|
|
Mechanical Properties of solder joint
Meliš, Josef ; Starý, Jiří (referee) ; Stejskal, Petr (advisor)
This thesis deals with the differences between the mechanical properties of surface conditionings of the printed circuit boards and various types of soldering pastes. The practical part of the thesis describes all the steps necessary to conduct the experiment. The experiment will evaluate the measured mechanical strength of the solder joint for each surface conditioning, the types of solders, the increase in thickness of the intermetalic layer during long-term aging and the change in the structure of the solder joint.
|
|
| |
|
|
QFN Packages Soldering and Technology Procedures
Jakub, Miroslav ; Brno, Petr Martinec, HONEYWELL (referee) ; Starý, Jiří (advisor)
This master´s thesis deals with QFN packages soldering and technology procedures optimization. The aim of theoretical part is description of QFN packages, their assembly and reflow soldering on PCB in HONEYWELL. The aim of the practical part is to propose a method of measuring temperature and optimizing the thermal profiles of selected PCB with QFN packages by using convection (HONEYWELL) and infrared (BUT) reflow ovens. Comparison and evaluation of thermal profiles for 3 production PCBś with QFN packages using solder paste AIM NC257-2 were realised. The main part of master´s thesis are appearance evaluation of solder joints, preparing microsection and measuring intermetallic layers thickness by using the optical and the scanning electron microscopes, analysation and study of QFN defects created during soldering proces. These tests were performed with 2 production PCB´s. Optimization of SPI and soldering technology procedures where were analyzed QFN packages were processed on one type of PCB. Interesting part of this diplomma thesis is creating of the 3D heat transfer model of QFN package during the reflow soldering in SolidWorks.
|
|
|
Optimizing of QFN Package Assembly Process
Šváb, Martin ; Jankovský, Jaroslav (referee) ; Szendiuch, Ivan (advisor)
The Master thesis deals with technology of mounting QFN packages on to the printed circuits boards. Describes also influence of shape and size of soldering pads and the amount of soldering paste with respect to the quality and the reliability. In first part overview of existing packages is summarised. Second part describes design of testing board and the factors which leads to eliminating errors during manufacturing process.
|
|
|
The possibilities of SMD components soldering by equipment Fritsch
Juračka, Martin ; Šandera, Josef (referee) ; Adámek, Martin (advisor)
This thesis focuses on soldering technology in microelectronics. It describes in detail the basic ways of soldering and repairs in electronics. This piece of work shows the principles of technological equipment for bulk soldering and used repairing devices. In the theoretical part of this work there are also briefly described the packages for integrated circuits that were used in the practical part of the thesis. The practical part of the thesis deals with setting of the heat profiles for hot air repair station Fritsch Mikroplacer for LQFP64, SOIC16, TSSOP14, QFN16 and DSBGA5 packages. The heat profiles for assembly and disassembly of the particular types of the packages on designed and manufactured test printed circuit board were set and tested. The resulting heat profiles are compared with the recommended heat profile of an ordinary solder paste SnAg3Cu0,5 which was used for the test. This thesis can serve as an aid for the further settings of heat profiles in other types of packages not only on Fritsch Mikroplacer devices, but also on other repairing devices of this type.
|
|
|
Solder Joint Reliability and Wetting Characteristics Influence
Labaj, Radek ; Stejskal, Petr (referee) ; Starý, Jiří (advisor)
This thesis deals with the methodology of testing the wetting characteristics for different material and process effects in the double-plated base material. Testing is performed by wetting balance method. There is designed procedure to calculate the angles on each side of the non-homogeneous material. The Design of Experiments method is used to interpret the results, by using this method are also interpreted electrical and mechanical properties of solder joints. The correlation with wetting characteristics is discussed.
|
|
|
Analytical electron microscopy of lead-free nanopowder solders
Buršík, Jiří ; Sopoušek, J. ; Zálešák, Jakub ; Buršíková, V.
During the last decade, the EU legislative regulations enforced lead-free solders and hence initiated an extensive search for the best replacement of lead-containing solders. Parallel to new binary and ternary bulk solders, metal nanoparticles are also considered as potential candidates for solder materials. It is known that physical, electric and thermodynamic properties of nanoobjects are significantly different from those of the bulk materials. The oxidation, high reactivity of the surfaces and aggregation are frequent problems of nanotechnology applications. The nanoparticles of pure metals and alloys exhibit the depression of the melting point compared to bulk material, hence they are able to aggregate and to form firm interlayer joints at low temperatures. Exploiting this effect can save energy, work and materials.
|
|
| |
|
|
Electron microscopy of nanoparticles for lead-free soldering prepared by wet chemical synthesis
Buršík, Jiří ; Škoda, D. ; Vykoukal, V. ; Sopoušek, J.
The nanoparticles of pure metals and alloys exhibit the depression of the melting point compared to bulk material, hence they are able to aggregate and to from firm interlayer joints at low temperatures. Exploiting this effect in soldering industry can save energy, work and materials. Using emulsions with nanopowders might be the solution of demanding task of replacing classical Sn-Pb solders by their lead-free substitutes. In this work, Ag- and Sn-based nanopowders were prepared as potential low-toxic constituents of novel solders by a chemical wet synthesis from chemicals of high purity. Various ways of preparation and further storage of the product were examined. Resulting nanoparticles (their size distribution, morphology and tendency for clustering) were characterization by means of scanning and transmission electron microscopy.
|
|
| |
guest ::
