|
|
Thermoproperties of foundry moulds in dependence on different used foundry sands
Šuráň, Jiří ; Rusín, Karel (referee) ; Cupák, Petr (advisor)
The project elaborated in frame of engineering studies is submitting the study of thermal properties of holding mixtures using different types of sand. Were tested a total of 5 sands: zirkon, ŠH22, chromite, olivine and dunite. Molding compounds were tested for thermal capacity, thermal conductivity and heat accumulation. The highest heat capacity was achieved in dunite sand. The largest heat accumulation had mixture with chromite sand and the best thermal conductivity was found in a mixture with olivine sand.
|
|
|
Tube heat exchanger for heating water.
Novotný, Roman ; Rostislav, Ratkovský (referee) ; Skála, Zdeněk (advisor)
Target of the master´ thesis is a design of heat exchanger air-water with the air flowing inside the pipes and with staggered pipe configuration, based on the engaged and chosen values. Next target is to determine heat exchanger with cross parallel flow and cross countercurrent flow of mediums, pressure drop on both sides air and water and dimensions of intake and outgoing gate on both sides air and water.
|
|
|
Temperature Profile in Reflow Soldering and Influence of Different PCBś and ComponentsThermal Capacities
Procházka, Martin ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
This thesis mainly deals with the prediction of temperature on the components and the PCB during reflow soldering. The theoretical part describes the particular solder reflow process, types of heat transfer and temperature profiles. The practical part is divided into forecasting temperatures if the conveyor is stopped and the temperature predictions when the conveyor is in motion. In both parts of the measured temperature is compared with the predicted temperatures, which show the success rate of prediction. The last part of this work is part of the simulation, which helps in proper understanding of the issues discussed.
|
|
|
Properties comparison of two products used for skating rink based on ehtylene-propylene-dien rubber
Kostková, Jana ; Kučera, František (referee) ; Bálková, Radka (advisor)
This master thesis deals with characterization of two black and white products based on ethylene-propylene-diene rubber (EPDM) used for skating rink. Products marked with A and are different in their diameter of circular tubes trough which cooling medium passes and also in the distance of these tubes. Both of materials were characterized in order to determine whether it is the EPDM and how are they different. The characterization methods were used: differential scanning calorimetry, thermogravimetric analysis, attenuated total reflectance Fourier transform infrared spectroscopy, tensile test, swelling test, thermooxidative test. The composition of both materials, including fillers and others additives is almost the same but difference is in structure of EPDM and probably also in interaction with fillers, what exhibits different mechanical properties, thermooxidative stability and thermal capacity. These differences which have been found are essential for long-term use properties of both materials.
|
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
guest ::
