|
|
Survey and Diagnostics of Brick Structure
Brothánek, Jan ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
The diploma thesis deals with a structural and technical survey of the surviving cellar of the German House in Brno. The first part of the thesis is devoted to the theoretical description of the constructions, methods performed and their evaluation concerning the investigated space. The aim of the survey is to determine the strength characteristics of the masonry and on their basis to propose appropriate rehabilitation and structural protection.
|
|
|
Advanced methods of application of thermal techniques in the design of heating buildings
Mikoláš, Petr ; Vyhlídalová, Karolína (referee) ; Horák, Petr (advisor)
The diploma thesis is divided into three parts. The first part is theoretical devoted to the introduction of BETONG building material. And next It is also devoted to themes of low - energy buildings and nearly zero-energy buildings, heat sharing and thermal comfort. In the second part is the concept of the heating system elaborated in three variants of the design in the scope of the study for the new family house. The third part is devoted to use of shell blocks of the BETONG with internal contact insulation compared to other masonry systems.
|
|
|
Kinetics of the continual measurement of the actual fine particulates moisture content.
Mayerová, Kateřina ; Ing.Lukáš Brzobohatý (referee) ; Svěrák, Tomáš (advisor)
This thesis deals with the continual measurement of the hydrated lime moisture content on the principle of spectral measurements. The theoretical part describes the basic principles of the infrared spectroscopy, Fourier transformation and near infrared spectroscopy, which are used in the process of the spectroscopy measurement of fine particulates moisture content. The practical part of the work describes experiments and the evaluation of moisture hydrated lime measuring results, using gravimetric method and NIR spectroscopy in both the laboratory conditions and the conditions of operation production of hydrated lime as well. The part of the work monitors the spectroscopy measurement moisture values as the dependence on the optical quality of hydrate limes and the process conditions of the measurements.
|
|
|
Analysis of EMW radiation for sterilization of biotic pests
Danielová, Marie ; Svobodová, Kateřina (referee) ; Holešovský, Jan (advisor)
Biotic pests such as wood-destroying fungi, molds, and wood-destroying insects are not only a problem for old buildings but also for newer buildings. Their occurrence has a negative effect on the physical and mechanical characteristic of building materials. One of the main causes of biotic pests in buildings is moisture. Remediation of objects in terms of moisture and biotic pests is a frequent subject of solution in construction practice. There are many methods used to remove moisture and inactivate biotic pests, and their use depends on the individual requirements of individual objects. In practice, this problem is dealt with by specialized companies using well-known technologies or further participate in their research. One of the methods used for moisture remediation and inactivation of biotic pests is the irradiation of building structures using EMW radiation. Microwave heating used to dry moisture from building materials is one of the most intensive methods for sterilizing biotic pests, and due to its intensity, it is a time and cost-effective method.
|
|
|
Fuel properties: Determination of moisture solid fuels
Tretera, Michal ; Musilová, Petra (referee) ; Lisá, Hana (advisor)
This bachelor's thesis deals with the determination of moisture content in solid fuels. First part contains classification of solid fuels, proximate analysis of solid biofuels and a research of methods for determination of moisture content in solid biofuels. Description of impacts of the moisture content on fuel is included in the proximate analysis. Second part of the thesis is experimental. Thirteen solid biofuels and one solid recovered fuel were measured to obtain their moisture content. The methods used to determine the moisture content include four different drying methods and a xylene distillation method. For each method there are details of the procedure and a summary of the results.
|
|
|
Biomass preparation and combustion technologies
Venhoda, Tomáš ; Kropáč, Jiří (referee) ; Juřena, Tomáš (advisor)
The aim of this work is to provide for background research about preparation and combustion of biomass. Technologies for preparation of biomass including ingathering prior to combustion are described in the first part of this work. Different ways combustion of biomass and comparison of different types of grates are in the second part of the thesis.
|
|
|
MOISTENING OF COMPONENT MATERIALS AND SPEED OF DEHUMIDIFICATION
Pospíšil, Tomáš ; Tomáš, Bžoněk (referee) ; Starý, Jiří (advisor)
This bachelor thesis deals with process associated with moisture in electrotechnics. The bachelor thesis is focused on the components and basic materials that are sensitive to moisture and defects caused by moisture in the reflow soldering process. The theoretical part describes the principles of measuring humidity and sorts of absorption. Furthermore this work described the basic classification and defects in components, base materials and packaging material sensitive to moisture and selection of standards dealing with this issue. Another theoretical part is focused on the manipulation with components and materials sensitive to moisture. The practical part deals with the methodology and practical measurement of moisture soaking in the components and materials with respect to their level of sensitivity to moisture. The following part is focused on the methodology of drying, practical measurement of drying and comparing two drying cabinets.
|
|
|
Study of possibilities of hydrofobization of masonry clay blocks for plinth walls
Jirásková, Iveta ; Horský, Antonín (referee) ; Zach, Jiří (advisor)
The work is focused on the design method of hydrophobic cavity brick fittings for the construction of masonry structures, especially plinth masonry and other external structures subjected to elevated moisture. The scope of work is to undertake a literature review of hydrophobic products and methods for reducing absorption of masonry blocks. The work is also practical verification of the effectiveness of selected hydrofobics the brick fittings. The target is to find the optimal method of reducing the absorption of masonry elements, both in terms of the resulting utility properties and economic viewpoint.
|
|
|
The influence of moisture on the thermal properties of the gloves
Janíčková, Žaneta ; Toma, Róbert (referee) ; Fišer, Jan (advisor)
This diploma thesis is focused on the assessment of the influence of moisture on the thermal properties of the gloves. The first part of the thesis deals with the research of topics related to the given issue as well as with the derivation of the computational relations needed for evaluation of experimental measurements. The main focus of the work lies on defining the hypotheses and experiments that are used to verify the influence of moisture on the thermal resistance of gloves. As for the experimental part, it describes the individual methods of moistening the gloves from which the moistening through the air humidity and the moistening by the immersion were analysed. To verify the suitability of selected moistening methods, the tested glove samples were measured on the thermal manikin both in a dry and a moistened state under the conditions defined by ČSN EN 511 and ČSN EN ISO 15831 standards. Individual states were repeatedly measured and afterwards the progresses of thermal resistance depending on time were graphically displayed. The thesis also includes analysis of measurement uncertainties as well as evaluation of measurement repeatability. From the obtained results, both the defined hypotheses and theoretical assumptions about the decrease of the thermal resistance of a textile material due to the influence of moisture were confirmed in the conclusion of the diploma thesis.
|
|
|
Monitoring of the wheat quality for food production
Slavíčková, Radka ; Hýsková, Eva (referee) ; Omelková, Jiřina (advisor)
The aim of this study was to monitor the quality of wheat Triticum aestivum, imported into the laboratory MORAGRO after harvest by eight different suppliers, and to evaluate the main quality parameters decisive for the final use of cereal crops. The introduction of the theoretical part was devoted to understanding commercial and agricultural importance of wheat and description of morphological and physiological characteristics of wheat grain. The core of the theoretical part has been focused on the description and explanation of physical and chemical properties of the wheat grain, which largely affect the final product quality of wheat. External factors affecting final quality and yields of wheat were also commented. The experimental part was based on measurements of main quality parameters of wheat (moisture content, bulk density, falling number, amount of gluten and the wheat proteins, sedimentation value and content of additives and impurities). In most cases, measurements were carried out using automated instruments. The quality of wheat was determined based on the obtained results, which allows deciding, whether it is appropriating for food production.
|
guest ::
