|
|
Detached house
Dyntarová, Aneta ; Dohnal, Jakub (referee) ; Jelínek, Petr (advisor)
The subject of this bachelor thesis is the preparation of project documentation at the level of construction implementation. The aim was to design a family house with almost zero energy consumption. The new building was designed on a flat building plot on the outskirts of Mlázovice. The family house has two floors with a partial basement and is designed for family of four people. The residential part of the house is roofed with a gable roof with a covering made of ceramic tiles. The garage situated on the north side of the building has a vegetated flat roof. The main load-bearing system is made of ceramic blocks. The perimeter basement masonry is made of lost formwork blocks. Thermal insulation of the building is solved by contact insulation system.
|
|
|
Detached house
Stoklas, Vojtěch ; Bečkovský, David (referee) ; Nespěšný, Ondřej (advisor)
The topic of the bachelor's thesis is the preparation of project documentation for the construction of a family house in Hustopeče nad Bečvou. The structure is designed as a detached, two-story, non-basement house with nearly zero energy consumption, intended for individual living for a family of four. The rectangular floor plan is situated in the center of the building plot and respects the character of the surrounding development. The house is designed on strip foundations made of plain concrete, supplemented with permanent formwork blocks and a base slab. The vertical load-bearing and non-load-bearing structures will be made of calcium-silicate blocks. The horizontal load-bearing elements consist of a monolithic reinforced concrete ceiling slab and a ring beam. Above the second floor is a sloped load-bearing roof structure – a wooden truss. The family house is insulated using an external thermal insulation composite system. The layout of the house corresponds to 4+KK. On the second floor, there is a master bedroom along with two children's rooms, a study, a corridor, a bathroom, a toilet, and an occasional bedroom. The master bedroom also includes a dressing room. On the first floor, besides the corridor, bathroom, toilet, and utility room, there is a living room connected to the dining area and kitchen. A pantry is located under the staircase connecting the two floors. The entrance hall connects the living space with an attached garage, which can hold up to two cars.
|
|
|
Small apartment building
Bartoň, Vojtěch ; Bečkovský, David (referee) ; Vystrčil, Jan (advisor)
The subject of the bachelor's thesis is the processing of the design documentation for the construction of the apartment building. The building is located on the outskirts of the prštné města Zlín. The building is designed as a detached masonry building roofed with a flat green roof. The new apartment building has 3 above and 1 underground floors. There are 13 housing units of various sizes and layouts for a total of 30 people. The building is designed as a traditional masonry structure. The basement, ceiling structure and staircase are designed as monolithic reinforced concrete. The entire apartment building is equipped with the contact insulation system ETICS. The building was assessed for building physics and fire safety.
|
|
|
Apartment building
Pokorný, Václav ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor’s thesis is the design of apartment building and the development of project documentation at the level of documentation for construction building. The new apartment building is located on the outskirts of Jihlava in the Helenín district. The building is designed as five floors building with a partial basement. It contains 12 apartment units with dispositions of 2+kk, 3+kk, 5+kk, which complement cellar cubicles and common areas for the residents of the building. The entrance to the building is located on the north side of the building. Vertical load-bearing and non-load bearing walls are designed from ceramic blocks of the POROTHERM system. The walls of the lift shaft are designed as cast-in-place reinforced concrete. The ETICS insulation contact system will be used to insulate the building. The foundation strips are designed from plain concrete and are connected to the partial basement part of the building with gradations. The foundation slab under the lift landing is designed from reinforced concrete. The horizontal structures are designed as cast-in-place reinforced concrete two-way slab and cantilever slab (at loggias). The roof of the building is designed as a single flat green roof (extensive). Within part of bachelor’s thesis is too designed construction physics and the fire safety solution of the building. Materials and colours were selected in accordance with the surrounding buildings.
|
|
|
Detached house Hodějovice
Osvald, Karol ; Vajkay, František (referee) ; Brzoň, Roman (advisor)
The aim of the bachelor´s thesis is to design a energy efficient single-family home. The project is divided into two parts. The first part is project documentation for building permission, and the second is focused on building services. Part of building permission is fire safety, acoustic, daylight assessment and assessment of constructions from thermal technology stand point. Location of this project is in Hodějice in southern area designated for such buildings. Site is sloped with height difference approximately 3 meters. For that reason part of building is cut into terrain. Shape of the building consists of two block shaped masses connected together creating Z shaped blocky footprint. Ground floor functions as social zone and first floor as private zone. Social zone consists of kitchen, dining room and living room all of which are illuminated through glass wall facing east into private garden. The vertical members are masonry made of ceramic blocks insulated with ETICS. Horizontal load-bearing members are made of ceramic/pre-stressed concrete beams and ceramic blocks combined with reinforced concrete slabs. Building is divided into two zones, heated and unheated. Heated zone consists of wind lobby, social and private zones. Unheated zone consists of garage and utility room. Heating is designed as floor heating supplied by domestic hot water from heat pump (earth/water), (vertical collector). Air conditioning is also provided by floor system complimenting recovery of geothermal well. Heated zone is equipped with heat recovery ventilation unit. Rainwater is collected in stormwater storage tank with overflow directed into infiltration object. To passively prevent interior overheating external venetial blinds are designed for all of east facing glazing.
