|
|
Heating of the Polyfunctional Object
Slovák, Zdeněk ; Topič, Jan (referee) ; Vendlová, Lucie (advisor)
This thesis deals with the design of the heating system in a Polyfunctional building. The design is solving heating of a Polyfunctional Object in Kostelec nad Ohří. The building has basement and two floors. The building is heated by means of panel, tubular and floor convector heaters. The source of the heat is located in the boiler room in the basement.
|
|
|
Design of heating of primary school
Pánková, Pavlína ; Vyhlídalová, Karolína (referee) ; Horká, Lucie (advisor)
The goal of this master's thesis is to design the heating system for the existing building of an elementary School. The thesis is divided into three parts. In the first theoretical part, I discusses heat transfer methods, the influence of covers on heating elements, and the determination of radiant and convective power components. The second part solves the heating system's design in three heat source variants. The first option comprises six heat pumps. The second option includes a combination of direct evaporation for air handling units and heating using heat pumps. The third option involves the installation of gas condensing boilers. At the end of the second part, a technical report is written and drawing documentation is attached. The last third part is dedicated to the experimental measurement, in which the effect of the front plate on the performance of the heating element was ensured.
|
|
|
Heating of the Training Center
Matoulková, Jana ; Topič, Jan (referee) ; Vendlová, Lucie (advisor)
The aim of this thesis was to design heating a training center in the Velke Mezirici. The heat source was designed gas condensing boiler, which covers the requirements for the heating system and heater air handling unit with heat recovery. The heat source is located in the utility room on the first floor. The building was designed by panel radiators and convectors bench.
|
|
|
Heating of the Object with Different Fuels
Ladomérská, Jana ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
In my final thesis I am processing a proposal for heating and preparing hot water for a restaurant with accommodation. This is a three-storey brick house. It is situated on the territory of the Ústí region. The aim of my work is to propose and to assess the appropriate heat source for this object. In the object I chose heating radiators. The proposal is processed in two variants. In the first variant, I suggest a cascade of condensing boilers using as a source of heat. In the second variant, I suggest a cascade of electrical boilers. Hot water will be prepared in reservoir of warm water. The source of hot water will be the same as the source for heating.
|
|
| |
|
|
Heating of Residential Building
Plšek, Michal ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The bachelor thesis deals with the design of heating and hot water heating in a new row house. The apartment building consists of four floors and a basement. The building is brick with a flat roof and is insulated. The bachelor thesis is divided into three parts. The first part focuses on solving the theoretical topic of heat distribution and measurement of heat in apartment buildings. The second calculation part solves the design of the heating system together with the design of hot water. The heating system is designed as a two-pipe hot-water system with two condensing boilers as the main heat source. The last project part contains the technical report and the corresponding drawing documentation.
|
|
|
Design of a heating system for an apartment building
Poul, Jiří ; Horká, Lucie (referee) ; Vyhlídalová, Karolína (advisor)
The aim of bachelor thesis is a suitable design of a heating system and hot water heating system for an apartment building in Nové Město na Moravě. The apartment building is built on a sloping land. The building has one basement, four above-ground floors and an attic. The apartment building has a collective garage and cellars, which are located, in the basement. There are twenty-five apartments on the upper floors. The theoretical part describes the different types of heat sources. In the calculation part is solve heating system of the apartment building. There is a detailed calculation of heat losses, design of heaters, design of heat source, design of water heating and equipment for the proper functioning of the heating system.
|
|
|
Heating and ventilation of the exhibition hall
Klus, Lukáš ; Blasinski, Petr (referee) ; Počinková, Marcela (advisor)
The bachelor thesis solves the heating, preparation of the hot water and the ventilation of the building which will serve for exhibiting and sale of bathrooms and their equipment. The theoretical part deals with theme of underfloor heating. The computational part contains the design of heating. Transfer of the heat to the rooms is ensured by plate radiators, convectors and by underfloor heating in the largest room of the building. There is mixed heating designed for preparation of the hot water. The building will be ventilated forcibly. Gas condensing boiler is designed as a heat source. The work also deals with all the necessary equipment for the system.
|
|
|
Heating of the company building
Hudcová, Nikola ; Vendlová, Lucie (referee) ; Počinková, Marcela (advisor)
The bachelor's thesis deals with the design of heating and hot water in the company building (office building with shop and apartment). The work consists of three parts, theoretical, computational and project. The theoretical part deals with underfloor heating. The calculation part includes the design of heating using heaters and underfloor heating, dimensioning of the heating system, design of hot water preparation, design of forced ventilation, design of heat source and its security devices. The heat source is made from two suspended gas condensing boilers, water heating is stacked by help of an indirect heating stationary hot water storage tank, for forced ventilation is designed an air-conditioning unit with heat recovery and a water heater. The project part contains a technical report and project documentation.
|
|
|
Heating of the production facility with administration
Bardarov, David ; Horká, Lucie (referee) ; Topič, Jan (advisor)
This Bachelor thesis consists of three main parts. The first one is theoretical and describes heating systems, their types and circulation pumps. The second part consists of calculations and describes heating framework and heating water in an industry hall with office in region Troubsko. It is a two-floor building with no basement. Both floors will be heated by board and tubular radiators. The source of heating will be two gas condensation boilers. There will be complete calculations and suggested important elements needed for running the whole system compiled in this Bachelor thesis. In the final part I processed technical report and drawing documentation.
|
guest ::
