|
|
Residential Building Renovation
Horn, Jiří ; Stránská, Zuzana (referee) ; Struhala, Karel (advisor)
The aim of this diploma thesis is a renovation of a two-story family house in Dolní Krupá. The original house is from 1935. It has several newer outbuildings such as garage or storage spaces. The walls are made of solid fired bricks. There is a timber joist floor structure. The main building has a gable roof with timber roof truss. The outbuildings have flat and mono-pitched roofs. The reason for the renovation is the inefficiency of the aging building combined with nearing end of life of some building elements. Also, the layout of the building with multiple outbuildings built during its service life does not comply with contemporary housing standards. Therefore, a large part of the building will be demolished and replaced with new structures. Only the load-bearing walls on the first floor of the main building and the part of the building adjacent to the garage will remain. The new layout will consist of two separate apartments (one on each floor). The load-bearing structures will include ceramic masonry and reinforced concrete floor. The roof truss will be made of wood. The original appearance of the object will be preserved. The house will be heated with an air-to-water heat pump installed next to the north facade of the house. Each floor of the house will be air conditioned by a separated air conditioning unit. As the third part of the work, I chose a life cycle assessment (LCA), using several different building materials for a this renovation.
|
|
|
Providing measured documentation of existing structural and technical conditions of a single-family house in Brno
Zahradníková, Lenka ; Najt, Eduard (referee) ; Šmahel, Milan (advisor)
The diploma thesis deals with the passport of family houses and its creation. The first part describes the building condition survey from a theoretical point of view, its advantages, purposes and sorting, possible owners and so its legislative background. Thereafter it describes in detail the procedure of making the passport and applies the procedure on a particular family house in Brno. Medium passport of the family house focuses on describing the structural and technical condition. It also describes the current faults, errors and methods whose reveals them. Subsequently, the proposals for solution of these adjustments follows together with the resolution of emergency in specific cases.
|
|
|
Analysis of Thermoplastic Pipes in a Soil Environment
Ekr, Jan ; Kuklík,, Pavel (referee) ; prof. Ing. Alois Materna, CSc., MBA (referee) ; Gratza, Roman (advisor)
The doctoral thesis deals with an analysis of thermoplastics pipes in a soil environment, in particularly, pipes performed by using trenchless technologies. In the doctoral thesis, experiments of polyethylene pipes loaded by external hydrostatic pressure were performed. The aim of the experiments was to determine a behaviour and load-bearing capacity of the polyethylene pipes loaded by external hydrostatic pressure. For the experiments, a steel pressure chamber was designed and produced which allowed loading and observing a pipe during its loss of the stability. Mechanical properties of the pipe material were determined based on the tensile and bending tests. The series of detailed numerical analyses of the pipe experiments were performed. Various material models which take into account elastic, plastic and viscous behaviour of thermoplastic materials were used. In addition, series of standardized calculations of polyethylene pipes installed using trenchless technologies were performed. The aim was to create new design diagrams for practical assessment of these pipes placed in the partially deteriorated old pipes. In the case of the deteriorated old pipe, a numerical model for determination of design coefficients was created. These design coefficients were verified with standard values. Then, the results of the numerical model were compared with the results of the more complex numerical model which better take into account pipe-soil interaction of various soil types.
|
|
|
Rehabilitation of sewer networks with the implementation of elements for rainwater management
Brychta, Kryštof ; Malaník, Stanislav (referee) ; Raclavský, Jaroslav (advisor)
This thesis focused on the possibilities of rehabilitation of the sewer network with the implementation of rainwater management elements (HDV), respectively blue-green infrastructure (MZI). In the first part of the thesis, the most used rehabilitation methods are reviewed and the rainwater management respectively blue-green infrastructure elements are divided and described. In the second practical part of the thesis, the acquired knowledge is applied to the study of the rehabilitation of the sewer network with the implementation of elements for rainwater management in the street Pod Soudním vrchem in Znojmo. A suitable rehabilitation technology (CIPP lining) was designed and economically evaluated for the site of interest and elements for rainwater management (two underground retention tanks and one underground infiltration retention tank) were designed and implemented, for which investment costs associated with the construction were determined.
