|
|
Apartment House
Šťastný, Marek ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The subject of my diploma thesis is elaborating the project documentation for making a new building of a separately standing apartment house. The building is situated on the outskirts of town Bystřice nad Pernštejnem, on a slightly slanting land which goes up to the northeast. The building is without cellar, four-storeyed with a flat roof. On the first floor above ground level there are an indoor garages, cellar units, a staircase and an elevator. On the second, third and fourth floor above ground level there are separate housing units, a staircase and an elevator. There are other parking areas on the exterior of the building. The vertical constructions are designed within the system HELUZ, the horizontal constructions are made of ferroconcrete. The perimeter structures are designed with the contact insulation system. The building will be based on foundations.
|
|
|
Personal elevator for a residential building
Moravec, Josef ; Poledna, Jan (referee) ; Pokorný, Přemysl (advisor)
Master’s thesis deals with application of new suspension means for personal elevator instead of conventional steel wire rope includes calculation of traction. Followed by assessment of passive resistance generated by guiding elevator on guide rails and caused by various locations of suspension and guiding (car guide rails). In the last part of thesis contains a strength analysis of car frame by Finite elements method (FEM) in programme NX I-deas.
|
|
|
Continuous vertical conveyor for transport the goods
Zálešák, Martin ; Bukovský, Radim (referee) ; Kašpárek, Jaroslav (advisor)
This diploma thesis deals with the existing of transportation unit products and designing of a better conceptual solution of continuous elevator with fixed section of a gravity and roller conveyor. This type of conveyor is specified mainly for the transport of boxed products from the lower floor to the another. The diploma thesis is substantiate by the proposal of assemblies machines. It includes a complete 3D design, engineering and functional solution that is supported by basic strength and the check calculations. The attachments consist of the drawings of the proposed facility.
|
|
|
Tail units design of VUT 100 aircraft made out composite
Berka, Martin ; Cejpek, Jakub (referee) ; Mališ, Michal (advisor)
This Master´s thesis describes the design of composite horizontal tail of VUT 100 aircraft. Load calculation and selection of the critical load cases is performed. Internal structure of stabilizer and right elevator is designed. Construction materials are chosen and the structure of the composite materials is proposed. FEM models of stabilizer and the right elevator are created in MSC Patran system and consequently the strength test of the models for the selected load cases is executed using MSC Nastran software and COMPOST.
|
|
|
Design of the elevator drive for storage system LogiMat
Dosedla, Milan ; Hava, Jiří (referee) ; Škopán, Miroslav (advisor)
This diploma thesis deals with the design of the new elevator drive for storage system Logimat. Diploma is focused to design a new drive for a load up to 1200 kg and to adapt the elevator frame to the new drive design. In the first part is done research for suitable drive systems. There are followed by design and stress analysis. The second part deals with appropriate roller chain parameters calculation and the power output of electric motors.
|
|
| |
|
|
Living house
Bouček, Václav ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The aim of my master’s thesis is a project of a new apartment building at a level of the documentation for the structure realization. The thesis contains text, drawings and calculation part. The house is designed as a detached house. Residential house is situated in flat terrain. The building is full basement with four above-ground floor. The house has 16 housing units. The construction system is a combined brick. The structural system of the basement part is made up of permanent shuttering. The floors are of brick blocks HELUZ. In the middle of the building is constructed elevator. The ceiling structure is made of prefabricated prestressed panels Spiroll. The roof consists of single-layer flat roof. The thesis also includes thermal and technical expertise and the calculation of the foundation structure.
|
|
|
The flat - building
Groh, Ondřej ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The master’s thesis deals with the project documentation of a flat building with sweet-shop in Brno - Štýřice. The object is designed as a detached building without basement with four floors. Floor plan of the building is L-shaped, fitted into the equal terrain. In the first floor is a sweet-shop, cellar, stroller storage, waste storage and two flat units. In the other floors are flat units. The structural system is bricks, two-way. The building is covered with a flat roof.
|
|
|
Hotel Apollo in Tatranská Lomnica
Mikuška, Tomáš ; Klubal, Tomáš (referee) ; Ostrý, Milan (advisor)
The diploma thesis deals with project design documentation of a hotel situated in Tatranská Lomnica. The object is designed as a four-story detached building. Object´s ground plan is T-shaped. First floor contains a lobby, a restaurant, a kitchen and a hotel administration part. The other three floors are meant for accommodation. A construction system is based on iron-concrete body shell. Coping consists of a double sloping roof made out of wooden roof trusses.
|
|
|
Multifunctional building
Růžička, Antonín ; Třeštíková, Jana (referee) ; Berková, Petra (advisor)
Diploma thesis Multifunctional building is compiled in the form of project documentation. The building is located in Brno, Vinařská street. It´s a building with four overground floors designed primarily to housing and one underground floor, which is mainly used as collective garage. The building will be made from POROTHERM blocks with the mineral heat insulation. The ceilings will be made of reinforced concrete. The building has a single-layer flat roof.
|
guest ::
