|
|
Stress - strain study fo tractor body
Šnejdar, Radim ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This master thesis deals with the creation of a computational model of the load bearing part of the tractor and the subsequent implementation of the stress – strain analysis. In terms of critical working conditions, it is focused on three different load cases. Based on the results of the numerical simulation, the optimization of key components is further proposed. Modifications of the model and individual simulations of the operating conditions of the tractor body are performed in the Ansys program. Finally, an evaluation of the results, including their comparison, is made.
|
|
|
Study of large trucks for road transport
Božik, Michal ; Škopán, Miroslav (referee) ; Kubín, Martin (advisor)
This work is a study of large-scale trailer and semi-trailer units with a total length of 25.25 meters. It contains an overview and comparison of legislative requirements and transportation capacity. It introduces description of the various units, their specific features and estimate of the contribution of using these trucks to the traffic.
|
|
| |
|
|
Lifting equipment for a tractor
Smrček, Jakub ; Škopán, Miroslav (referee) ; Kašpárek, Jaroslav (advisor)
Main aim of bachelor’s thesis is mechanical design of tractor attached telescopic loader crane used for moving materials. Introductory part of the thesis contains description of lifting equipment for tractors that are actualy produced. Main part of thesis is focused on design of loading crane itself. Whole design is based on strength and control calculations of choosed areas of the loader. At the end are drawings of whole assembly and components of developed telescopic tractor loader.
|
|
| |
|
|
Corporate identity of a tractor manufacturer
Hopfingerová, Ivana ; Chorý, Tomáš (referee) ; Rajlich, Jan (advisor)
This diploma thesis deals with corporate identity of a tractor manufacturer. For this purpose fictive company called Haart was created. The endeavour of this corporate identity is to make an image of a reliable company which specialises in the production of high-quality agricultural machines. This is accomplished by an orange-grey colour scheme where orange stands for living (agricultural production) and grey refers to lifeless (tractor is a machine). The final corporate identity is presented next to company stationery, merchandise, orientation graphics and web page also on the tractor designed within the pre-diploma project. For advertising graphics needs typeface Haart was created. Part of this diploma project is also the creation of a design manual. It describes all elements of Haart‘s corporate identity.
|
|
|
Tractor Engines Intake Systems Overview
Pacovský, Tomáš ; Svída, David (referee) ; Dundálek, Radim (advisor)
The main focus of this work is creation of textual and pictorial documentation of equipments used on nowadays tractor engine intake systems. Firstly author is focused on introduction of individual parts of intake system with their detail function description and pictorial documentation. After that the separate intake systems overview is made via world known tractors such as Case IH, Deutz – Fahr, John Deere, Massey Ferguson and New Holland. Every representative of tractor is introduced with its overview and pictures of the most significant parts concerned with inletting of air into the engine. The entire pictures documentation of intake systems overview is made by camera at the place of tractor’s dealer and when this photo documentation was unsatisfactory, the www pages of dealers was used. This bachelor’s thesis should show the progressive development of intake system’s individual equipments. Eventually this thesis can be used to evolve another research projects.
|
|
|
Cleaning equipment for the road signs
Kuře, Radim ; Škopán, Miroslav (referee) ; Kašpárek, Jaroslav (advisor)
The main aim of this bachelor thesis is to design the construction of cleaning equipment for the road signs. Introductory part of thesis contains tractors which are used in road maintenance and similar equipment in this area. The main part is dedicated to design of cleaning equipment for the road signs.
|
|
|
Lifting equipment for a tractor
Zálešák, Jiří ; Pokorný, Prokop (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with the design of the device carried by a tractor which will be used for material handling. Aggregation is solved using the three - point hitch of the tractor. The load carrying capacity is 1000 kg. The thesis contains a 3D design, a constructional solution, which is based on strength and control calculations, and technical drawings.
|
|
|
Design testing stand during the tractor manufacture
Trgiňa, Michal ; Kadlec, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
In diploma thesis is general design testing stand during the tractor manufacture, centred on design and calculation main skeleton and strength calculation. Thesis include particular calculation and concrete design parts of measure stand, design and calculation main skeleton, strength calculation, drawing dokumentation of main skeleton and selected parts of measure stand. Thesis also include picture of 3D model whole of measure stand like appended documents.
|
guest ::