|
|
|
The Renovation of the former District Court in Zlín
Boček, Adam ; ing.arch. Lukáš Ležatka, Ph.D (referee) ; Pavlovský, Tomáš (advisor) ; Novotný, Miloslav (advisor)
Based on study, developed in the course of the AG34 third year, is compiled following thesis, which expands the study into stages of documentation for building permit and documentation for the execution of the project. Theme of thesis is renovation of the former District Court in Zlín and propose a new use. The building is located in the city center on the edge of Sad Svobody. In the vicinity of the area there is Castle Zlín and recently renovated Sad Komenského. Sloping plot of land in the area was modified to enable new usage of the object. The idea is to propose new usage, which will be real and interesting investment for potential investor of the project. The pursuit of inexpensive structural changes and adjustments wich will allow the best and most profitable use of the currently abandoned building. New uses are therefore rentable office space, exhibiton space, restaurant and residential units. Even though the building is not protected historicaly, the design works with the restoration of the historical appearance of the former district court.
|
|
|
Sports center and renovation of the sports complex "Start" in Kyiv, Ukraine.
Krasnikov, Yevhenii ; Petelen,, Ivan (referee) ; Marek, Jiří (advisor)
The diploma thesis deals with the design of a sports center building in the area of the Start stadium in Kiev, using the maximum development area that allows the plots, with regard to distances and protection zones. The territory of the stadium complex is owned by the city of Kiev. In recent years, several projects for the modernization of the sports center have been proposed to the city, but the city has only carried out a partial reconstruction, which concerned only the replacement of the stadium's asphalt paving. The stadium's grandstands have been in need of repair for a long time. The condition of the turf of the football field does not allow football sports events. The park zone does not meet the requirements for the rest of modern man. The stadium complex is located in a densely populated and developing part of the city, with a well-developed transport infrastructure. The location on the mentioned plot of the building of a modern sports complex corresponds to the interests and needs of the inhabitants of the city district and the city.
|
|
|
Renovation of Historic Vehicle Praga
Žilinský, Ondřej ; Drápal, Lubomír (referee) ; Dundálek, Radim (advisor)
The aim of this bachelor's thesis is to elaboráte a metodology of basic tasks of historic vehicle renovation. It also provides a brief overview of the history of the famous car factory Praga. It describes a method of renovation of a specific vehicle’s chassis including a list of main problems of renovation and description of construction of a new car body because the old one has not been preserved.
|
|
|
The restoration of Trabant 601 Historic Vehicle
Krček, Štěpán ; Janoušek, Michal (referee) ; Dundálek, Radim (advisor)
The aim of this thesis is to create a technical procedure for the renovation of the automobile Trabant 601 and to subsequently describe the use of this procedure in practice. The first part describes the history and development of the car manufacturer VEB Sachcenring Automobilwerke Zwickau. This is followed by the history of the automobile Trabant 601 with the description of manufactured variants. The contents of the subsequent chapters are the technical descriptions of the vehicle and of the procedure for its renovation. The whole process of renovation is substantiated by photographic documentation. The last part includes financial assessment of the whole project.
|
|
|
Rehabilitation of sewer networks and sewer connections
Brychta, Kryštof ; Lžičař, Jakub (referee) ; Raclavský, Jaroslav (advisor)
This bachelor thesis is about approaching the possibility of rehabilitation of the sewer network and sewer connections. The bachelor thesis is divided into two parts. The first part describes the basic division of the most used methods for rehabilitation, repair and renovation of sewer network. In the second part, the acquired knowledge is applied to the rehabilitation of a part of the sewer network in Znojmo, Rumunská - Slovenská street. Two methods of rehabilitation (CIPP lining, open excavation) were selected for the site. An economic comparison was made for these methods.
|
|
|
Škoda Octavia Super
Netopil, Jan ; Nedoma, Jiří (referee) ; Kaplan, Zdeněk (advisor)
My work contains a comprehensive aggregate of knowledge which is needed for a renovation of a car Skoda Octavia Super. It provides a description of the construction and an execution of a chassis, a transmission, an engine and accessories of the car for individual manufacturing sets, next is a description of a colour execution and a superficial modification. I put emphasis on the identification of all mechanisms and Skoda Octavias accessories (the eighth manufacturing set). The right execution approximates many photographs, a function of the transmission of a functional scheme. All mentioned pieces of knowledge are based on studying of a period literature, a catalogue of spare parts, a contemporary literature and verifying information in the Skoda Octavias museum and in veterans clubs. This work also pays attention to issues of the renovation of the car and its financial demands, options how to use additive technologies during the renovations of cars. In conclusion is evaluated a condition of renovated Octavia Super, year of production 1960, carried out a checking measuring of selected mechanisms and worked out a budget of the renovation. The work brings theoretical knowledge which is needed for returning of the car, Octavia Super, to the state as it was made.
|
guest ::
