|
|
Enhancement Of Axial Ratio Bandwidth Of Antenna Array By Parasitic Patches
Spurek, Jan
This paper summarizes the concept of a circularly polarized antenna array fitted with parasitic patches to increase its axial ratio bandwidth and compares the results of simulations and measurements taken on a reference antenna array. The measurements show a good agreement with the simulations and confirm validity of the proposed technique.
|
|
|
Planar Antenna Array For Ku Band
Prouza, Jakub
The paper deals with the design of an antenna element of an ultra-wideband antenna array for specialized applications. The realized gain of the whole structure, the main beam width and the possibility of electronic beamforming in the horizontal plane are the most important parameters of the designed antenna array. The numerical model of the antenna array is created, and parameters are verified to prove suitability for ultra-wideband applications.
|
|
|
Suppression of side lobes of an antenna array by unequal power distribution on the elements
Saloka, Samuel ; Mikulášek, Tomáš (referee) ; Špůrek, Jan (advisor)
This bachelor thesis is focused on the design of an antenna array with four patch antennas. In the first part, the theory of a microstrip antenna and power divider with equal and unequal power distribution on elements design are summarized. In the second part, calculations necessary for the design of the antenna and both arrays are found. The third part contains modeling, optimizations and simulation results of the individual models and consequently the assessment of the results. A summarization of the measured results as well as photo documentation of the produced structures are in the fourth part. Conclusion of the entire work and its results are deliberated in last part.
|
|
|
Broadband linear antenna array for BAN applications
Gaja, Tomáš ; Kufa, Martin (referee) ; Puskely, Jan (advisor)
The work deals with the design and the practical realization of a single element of antenna arrays and with the simulation of all elements of antenna arrays for application in BAN. The main attention is focused on the shaping of radiation pattern with suppression of unwanted side lobes. Based on these principles the script was created in MATLAB environment which effectively analyses features of each desired antenna array. The next section of this work is focused on design of narrowband Patch antenna and broadband Vivaldi antenna in frequency band ISM 5.8 GHz and supply network for antenna arrays. Designed antenna arrays were verified in simulator of electromagnetic field CST including their function and features in proximity of human tissue. These simulations were experimentally made only for a single element of antenna arrays. The results from measured radiation pattern were analyzed in script as array about eight elements.
|
|
|
Reconfigurable slot antenna array
Weigel, Filip ; Pítra, Kamil (referee) ; Raida, Zbyněk (advisor)
This master's thesis deals with the basic principles of slot antennas. Models of antennas were simulated in a selected electromagnetic simulator CST MICROWAVE STUDIO (CST MWS). There are several models of slot antennas which are optimized for communication in the car at a frequency 8 GHz.
|
|
|
Pulsed Electromagnetic Field Radiation from Slot Antennas
Štumpf, Martin ; Vandenbosch, Guy (referee) ; Škvor,, Zbyněk (referee) ; Láčík, Jaroslav (advisor)
Jednoduché dvojrozměrné anténní zářiče, které slouží jako stavební bloky anténních polí, jsou analyticky analyzovány v časové oblasti. Jako hlavní nástroj pro analýzu je použita Cagniard-DeHoopova metoda. Je ukázáno, že zvolený přístup umožňuje získat přesné vzorce v časové oblasti v uzavřeném tvaru, které jasně demonstrují vliv vstupních parametrů a objasňují fyzikální podstatu pulsního elektromagnetického vyzařování. Dané numerické výsledky ilustrují důležité aspekty pulsního elektromagnetického záření v rozličných konfiguracích problémů. Získané výsledky jsou užitečné pro efektivní návrh anténních polí, které jsou buzeny pulsními signály.
|
|
|
Dielectric resonator antenna based on substrate integrated waveguide
Kubín, Petr ; Polívka, Milan (referee) ; Mikulášek, Tomáš (advisor)
The Master’s thesis deals with the design of the dielectric resonator antenna array based on the substrate integrated waveguide. The work describes various feed methods of the dielectric resonator antenna and the technique of the design of the antenna. The antenna array was designed in the simulative program ANSYS HFSS at the frequency 10 GHz, subsequently fabricated and measured. The antenna array has the bandwidth of 570 MHz for S11 better than –10 dB and the gain of 12.1 dBi.
|
|
|
Slot Antenna Array Based on Substrate Integrated Waveguide
Sedláček, Petr ; Polívka, Milan (referee) ; Mikulášek, Tomáš (advisor)
The Master’s Thesis deals with the design of slot antenna array based on the substrate integrated waveguide (SIW). Various supply methods are described and the design procedure is approached. The antenna array was designed for Wi-Fi band of 5 GHz in the Ansoft HFSS simulation software. The optimalized parameters are impedance bandwidth (low reflection coefficient at antenna input in the desired frequency band) and the gain (the maximum value). As the result of the work 3 antenna arrays based on the substrate integrated waveguide are designed and fabricated: antenna arrays 2x1, 2x2 and antenna array 2x2 supplemented with housing for outdoor use. The work also contains a comparison of simulated and measured parameters of antennas.
|
|
|
Retrodirective antenna array
Šindler, Pavel ; Morávek, Ondřej (referee) ; Pokorný, Michal (advisor)
In the first part of this thesis a basic theory of retrodirective antenna arrays and their particular parts – antennas and mixers is summarized. Further, there is a basic summary of possibilities for an usage of retrodirective antenna arrays for an information transmission. The second part deals with the concrete retrodirective antenna array design. The design starts with creation of an antenna array model for MATLAB software. Then a suitable structure for further design is chosen. Further, particular parts of retrodirctive antenna array – a patch antenna, a mixer, a low-pass filter, a bandstop filter, a signal combiner and a Wilkinson power divider are designed and analyzed in Ansoft Designer software. For the patch antenna analysis also CST Microwave Studio software is used. The following part deals with the realization of particular parts of the retrodirecive antenna array and its parameters measuring.
|
|
|
Near field of the dipole antennas
Beran, Vlastimil ; Tkadlec, Roman (referee) ; Nováček, Zdeněk (advisor)
The thesis describes the radiation of dipole antennas in near field area. More methods for evaluation of spatial dipole field arrangement are compared. The work target for practical use is to create software for simulation of near field values placed in planar or cylindrical observation plane. The computer programme is applicable to single dipole or dipole array. The limits for human body exposition of non-ionizing radiation are here implemented for compliance purpose in hygienic evaluations. The simulated results of field distribution are possible to display as graphs or save to data file. The results of own calculation are compared with results obtained by some commercial software as well by measurement of field components under model conditions.
|
guest ::
