|
|
Analysis of teeth and bones by laser-induced breakdown spectroscopy
Šindelářová, Anna ; Pořízka,, Pavel (referee) ; Modlitbová, Pavlína (advisor)
The presented diploma thesis deals with the elemental composition of hard tissues – human and murine jaws studied by laser-induced plasma spectroscopy (LIBS). Samples of human teeth contained a disease called ankylosis and the difference in elemental composition of healthy and diseased tissue was observed to localize ankylosis in the tooth. When evaluating the map of the spatial distribution of phosphorus and calcium, a decrease in the concentration of these elements in the ankylosis infected area was observed. Furthermore, murine jaws containing lead were analyzed. When assessing the spatial distribution of lead in tissue, it was found that lead was incorporated in murine teeth in the enamel at the tip of the incisor and molars. In conclusion, LIBS method achieved good results considering the detection of the elemental distribution of hard tissues. It enables to differentiate parts of the tooth in terms of elemental composition and tissue hardness and also to detect changes in the matrix caused by a disease or bioaccumulation of heavy metals.
|
|
|
Detection of luminescent nanoparticles in plants by laser spectroscopy
Střítežská, Sára ; Novotný,, Karel (referee) ; Modlitbová, Pavlína (advisor)
This diploma thesis deals with evaluation of toxicity and bioaccumulation of photon-upconversion nanoparticles (UCNPs) in model plant maize (Zea mays). Lanthanide-doped UCNPs with different composition and size were tested in three different concentrations in this work. The exposure took place for 168 hours. Toxicity was assessed based on four macroscopic toxicological endpoints (mortality, the length of belowground part of the plants, the length of aboveground part of the plants and whole plants length). Spatial distribution of elements yttrium, ytterbium, erbium and gadolinium in model plants was determined using laser induced breakdown spectroscopy with spatial resolution of 100 m and 26 m. Distribution of UCNPs in plants was further studied with photon-upconversion microscanning with spatial resolution of 40 m. Stability of UCNPs during and after the plant exposure was also discussed in this thesis.
|
|
|
Korelace charakteristických signálů laserem buzeného plazmatu
Terschová, Vanda ; Novotný, Karel (referee) ; Pořízka, Pavel (advisor)
Laser-induced breakdown spectroscopy (LIBS) is a fast analytical method, but can also be complicated. This spectroscopic method is used to provide a qualitative and quantitative analysis of a sample. The analysis is carried out by capturing the emission radiation of the generated plasma. The accuracy and stability of the measurement is affected by several parameters, such as stability of the laser, physical and chemical properties of the sample, its homogeneity and others, that can not always be eliminated. For this reason other methods are being added to the LIBS experiment that could improve the quality of this analysis. This diploma thesis is focused on a research of the literature on the standardization of laser-induced plasma signal and the possibility of using an acoustic signal for this purpose. For this reason , it is necessary to perform basic experiments and to verify if the acoustic signal correlates with the emission signal. If these signals correlate together, it would be possible to use the acoustic signal for standardization og the LIBS data, which would improve the accuracy of the analysis. In the theoretical part at the beginning other spectroscopic methods are summarised. Then the work is focused on the description of the LIBS method, possible ways of the analysis, standardization of emission signals and its review in the literature. The experimental part is aimed at the study of the acoustic signal that was performed in the framework of this study. At the beginning, there are introduced results of the basic measurements on steel and brass samples. These results were important for an optimization of the experiment. The following section shows the results obtained from the measurements of the acoustic signal on the samples with the same chemical composition but different hardness. At the end the correlation between the acoustic and emission signals is discussed.
|
|
|
Impact of the atmosphere on laser ablation of matters
Černá, Svatava ; Hrdlička, Aleš (referee) ; Pořízka, Pavel (advisor)
This thesis deals with a general overview of laser-induced breakdown spectroscopy - ablation of material and plasma formation when a change of the surrounding environment occurs. The aim is to establish ideal conditions for improving detection, which is difficult for some elements when the measurement takes place in the ambient atmosphere. This is the reason why we change the ambient conditions, the gas (air, helium, argon) and its pressure. Buffer gases (helium, argon) influence the development of the material ablation and quality of generated plasma. That is why we inspect the changes in the signal according to particular atmospheres (signal change in buffer gases compared to the ambient atmosphere). The first part of the thesis presents the principle and physical nature of laser ablation with a brief search of experiments performed so far for similar purposes. Based on this search we determine conclusions about the influence of buffer gasses and pressure on the detection used gasses. In the second part of the work, the controlled experiment is presented, which consisted of the detection of spectral lines of fluorine and potassium, see chapter 5.6 and molecular transitions of calcium fluoride, see chapter 5.10. In a controlled experiment, we established two assumptions. The first assumption is the influence of the inert gas atmosphere, which should significantly improve the detection of fluorine and potassium compared to the air atmosphere. We confirmed this finding only for the argon atmosphere. In contrast, in the helium atmosphere, the detection of none of the elements improved. The second assumption is the effect of reducing the ambient pressure, which in combination with an inert gas should allow the detection of fluorine even at low concentrations in the sample. We consider the measured glass disk in chapter 5.7 to be such a sample. This assumption is not confirmed, as the increased intensity of the fluorine spectral line does not manifest itself in any way when the pressure in the vacuum chamber decreases. Finally, in chapter 7 from the results of individual parts of the experiment, the most suitable conditions for the future detection of the measured substances were proposed: fluorine, potassium and calcium fluoride molecules.
