|
|
The process of decompression in hydraulic systems of forming machines
Havelka, Milan ; Habán, Vladimír (referee) ; Pochylý, František (advisor)
This thesis consists of two main parts. The first part is a theoretical analysis, or a literary research, it is focused on the physical properties of the fluid, which have direct impact on the decompression. The aim of the second part is to evaluate the measurement of the forging valve and subsequently simulate the issue by means of CFD. The first simulations were performed for the maximal valve stroke and used for the CFD solver setup calibration. The subsequent analyses dealt with possible openings of the valve. In the final chapter the theoretical impact of the liquid compressibility and of the undissolved air is discussed. The results of the thesis can prove useful for the new valve setting in hydraulic circuit or for possible geometry modification.
|
|
|
Hydroforming machine for non-ferrous material tubes
Ocelík, Jakub ; Holub, Michal (referee) ; Knoflíček, Radek (advisor)
Master`s thesis deals with unusual high-pressure-fluid forming technology – hydroforming. There are discussed factors, which are affecting forming process, and there are made conclusion of it for machine design process. There is also made an evaluation of tube hydroforming technology in nowadays. The objective of thesis is to design new forming machine for tube hydroforming and for use in bicycle frames design. The machine is to be determined for manufacturing series up to 1000 pieces. Based on calculations and discussion of hydroforming technology, the best design solution is chosen. Machine is designed as modular conception with pressure multiplication of forming fluid right in die cavity. There is no need to use high pressure pump for forming fluid, used in common machines for tube hydroforming. This leads to cost reduction and so the objective of thesis is accomplished.
|
|
|
Forming Machine Control System
Vaško, Jiří ; Fojtík, Pavel (referee) ; Kučera, Pavel (advisor)
This master thesis deals with the implementation of the control system for the forming machine used in producing of confectionery forms. The introductory part describes the forming machine from the point of important control elements. The second part is associated with the hardware design of the control automat and description of main functional units on the control PCB, as well as on other PCBs. The following text presents the communication protocol between the control automat and PC and after that there is a description of the CPU firmware. The final section brings the characteristics of the PC application for a connection with the automat.
|
|
|
Energy machines for forming technologies
Koukal, Vojtěch ; Varjan, Matúš (referee) ; Podaný, Kamil (advisor)
The bachelor thesis provides characterization of energy machines, basic division and a brief overview of the various types of energy machines used in metal forming. Used machines are characterized in this thesis. Basic description and principle with examples of practical usage are stated for each type of energy machines.
|
|
|
Power machines for forming technologies
Sejkora, Petr ; Varjan, Matúš (referee) ; Podaný, Kamil (advisor)
The bachelor thesis provides characterization of power machines, basic division and a brief overview of the various types of force machines used in metal forming. Used machines are characterized in this thesis. Basic description and principle with examples of practical usage are stated for each type of power machines.
|
|
| |
|
| |
guest ::
