|
|
Hotel Harrachov - annexe gym, earthwork
Vančura, Jaroslav ; Hanzelková, Martina (referee) ; Šlanhof, Jiří (advisor)
The content of this bachelor's thesis is a result of technological stage earthwork by the annexe gym to the actual object VZ Dukla in the city Harrachov. In the side of deep cut into the terrain is designed micropile bracing walls, which prevent landslides in the construction pit. The thesis content a technological prescribe for earthwork, traffic situation, safety and protection of health during the work, a situation of facilities building side. Then there is solved a inspect and probationary plan for stage earthwork, time schedule, budget and machinery draft report. The last one point is voluntary attendance in school competition with the project optimization of mechanical assemblies for earthwork
|
|
|
Exhibition Pavilion
Shánělová, Lenka ; Šmak, Milan (referee) ; Bajer, Miroslav (advisor)
The Master´s thesis contains design of steel construction of exhibition pavilion, which is consists of columns, dome, lantern and suspension footbridge. Building will be intended for organizing exhibitions and conferences by town Trutnov. Two models of variants of dome´s construction are drafted in this work– Schwedler´s and Föpple´s dome. Models are space tubular structures.The work contains static assessment of spatial structures and spherical steel joint in program SCIA Engineer for both variants. Hand assessment of bars, basic details and anchoring, technical report and drawing dokumentation are drafted for selected variant construction with Schwedler´s dome.
|
|
|
The roof structure of a multipurpose hall in Poděbrady
Houška, Daniel ; Puchner,, Josef (referee) ; Šmak, Milan (advisor)
The aim of this the bachelor thesis is a design of the supporting steel structure of the roofing for the multi-purpose sports hall in Poděbrady. Since a wide range of sports will be played in this sports hall, its layout and ground clearance are proposed accordingly. Prefabricated bleachers, which were not the solved in this thesis, will be part of the hall. Supporting facilities for the hall are located in the nearby buildings. It’s a single steel rectangular hall with a cylindrical roof. Curved beams were used as supporting elements. The beams will be filled with rods installed in a perpendicular system. For a structural analysis Sci Engineer 2011.1 was used. Selected elements were assessed by manual calculation.
|
|
|
Steel structure of lookout tower
Pavlas-Jirásek, Václav ; Horáček, Martin (referee) ; Balázs, Ivan (advisor)
The diploma thesis deals with the design of a main load-bearing steel structure of the lookout tower with the height 35,5 m. Two different types of solution were designed. The first design is a spacial truss structure and the second design is a fixed solid cantilever. The first solution was chosen to be further developed. The truss structure has square plan that varies with height. The width is 6,6 m in the level of supports and 3,6 m in the narrowest section. Main bearing members are five pin-supported columns. The base material is steel of class S355.
|
|
|
The Riding Hall in Český Těšín
Junková, Karolina ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
The subject of my diploma thesis is to design timber and steel variants of riding hall. For static assessment was chosen timber. The hall is a one nave building. The dimensions of ground plans is 35,0 m x 75,0 m and the hall is 11.70 meters high. The load-bearing was formed by a curved glue laminated timber trusses. The building is located in Český Těšín, climate loads are designed for the area. The calculation were made in accordance with the Czech technical norms ČSN EN.
|
|
|
Shopping centre entrance area
Čech, Ondřej ; Sýkora, Karel (referee) ; Brosch, Petr (advisor)
Diploma thesis describes the design and assessment of roof structure that covers entrance of the shopping center. Structure has an irregular floor plan and roof height is 16.5 m. The material of the structure is steel S355. The construction is located in Hradec Kralove. Two options were processed that were designed and evaluated according to applicable standards. The work also includes the design of anchoring and selected joints.
|
|
|
Static analysis of a concrete outlet channel
Skalník, Stanislav ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
The thesis deals with the static analysis associated with the outlet channel of the lock chamber. The basis for the work was the design of reinforcement using full-threaded prestressing bars and the drawing documentation of the existing condition. The aim of the work was to present the issues associated with the anchoring of the prestressing bars by cohesion in the existing concrete structure, in particular testing on test blocks in the laboratory to verify a suitable solution. Following the data obtained, to perform an analysis and comparison on models solved by nonlinear computation in ATENA Science software. Subsequently, the analysis of the model of the existing condition of the outlet channel section is also carried out by nonlinear calculation with the evaluation of its behaviour to extreme loads. This model is then supplemented with reinforcement using prestressing bars with application of the knowledge associated with the pullout test models. The model of the pre-stressed outlet channel section is thus a simulation of the design on the lock itself.
|
|
|
The pavilion in the zoo Lešná
Petrík, Tomáš ; Puchner, Josef (referee) ; Šmak, Milan (advisor)
The subject of the diploma thesis is a processed design of a steel construction of a pavilion shaped by spherical segments. The pavilion has exhibition purpose as a part of the zoological garden Lešná, and is intended for African beasts. The design meets architectonical requests - roundness and luminosity. A shape of the pavilion consists of three intersecting cupolas with a frontal curved cut out for glass facade. Construction of the pavilion consists of the radial arranged arched ribs with transversal bars, which are supplemented by horizontal purlins. Forehead of the pavilion is formed by columns and girts. Cladding is designed in combination: aluminum profile and insulated glass. Comparison of alternative steel structure solutions is also a part of the diploma thesis.
|
|
|
Shelter in park
Svršek, Josef ; Šmak, Milan (referee) ; Barnat, Jan (advisor)
This diploma thesis deals with design of the structure of the shelter i the park of city Hranice na Moravě. This load-bearing structure is made of glued laminated wood with the strength class GL24h. The structure has the shape of half ball and the load-bearing beams are in the shape of an arc. This building will be mainly used for cultural purposes. Ground plan dimensions of this shelter are 25x25 m. A complete static design solution including of all connection details and anchoring has been solved.
|
|
|
Load carring structure of a riding hall
Kubíček, Michal ; Straka, Bohumil (referee) ; Sýkora, Karel (advisor)
Master's thesis describes the design and check of the construction of the riding hall. Here are compared two versions the steel structure riding hall. For select version is here technical report, design calculation, statement of material and design documentation. Next is prepared specialization in the field of building construction.
|
guest ::