|
|
|
Analysis of biotic matrices by Laser-Induced Breakdown Spectroscopy
Střítežská, Sára ; Karel,, Novotný (referee) ; Modlitbová, Pavlína (advisor)
This bachelor thesis discusses the possibility of using Laser-induced breakdown spectroscopy (LIBS) for biological application. The LIBS method was used to determine spatial distribution of a chosen element, cadmium, in selected model plant, white mustard (Sinapis Alba L.) The exposure took place in hydroponic conditions and lasted for 72 hours, therefore it was an acute toxicity test. Three different sources of cadmium were tested, mercaptopropionic acid stabilized quantum dots (CdTe QDs), silica coated quantum dots (CdTe/SiO2 QDs), and cadmium chloride, which was used as a positive control. After the exposure and before determination of the spatial distribution of cadmium in plants, a significant portion of the thesis was devoted to optimization of selected parameters of LIBS measurement (laser energy and gate delay). Subsequently, the cadmium distribution was determined and the obtained results were discussed with regards to the tested substance, its stability and its tendency to aggregate/agglomerate in water medium in contact with testing organism during exposure. In the final part of the work, the suitability of the LIBS method for the determination of spatial distribution of chosen contaminants was evaluated.
|
|
|
Approaches to signal correction and standardization in laser spectroscopy
Schiffer, Štěpán ; Hrdlička, Aleš (referee) ; Pořízka, Pavel (advisor)
The subject of this diploma thesis is the study of a sample position influence on results of an experiment in laser spectroscopy. The aim is to design an appropriate way for standardization of signal obtained at different conditions with the respect to its applicability for stand-off analysis. In the theoretical part of the diploma thesis there are the basics of LIBS method described together with the issues of stand-off experiment and both, basic and advanced approches for the processing and correction of obtained spectra. Also the experiment is designed here, which is used for the analysis of the sample inclination and distance influence on the detected signal. The choice of appropriate ways for the signal correction follows and their applicability and efficiency is then experimentally tested.
|
|
| |
|
|
Software for the Spectroscopy Method LIBS
Vyroubalová, Jana ; Mráček, Štěpán (referee) ; Orság, Filip (advisor)
This thesis discusses creating of software for the LIBS spectroscopy method (for an electronic chamber). In the first part the reader will learn about the LIBS method and about a short description of a workplace, where the project is being created. Then I write about an application design for laboratories, which are going to use this method. Next I describe an implementation of software, where the reader can find some details about used algorithms for autofocus (an evaluation of image sharpness and an iterative determination of the position of the camera). The end of this work is focused on the assessment of GUI and testing the application.
|
|
|
Creation of spectral lines database of selected standards for Laser-induced Breakdown Spectroscopy (LIBS) and double pulse Laser-induced Breakdown Spectroscopy (DP LIBS)
Mazura, Martin ; Sládková, Lucia (referee) ; Kaiser, Jozef (advisor)
Laser-Induced Breakdown Spectroscopy (LIBS) has a great potential across a different fields of use. Wide use of this method is still complicated because of some problems. The most important problem is difficult analysis of obtained measurement results. Nowadays mostly used analysis is based on comparison of measured data with databases created in different way. This bachelor’s thesis deals with creation of spectral lines database for LIBS and it also shows the methodology for spectral lines database assembling. Theoretical basis of the method and experimental setup used for measurements is described in the first part of this thesis. Further, there are described measurements of standards and creation of database. The result of this work presents a database of spectral lines containing 14 elements and more than 500 spectral lines. In order to illustrate database utilization it was established composition of an unknown sample.
|
|
|
Modification of Targeting Camera for a Remote Laser Spectroscopy
Klempa, Tomáš ; Ficza, Ildikó (referee) ; Brada, Michal (advisor)
The bachelor thesis deals with the modification of targeting camera for remote laser spectroscopy. Targeting camera will be used on remote laser spectroscopy unit to study its features in laboratory of Institute of Physical Engineering on University of Mechanical Engineering Brno and to study the affect of external environment to analytic ability. The thesis contains a brief overview of the current stage of knowledge, designs of stroctural variations and the description of parts of designed device.
|
guest ::
