|
|
Road bridge over the Budišovka river
Zývala, Pavel ; Požár, Michal (referee) ; Koláček, Jan (advisor)
The aim of this bachelor thesis is to design of bridge construction over the river of Budišovka located near the village of Budišov nad Budišovkou. The load bearing system is composed from one reinforced concretespan. The structural design was made in two variants, which were compared between them. For calculations of first way was used the software of Scia Engineering 16.1 and second way was calculated by simplified manual method of effective width. All calculations were performed according to actual standard EN.
|
|
|
Slab bridge in Budišov nad Budišovkou
Ilčík, Jakub ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
Subject of this bachelor´s thesis is design of new slab bridge construction in Budišov nad Budišovkou according to EN 1992-1-1. The bridge carries traffic across river Budišovka. It is full trapezoidal at cross-section area. Statically the construction is designed as point-supported slab with span lenght 12,0m. Cathegory of communication is S7,5. Internal forces are calculated by SCIA Engineer 15.3. Load of effects calculation and assesment of ultimate limit state and serviceability limit state is done according to valid standarts. Comparison of design with reinforcement in pressure zone.
|
|
|
Slab bridge with FRP reinforcement
Paravan, Marek ; Zich, Miloš (referee) ; Panáček, Josef (advisor)
The Bachelor's thesis deals with a design of a new slab bridge over the Svitava river. As a reinforcement for load-carrying construction with the lenght of 12,89 m and a full rectangle cross secion FRP bars were used and compared with nonprestressed steel. The calculation of load effects is solved by Scia Engineer 14 and results are checked manualy. The load-carrying construction is assessed for the ultimate limit state and the serviceability limit state according to ČSN EN 1992-1-1, ČSN EN 1992-2 and technical report fib TG 9.3.
|
|
|
Highway bridge formed by cell box girder
Hošek, Filip ; Novotný, Petr (referee) ; Nečas, Radim (advisor)
Diploma thesis is focused on solving highway bridge over deep valley. From three studies has been chosen cell box girder with transverse overhangs.The static calculation contains limit states assessment, design of precast and time discetization analysis verification. Structure design contains temporary and pernament situations assessment according to EC. Last part of project is drawnings and visualization.
|
|
|
Slab bridge near Staré Město village
Tlamka, Tomáš ; Koláček, Jan (referee) ; Panáček, Josef (advisor)
The main aim of this Bachelor thesis is the design of new perpendicular bridge over the Krupá river. The design of the bridge is according to ČSN EN 1992 – 2. The content of the work is primarily of the design supporting structure of the one - span bridge, which is designed in three variants. The selected option consists of additionally prestressed slab of height 800 mm with a length of 21,54 m. Statically is designed as support the storage bridge with a length of 19,00 m. This object converts communications category S 7,5. Load effects were performed using calculation software SCIA ENGINEER 2014. All loads and assessment at the ultimate limit state and limit state are solved according to specific standards.
|
|
|
Slab bridge over the Krupá river
Hlavoň, Michal ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
Bachelor thesis deals with the design of the new bridge according to EN 1992-1-1. The bridge is used to convert local road across the river Krupá. The bridge is designed as a plate with a full cross-section of the trapezium. Statically resolved as a bridge to support the storage of bridging length 12.2 m. Categories of communication is S7.5. Encumbered and assessment on the rezistance limit state and serviceability limit state is resolved according to the standards.
|
|
|
Slab bridge in Velké Pavlovice
Gřunděl, Michal ; Hofírek, Radovan (referee) ; Koláček, Jan (advisor)
Bachelor thesis deals with the design of the new bridge according to EN 1992-1-1. The bridge is used to convert local road across the river Trmánka. The bridge is designed as a plate with a full cross-section of the trapezium, a statically resolved as a bridge is just stored with the length of bridge 12, 1 m. Categories of communication is S 7.5. Encumbered and assessment on the MSÚ and MSP is resolved according to the standards.
|
|
|
Analysis of reinforced concrete bridge
Řeháček, Jakub ; Panáček, Josef (referee) ; Zich, Miloš (advisor)
Bachelor´s thesis is concerned with state estimation of reinforced bridge. The bridge is used to transfer local road across the Svratka river. The bridge is designed as arched bridge with tie and down deck. Lenght of bridging is 24,8 m. Loads and state estimation are done according to Eurocode.
|
|
|
The local road bridge
Janek, Tomáš ; Panáček, Josef (referee) ; Klusáček, Ladislav (advisor)
The bachelor´s thesis deal with a design and assessment a one-span girder bridge. The girder bridge is made of prestressed concrete. The aim of the bachelor´s thesis is to design and assess supporting structure to the specified load.
|
|
|
The calculation of existing slab bridge
Luliak, Ondřej ; Nečas,, Radim (referee) ; Klusáček, Ladislav (advisor)
Bachelor´s thesis is concrended with resistance simple bearing slab bridges. The main focuse is comparison diferents in resistance calculated according to ČSN valid between 1915 and 1935 compare with calculate resistance according to ČSN EN which is valid now. Next part is concrended serviceability limit state.
|
guest ::
