip ; Vyhnánek, Miroslav (referee) ; Petránek, Vít (advisor)
Multilayer polymer flooring systems belongs to widespread materials for industrial constructions and also for public constructions. These are mostly two-components polymeric materials based on epoxy. The main aim of my thesis is to make list of requirements for multilayer polymer flooring system and utilization of waste materials as fillers in polymer epoxy. Then use this knowledge for development of multilayer polymer flooring system and propose the new recipe and primary test´s for this material.
|
|
|
Development of Resistant Coating Systems Based on Polymer Binders
Voráčová, Veronika ; Vyhnánek, Miroslav (referee) ; Petránek, Vít (advisor)
The aim of the thesis is to propose the use of waste materials as filler for the selected coating systems used for chemical protection of concrete surfaces.The used filler could not affect the existing binder of the coating system. Research was conducted using two materials N141 and N 121. The waste material was chosen by his chemical and physical properties. Between suitable materials belongs slag, fly ash, foundry sand and glass waste. The selection based on Lena Chemical s.r.o companies request was selected glass waste. The practical part includes examination as fillers, and the corresponding tests for coating systems with pre-used filler. Finally, the assessment of the suitability of the materials used.
|
|
|
Materials based on the foam glass of secondary raw materials
Hons, Oto ; Petránek,, Vít (referee) ; Bydžovský, Jiří (advisor)
In the theoretical part of diploma thesis basic knowledge about glass are given (materials, production process, a brief overview of glass products for construction industry) and statistics of waste production, primarily with an emphasis on various types of waste glasses were also mentioned. The following chapters of the thesis are focused on waste glass processing technologies. Various studies about the application of waste or recycled glass in manufacturing of building materials are summarized. In the practical part of diploma thesis were suggested appropriate secondary raw materials that were used to prepare materials based on thermally modified glass foam. In the practical part of the thesis was carried out a set of experiments and analysis, including evaluation in terms of the proposed alternative fillers and materials made of them.
|
|
| |
|
| |
|
|
Evaluation of Polymer Separation System Purifier N 1024 device efficiency
Duliková, Michaela ; Charvátová,, Michaela (referee) ; Čáslavský, Josef (advisor)
In this Diploma Thesis the recycling of the PET bottles in the company PETKA CZ, a.s. is under focus. Thesis describes the Italian technology AMUT designed for physical recycling of the PET bottles. The primary goal is the quality of the final recycled product, PET flakes, particularly in the context of undesirable admixtures such as PVC, other polymers and impurities. Due to the deteriorating quality of the PET flakes the equipment Polymer Separation System Purifier N 1024 has been tested, which had significantly reduced admixtures in PET flakes. As it turned out, the current procedures for solving problems with the PET flakes quality are no longer sufficient.
|
|
|
Presentation pavilion of WANEMI, a.s. paper-mill in Zábřeh
Říhová, Helena ; Svoboda, Jiří (referee) ; Zemánková, Helena (advisor)
The sense of the diploma paper is to make a new entrance - green belt - for the paper factory - WANEMI. There is the exhibition pavillion and the administration building situated in the green belt. The main point of the diploma is the exhibition pavillion. The project is based on the basic principle of ekological architecture like - demounting, using of the waste water and using of the waste warm air. The elementary pavillions´ shape reminds of a paper folder. There are another small exhibitions and constructions in the park. Everything is united by shape and material. The park is the cultural area for sport and education.
|
guest ::