|
|
|
Detached house near Litomyšl
Simon, Matěj ; Kolář, Radim (referee) ; Jelínek, Petr (advisor)
The aim of this Bachelor’s thesis is to design a two-storey, single-family, near-zero-energy house, located in Čistá u Litomyšle. The thesis has two parts. The first part presents architectural and structural design, comprised of technical drawings, fire safety design and building physics. The second part presents a detailed design of sanitary installations a concept design of all the other building services and energy performance certificate. The house is located on a flat plot. It has a gabled roof with a dormer, a pitched green roof over a car shelter and a garden storage connected on the northern side. The ground floor comprises of an entrance, a guest room, a bathroom, a utility room, a living room with a kitchen and a pantry. The private zone is located on the first floor. It is made of a master bedroom with a walk-in closet, an office, two bedrooms, a bathroom, and a laundry room. The vertical structures are made of sand lime bricks, external walls are insulated with Twinner panels- EPS covered by a layer of MW. The roof in insulated with PIR. The horizontal structures are made of cast-in-place reinforced concrete. The house has a foundation slab insulated with foam-glass gravel. The main heat source of the house is an air-water heat pump, supplemented by a stove in the main living area and electric heating elements for hot water. The house is mechanically ventilated by a unit with heat recovery. There are photovoltaic panels installed on the roof. Rainwater is collected from the roof and stored for use in flushing and irrigation. Wastewater is treated by a household wastewater treatment plant, and it is infiltrated on site.
|
|
|
Detached house in Horní Stakory
Hornychová, Anna ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The aim of this bachelor thesis is to design a nearly zero-energy detached house. It is located in Horní Stakory near Mladá Boleslav. The project is divided into two parts. The first part is the documentation for the construction of the building. The second part focuses on the internal environment of the house especially the heating system. It is a two-storey L-shaped building with an attached garage with a flat roof. The main part of the building has a gable roof. The first floor of the building is designed as a living area – living room, study or guest room, bathroom, utility room. The second floor is designed as private – bedrooms, bathroom and WC. The building is based on concrete foundation strips. The vertical structures are masonry made of sand-lime bricks. The building is insulated with the ETICS. Horizontal load-bearing structures are made of reinforced concrete. Heat losses through ventilation are eliminated using a mechanical ventilation unit with heat recovery. The heat pump will heat the supplied air and provide water heating for the underfloor heating. The main building will be heated by underfloor heating supplemented by electric towel heaters and occasionally by an electric heater in a non-heated garage. Solar panels will heat the hot domestic water. Electrical energy will be supplied from photovoltaic panels located above the garage and from the grid. Rainwater will be accumulated in a storage tank and used further for watering. The excess rainwater will be soaked up.
|
|
|
Apartment building
Kužmová, Alica Viktória ; Harčáková, Klára (referee) ; Brukner, Bohuslav (advisor)
The subject of the bachelor's thesis is the new work of an apartment building in the center of Košice on Hutnícka street. The terrain of the parcel is mostly flat. The building has four aboveground floors and one underground. The project includes 19 apartment units ranging in size from 1+kk to 3+kk, each with a terrace, balcony or loggia. In the underground floor there is a complete infrastructure of the apartment building and a collective garage with 19 parking spaces. The construction system is a board frame with hidden bridgings. The perimeter structures in the basement are made of reinforced concrete, the upper floors have vertical infill structures made of ceramic blocks. The load-bearing capacity is ensured by columns and a stiffening core. Horizontal structures are made of monolithic reinforced concrete slabs. The foundations are formed by a base plate with an extension under the supporting columns. Roofing is provided by two flat vegetation roofs with extensive greenery at different height levels. The building is insulated using the ETICS system.
|
|
|
Preparation and Implementation of the Envelope of the Kindergarten Building in the Village of Mojš
Briš, Michal ; Jílek, Jan (referee) ; Mohapl, Martin (advisor)
The topic of the bachelor’s thesis is the Preparation and Implementation of the Envelope of the Kindergarten Building in the Village of Mojš. This thesis deals with the installation of windows and door fillings, the insulation of the plinth, and the facade using an external thermal insulation composite system (ETICS). The work includes a technical report, a site plan with broader traffic relations, a bill of quantities for the specified technological stage, a technological prescription for the facade insulation stage, including resource balances. Furthermore, it contains a solution for the organization of the construction, including a site equipment drawing, a time schedule for the given technological stage, a proposal for the machine set, a control and test plan, and ensuring work safety. In conclusion, the thesis discusses the use of aerogel as an insulating material.
|
|
|
Apartment building
Balát, David ; Zumr, David (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor thesis is the elaboration of project documentation in the stage of construction implementation. The proposed apartment building is located in Brno, in the urban area of Bystrc, district Brno-city and is located on a plot with sloping terrain. The residential building is designed as a detached five-storey building with a flat roof. The individual floors are divided as follows, one underground floor serving as a collective garage with a total of 15 parking spaces including one for disabled persons, there is also a technical background of the apartment building, in the form of a technical room and an air-conditioning room. Furthermore, the building consists of four floors, the first contains 4 separate commercial premises with its own sanitary facilities, the other each floor contains 4 residential units including one apartment adapted for wheelchair users. A total of 12 residential units of different layouts are proposed in the apartment building. The individual floors are connected by a monolithic staircase and a rope elevator without a machine room. The structure of the building is designed as a wall structure, combining monolithic walls in the underground floor and ceramic masonry in the above-ground floors. A contact insulation system ETICS is designed. The ceilings are monolithic reinforced concrete. The roof is designed as a flat single-skin roof with ballasted aggregate. The building is based on a foundation slab.
|
guest ::
